NEW: SRT VIPER GEN 5 - GEN 4 RACE HEADERS BBG STYLE (Teaser Photos)

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Gentlemen,

With all the Performance Wars and Hype going on between manufactures such as GM and Dodge (ZR-1 vs. SRT VIPER) we at BBG have been busy in the Garage designing, engineering and building the solution to end the controversy, Bad Boyzz Garage's New SRT VIPER Gen 5 - Gen 4 Race Headers! Please note that these photos of our working proto-types built for dyno purposes and "are not our finished product".. Made Inhouse BBG USA..:usa:


Feel free to call me direct if intersted in discussing our new race header program for your Snakes high end engine build and our other products (BBG Race Ported Cylinder Heads & Intakes, New BBG Triple Disc Race Clutch Kits, Race Prepped Trans & Diffs, Suspension and Accessories)..

Thanks for your consideration,

BAD BOYZZ GARAGE
Toddy Gomez
1337 North Market Blvd. Ste 100
Sacramento, Ca 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:


Here's a look behind the scenes before we go to the dyno and prove it!! Stay tuned for results and more products hitting the Tracks this race season..











 

Moundir

Enthusiast
Joined
Oct 3, 2002
Posts
1,816
Reaction score
0
Location
Ny
Looking forward to the dyno results! Great work Toddy!
 
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Thnx, for all the positive comments gentlemen.. My goal is and has always been quite simple, build the best components possible for our Viper's! With the introduction of the new SRT Viper 5, I felt the need to build the best header program possible to compliment SRT's efforts. By raising the bar of our engineering and quality level at BBG we should hopefully catch SRT and their Italian conterparts attention at Ferrari, so they can see how the dedication of a small American company such as BBG can step up to the plate and be a beneifit for their brands future performance developement.

Our new Header program is engineered to compliment the Viper's cylinder head exhaust ports and produce maximum HP and TRQ in N/A race & street engine builds.. Ferrai 150, Audi A8, Porsche GT-3, Austin Martin V12, Lamborghani quality yet fabricated to handle the abuse and power levels that our V10's deliver.. These headers are the real deal and will be a must have for the serious race teams, ALMS endurance race series, mile cars, drag strip and street snakes who believe in no compromise, quality first and plain just want to out perform the competition!

"High Performance Viper Parts Built for the Viper Nation by a Viper Owner!

Thnx,

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca. 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:
 
Last edited:
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Jealous! Wish I had a set for Texas!

Mr. Boxer12,

No problems, give me a shout and I'll build you a set for this years race season.. Anyone interested just pick up the phone or shoot me an email and let's talk about getting that competitve edge your looking for on race day!


Thnx,

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd, Ste 100
Sacramento, CA 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:
 
Last edited:

TrackAire

Enthusiast
Joined
Jun 24, 2009
Posts
1,523
Reaction score
1
Location
Vacaville, California
Wow, nice work. I need to make some time and get by your shop to check these out.

Looks like the perfect set up for anybody with a Comp Coupe and a Gen 4 motor upgrade.

Keep the cool stuff coming,

George
 

VicTxV10

Enthusiast
Joined
Oct 13, 2008
Posts
1,559
Reaction score
0
Location
Victoria, TX
Hey Toddy,

How do these differ from the BBG ACRX headers I have? Is or will the power curve be different?

Thanks,
Murray
 
Joined
Jun 8, 2005
Posts
4,969
Reaction score
0
Location
Omaha NE.
I have seen the developmental process for the headers and the clutches Toddy is producing and the quality of his work is top notch, I will be offering his products here at the shop also when they are up and running.
 

Steve M

Enthusiast
Joined
Dec 29, 2011
Posts
1,069
Reaction score
194
Location
Dayton, OH
Question on the O2 sensor placement - in the first pic, it looks like the O2 **** is on the collector, but in the second pic, it looks like the **** is on the primary. I'm assuming you tested each to see how happy the O2 sensor was about it, but which one will make the cut for final production? Or do you get the option?
 
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Hey Toddy,

How do these differ from the BBG ACRX headers I have? Is or will the power curve be different?

Thanks,
Murray

Murray,

Our new design is a full competition header for those who want to take their engine build to the next level in performance. Our (Your) BBG ACR-X headers are top notch and with 3 years of the SRT Viper Cup Race Series under our belt have proved to be the right choice!

