Recent content by 2002_red_gts

  1. 2

    My new to me 2000 GTS and Thanks to A&C

    Man that car makes a lot of power but do you think it needs a cam that big. That's a huge duration! How is the tq curve? Does this mean I can get a ride this weekend?
  2. 2

    Any one selling a nitrous kit?

    I've been looking at all the brands and just want to see if someone might have a kit that they don't have a use for
  3. 2

    Nitrous gurus need your advice

    I'm looking to added a small nitrous shot to my h/c viper. I have a few questions. I should be in the 550rwhp+ range and want to add a 100 shot nothing to big. I found a pretty good deal on a dry kit and was wondering if that would be safe for what I'm doing. Also being a h/c car with a stock...
  4. 2

    dropped price on tires and wheels

    I had to let mine go for 1000
  5. 2

    Bigger injectors with heads and cam?

    Do you know the flow rate? Where they increased all at?
  6. 2

    Bigger injectors with heads and cam?

    Well that's what I'm shooting for. Thank you Dan I won't waste any money on them
  7. 2

    Bigger injectors with heads and cam?

    I've search this topic quit a bit but still no solid answer. I'm going Greg good heads and cam build, from what I've read some get away with stock injectors but there about maxed out. I've found that the 300zx side feeds are 370cc and will drop right in. That is a 35lb injector vs a stock...
  8. 2

    2000+ Supercharger Question

    If you can do a TT setup for the same cost then that a no brainer. But for 10k I would find a used s/c setup with a head and cam
  9. 2

    Bent valve?

    I wouldnt worry about that piston at all. If its just a little scratch like you said your good to go
  10. 2

    Bent valve?

    I Bought a set off heads that had a dropped seat. I sent them to be ported and bigger valves so all the seats had to be removed with bigger seats installed. It is from the different expansion rates of the metals. The only real way to fell better about the head is to have the seats replaced or...
  11. 2

    Bent valve?

    Thanks for that dirtysocks!
  12. 2

    Trying to figure out wheel offset. Can you check my math

    Well I’ve ran the number for about an hour to make sure this is right and here is what I have gotten Stock wheel back spacing 18x10 front 2"=50mm offset 18x13 rear 2.5"=63mm offset Now minus the spacer width that people are running to make the stock wheels flush which takes away from...
  13. 2

    Mobil 1 oil filter vs Mopar Viper spec

    What is this part number for this filter? I have always just grab the mopar filter on the self at orileys
  14. 2

    Need A Harmonic balancer and Piston rings

    Yes sir I sent you a PM
  15. 2

    Need A Harmonic balancer and Piston rings

    Well as I get closer to warping up my build I still need a few things.. I broke the harmonic balancer when trying to take it off so I need a replacement. Ill take a stocker or aftermarket just let me know what you have.. im also putting in a set of 98 pistons in her and have the bearing Im just...
See more

Latest posts

Members online

Total: 299 (members: 2, guests: 297)

Forum statistics

Threads
153,181
Posts
1,681,799
Members
17,679
Latest member
Kevsmu4

Share this page

Top