Recent content by SE7EN

  1. S

    Anyone looking to sell their ROE???

    Its been some months since the last person asked!! Would love to wait for ROE to come out with the new kit, but it doens't sound like that is going to be happening anytime soon. I am looking for a complete ROE kit for a Gen 2. If anyone is looking to sell, please let me know. Thanks
  2. S

    PS steering woes - not ps pulley

    I am going to try the A/M reman pump out of the 5.2l Jeep that crosses with the oe pump. If it works then that is the cheapest solution. If not then ill buy the oem, but its an easy swap to try and save some money is possible. Keep you posted
  3. S

    PS steering woes - not ps pulley

    There are about 29,900 miles on the car, it was involved in a front end accident at one point, but there was no damage to the engine or rack to my knowledge and the previous owner. If the pump doesn't do it then its the rack... Ill take the hour to swap the pumps over swaping the rack. But...
  4. S

    PS steering woes - not ps pulley

    This is gen two car, and I called advanced and got a pump from a 5.2l jeep that from what I researched cross's over, it was CHEAP. Before I swap the pump out and pulley , I can get under car and take off the pressure line off the rack and try the bucket test, 70 psi will be VERY obvious, it...
  5. S

    PS steering woes - not ps pulley

    Well the system bleed out last night and still the same result, so I feel now that the pump internally is damaged, and seems to not be working. I am maybe guessing that the bearing and impeller on the inside of the pump are broken causing the feel of zero p/s. I understand the power assist...
  6. S

    PS steering woes - not ps pulley

    Thanks, I was thinking the same thing I will jack the car up, and let it run and crank the wheel and inspect the fluid for bubbles and or bubbling. Or I will try this method outlined by alldata 1. Raise the front end of the vehicle off the ground enough to allow the front wheels to freely...
  7. S

    PS steering woes - not ps pulley

    What is the proper procedure for bleeding the system then? I can preform this task this evening to check.
  8. S

    Roe Power Steering Pulley Question

    If it is one millimeter it will merely just wear the belt slightly imo (which isnt good obviously). I would guess that each rib is around 1/32 of an inch or so ( i havent measured maybe some one here has ) and that if the run out on the pulley is more the half that distance out (so half the...
  9. S

    PS steering woes - not ps pulley

    Well I have been working on my 2000 RT/10 that I recently purchased. Upon purchase/acquisition the previous owner stated difficulties with the power steering, which I attributed to a cracked pulley from a quick visual inspection (still the oe plastic unit)as the pump made no evident bearing...
  10. S

    Power steering is too tight.

    Any update on your power steering issue? I am having the exact same problem. Pulley seems fine but power steering is almost non existant??
See more

Latest posts

Members online

Total: 1,039 (members: 7, guests: 1,032)

Forum statistics

Threads
153,263
Posts
1,682,506
Members
17,773
Latest member
ctrengine

Share this page

Top