Recent content by DanielR

  1. D

    need help on ordering wheels/tires

    Any wheel company (CCW & Forgeline are two of my favorites) that you "should" be dealing with will have all of the wheel measurements worked out for you already. Just be sure to decide if you will be upgrading your brakes at some point in the future. You don't want to go crazy with a huge lip...
  2. D

    Low Profile Car Jack

    I use the Omega 29023. It's big, heavy, and long, but very low and can get under almost anything. It's not cheap. The place below is where I bought it and usually has the best price, but shipping is expensive...
  3. D

    On my way to work today.

    As bad as everyone thinks that car looks, we have all seen actual owners do much worse to their own vehicles.
  4. D

    Please Photshop this white

    SSG is a metallic color and would end up looking like lime if I tried to change the yellow to SSG. It just would not do SSG justice.
  5. D

    Please Photshop this white

    Quick and dirty. Enjoy.
  6. D

    I finally got my Viper back!

    Nice car and color palette, but I'm biased.
  7. D

    Help! Cand find a video, Tanner Faust Top Gear Viper

    Here you go. The dialog you mentioned occurs between the 2:00 and 3:00 marks. http://vimeo.com/24759701
  8. D

    Is there a way to get the Orange out of the lower rear tail lights? ---

    Red uppers with tinted lowers.
  9. D

    GenII Viper in the 6's Amazing video

    Damn...just damn!
  10. D

    Can't find clutch bleeder.

    These are pictures from Dave6666's old DIY covering fluid changes before the pictures were removed. Hopefully he will not mind me re-posting these. The pictures show the pointed adapter my previous post referred to. I use these parts to vacuum bleed and rarely spill a drop. The key is to only...
  11. D

    Can't find clutch bleeder.

    It has a hole in the end that you can insert a pointed tip into. I use a vacuum, clear line, and pointed adapter in the hole. Just start the vacuum insert the adapter and loosen the bleeder. Go slow at first and keep a close eye on the reservoir.
  12. D

    Can't find clutch bleeder.

    It is right above the hydraulic line. You'll never find it if you're looking for a small bleeder screw. It has a black plastic sleeve almost covering the entire bleeder, but you can still get a small wrench on the end of it to turn it. The whole shaft will turn inside the black plastic sleeve...
  13. D

    Does this sound like a stop cam (vid) ---

    To the OP. If you had a 708 cam and headers it would sound much different. It would sound like mine in the first video below. You can clearly hear the difference between your exhaust and mine. Yours is much more tame partly because of the stock exhaust manifolds, but mostly because of the cam...
  14. D

    GoPro Help

    It's difficult to tell from the youtube video because the file you uploaded appears to be a wmv. This means that the video was converted and compressed not once, but twice. Once going to wmv and twice going to flash/youtube. Each time loses quality. Can you upload the original video file or...
  15. D

    GoPro Help

    Can you elaborate regarding specific quality issues? Is the quality not good or the playback is not smooth? Where was the camera mounted? What settings were you shooting with? I usually use 720p at 60 fps. It gives me a wide field of view and smooth video because of the higher...
See more

Latest posts

Members online

Total: 1,012 (members: 3, guests: 1,009)

Forum statistics

Threads
153,218
Posts
1,682,078
Members
17,715
Latest member
SKY1960

Share this page

Top