Run them with pride and enjoy your power..

Thanks for your business!

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca. 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:
 
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Question on the O2 sensor placement - in the first pic, it looks like the O2 **** is on the collector, but in the second pic, it looks like the **** is on the primary. I'm assuming you tested each to see how happy the O2 sensor was about it, but which one will make the cut for final production? Or do you get the option?

Steve M,

Glad you took the time to inspect our Proto-type.. Since 6 months of developement has gone into our New Header Program (with many hours of Flow Bench testing utilizing our BBG Viper race cylinder heads, cylinder bore sizes, higher compression ratios, camshafts with higher valve lift & longer durations, broader power bands to maximize performance *7500 plus rpm's and fitment) we thought it necessary to data log several downstream locations of the 02 sensors to truly develope the best header program possible for each custom application from Street to Competition..

Yes "What makes the massive V-10 Happy" specific to application..:usa:

Thanks for your observation.

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca. 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:
 
Last edited:
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Wow, nice work. I need to make some time and get by your shop to check these out.

Looks like the perfect set up for anybody with a Comp Coupe and a Gen 4 motor upgrade.

Keep the cool stuff coming,

George

Stop in anytime George, it's been awhile.. Yes it'll be exciting times this year working with race teams & owner's to enhance their engine programs from mild to wild. With the new G5 Viper about to debut and the G4 conversion kits (mechanical camshafts and JTech controllers) now avalaible, engine builders will now be able to utilize our header program to build the most powerful Viper Engines to hit the tracks..! We have invested the time and the resources to develope what we believe will achieve new standards, our BBG Race Headers..:usa:

See ya soon...

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:
 
Last edited:
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Gentlemen,

Here's a few more photo's of our BBG Race Headers in a Full Race "Super Long Tube" working proto-type configuration.. Custom built to your specific race engine program..:usa:

Thanks and please feel free to contact me directly with questions you may have (916) 505-9026

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca. 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:




 

Steve M

Enthusiast
Joined
Dec 29, 2011
Posts
1,069
Reaction score
194
Location
Dayton, OH
One more question: do you source your collectors from Burns, or are those made in house? Either way, they look top notch, and I really like the v-band connections.
 
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
One more question: do you source your collectors from Burns, or are those made in house? Either way, they look top notch, and I really like the v-band connections.


Steve M,

Hand Fabricated Inhouse, custom built to spec utilizing exact approach radius's to maximize primary length's, accomdate primary size, best collector lengths to relieve pressure while maintaining required back pressure to achieve best scavage characteristics, a true tuned system..! This is why we decided to engineer our Viper Race Headers from a clean slate.:usa:

Thanks for the comparison, but we couldn't afford to hit or miss with a big manufacturer so we stayed inhouse utilizizing our cylinder head knowledge and yes our short but very extensive 3 years of learned header experience.. Giving ourselves total flexibilty to make changes on the fly, expand on learned gains and to be perfeclty frank, not being stunt by guys that know more than us...


BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca,95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:
 

Steve M

Enthusiast
Joined
Dec 29, 2011
Posts
1,069
Reaction score
194
Location
Dayton, OH
Please take my comparison as a compliment to the quality of your work...IMO, Burns makes some really, really nice stuff, so to be mistaken for something that came from them should only be taken as praise.
 
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Wow. These look amazing. Too bad that I only see Gen 5 / Gen 4. I would love to see how these impact my heads/cam Gen III. What's the target peak power RPM for the length headers?

345bspinnin,

How about taking it to the next level, Gen 3 block with a Gen 4 head / intake conversion with high CR, nasty camshaft, ultra light weight triple disc race clutch kit, race prepped TR-6060, race diff's and ooh yeah a set of our BBG "Super Long Tube Race Headers"..:usa: This is the type of engine programs that really spark our interests (750 HP to 1000 HP levels all motor n/a)


BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca 95834
(916) 505-9026
[email protected]

=DISRTIBUTORS OF POWER=:usa:
 
Last edited:
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Please take my comparison as a compliment to the quality of your work...IMO, Burns makes some really, really nice stuff, so to be mistaken for something that came from them should only be taken as praise.


