Truly masterful work. Congrats, you're an inspiration. Your workspace looked a little tight, must have been an issue at times. Anyway, great work, saved another Viper.
Great post. I've owned my 2005 SRT-10 Mamba convertible (Matilda) for 5 years.
I never worry about gas mileage, it is not good 10 to 14 MPG and I don't care. It's a sports car.
Matilda is extremely reliable and when I've had any issues I use the well written shop manuals and solve the problem...
I think the color is called Imperial Red (Chrysler) or Cardinal Red. Under the steering wheel, remove the panel and there's a couple labels with codes. One of the labels reads Imperial Red and probably has the paint code there. If you figure it out let me know for future reference.
Not sure if you've solved this yet. When you checked the Starter Relay, did you test it charged and uncharged? Also, does the car start when you remove the starter relay and attach a remote start button to 87a in the PDC (Starter relay terminal) and a ground? See my post "2005 won't start after...
Good lessons learned. Be patient, read your manuals carefully, trace continuity and voltage wire by wire and connector by connector, and be methodical. You'll find the electrical problem. These Vipers are super well designed and easy to fix, if you don't rush.
Thanks! Good lessons learned. Be patient, read your manuals carefully, trace continuity and voltage wire by wire and connector by connector, and be methodical. You'll find the electrical problem. These Vipers are super well designed and easy to fix, if you don't rush.
2005 Dodge Viper SRT-10
Previous owner removed TPS sensors from wheels. So, I went into dash to disable TPMS module to see if the Low Tire warning message could be removed. (it could not)
I reassembled everything and when I try to start the car...ignition on, fuel pump on, gauges power up, push...
An update: Still not starting from start button
Bought a new battery to replace the 6/2017 battery, although it was showing 12.6 volts.
Voltage at Start Button connector (yellow wire) is 13.8 volts, is that indicating something???
Fuel light is still lit and displaying below empty although the...
fuel light lit fuel tank has fuel
ignition switch
not starting
solenoid tested at pdc
starter relay tested and works
test procedure for the ignition switch
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.