Steve M,

I'm in agreement, Burns is Top Notch and considered probably the best in the Industry.. I've strived for that quality for sure, so thanks for giving our products a serious look over!! Many hours have gone into what your seeing and believe me when I say, wait till you see the finished product, it's a real beast! I'm currently fabricating the first production header as we speak (304 SS)..:2tu:

Again thnx!

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca. 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:
 
Last edited:

JohnnyH

Enthusiast
Joined
Dec 14, 2011
Posts
204
Reaction score
0
Location
New Orleans, LA
345bspinnin,

How about taking it to the next level, Gen 3 block with a Gen 4 head / intake conversion with high CR, nasty camshaft, ultra light weight triple disc race clutch kit, race prepped TR-6060, race diff's and ooh yeah a set of our BBG "Super Long Tube Race Headers"..:usa: This is the type of engine programs that really spark our interests (750 HP to 1000 HP levels all motor n/a)


BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca 95834
(916) 505-9026
[email protected]

=DISRIBUTORS OF POWER=:usa:

Sounds really interesting there.....
 

345s-bspinnin

Enthusiast
Joined
Oct 15, 2009
Posts
657
Reaction score
0
Location
Houston, TX
345bspinnin,

How about taking it to the next level, Gen 3 block with a Gen 4 head / intake conversion with high CR, nasty camshaft, ultra light weight triple disc race clutch, race prepped TR-6060, race diff's and ooh yeah a set of our BBG "Super Long Tube Race Headers"..:usa: This is the type of engine programs that really spark our interests (750 to 1000 HP levels n/a)


BAD BOYZZ GARAGE

Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca 95834
(916) 505-9026
[email protected]

=DISRIBUTORS OF POWER=:usa:

Seriously? I simply wanted to know if you were planning to make a set for Gen III heads. Your response was that I should swap out to Gen IV heads, nasty camshaft, race clutch, trans, and diff? I am sorry that my measly 650+whp Gen III on stock block/clutch/diff is not the type of engine program that sparks your interest.

A simple yes/no would have sufficed. I could also do without your patronizing demeanor. :rolleyes:
 
OP
OP
B

BAD BOYZZ GARAGE

Enthusiast
Joined
Feb 23, 2010
Posts
720
Reaction score
0
Location
Sacramento
Seriously? I simply wanted to know if you were planning to make a set for Gen III heads. Your response was that I should swap out to Gen IV heads, nasty camshaft, race clutch, trans, and diff? I am sorry that my measly 650+whp Gen III on stock block/clutch/diff is not the type of engine program that sparks your interest.

A simple yes/no would have sufficed. I could also do without your patronizing demeanor. :rolleyes:

345s bspinnin,

My appologies, in no way was I talking down Gen 3 power and do not know the extent of your perforamance upgrades.. to the contrary I started my business on a Gen 3 platform. I was just merly talking about some new directions that Viper engine builders are headed and thought you might appreciate it is all.. I'm totally kool with World Challenge GT-3 spec'd Comp Coupes and have built high compression, big cammed G3 street cars also, which produce fantastic hp and trq numbers, all fast Viper's. We currently have solid G3 programs avaliable, so please take no offense and except my appologies if misunderstood or taken out of context.. Yes Gen 3 is on the horizon, but not today.. G5/G4 are first on the fixture.. Again my appologies, I hope we're good and lighten up a bit, I know I get a little mechanical at times too, Viper stuff should be fun, right:2tu:

That being said, I focusued on the newer style cylinder heads for many various reason and again with all due respect these new engine configurations are making serious hp gains.. and truly spark my interest..

BAD BOYZZ GARAGE
Toddy
1337 North Market Blvd. Ste 100
Sacramento, Ca. 95834
(916) 505-9026
[email protected]

=DISTRIBUTORS OF POWER=:usa:




(BBG Gen 3 Head, Intake and Camshaft Package)



(BBG Developement Comp Coupe G3)


(Blue Gen 3 in backroud is mine with approximate 626 RWHP on 91 octane Californai fuel and my son's Gen 2 GTS making about 7 RWHP)


(BBG Gen 3 Comp Coupe Ultra Light Triple Disc Race Clutch & Radius Bearing HRB Kits)
 
Last edited:

Forum statistics

Threads
153,139
Posts
1,681,566
Members
17,640
Latest member
SDViper
Top