Recent content by viperrt96
-
V
belanger header install on an 02 gts
Be prepared to move/tilt the motor. I've Installed 3 headers on 3 different vipers (Gen1/2) and 2 of the 3 I had to move the motor (level) for clearance (even amount) other than that they're not that bad.- viperrt96
- Post #4
- Forum: RT/10 and GTS Discussions
-
V
Swap the Mufflers?
I would recommend Flowmaster's Hushpower Pro Series Muffler. It's a deeper tone and the inner cone baffle design is much different than the conventional glasspack (perforated) type. It also runs cooler (Side sills seem cooler). I've had magnaflow, randomtech and the last set I took off was...- viperrt96
- Post #3
- Forum: RT/10 and GTS Discussions
-
V
Returning after about 6 years
I have a red viper key blank Not sure what they're going for so shoot me an offer- viperrt96
- Post #6
- Forum: RT/10 and GTS Discussions
-
V
Input requested on E-Bay Motors and Car Auctions
Pictures! Pictures! Pictures! then a detailed description is best. In my experience of selling and buying on Ebay Photos say everything about your auction and you as a seller. I know that sounds too easy but since your potential buyer can't see the car in person you need to be able to make them...- viperrt96
- Post #2
- Forum: General Viper Discussion
-
V
Smog legal Edelbrock Headers
I had Borla's and went to Edelbrock's. IMO the Edelbrock's are a better header but maybe that's because I'm not a fan of stainless headers. Having a V10 the sound is already something one has to get used to. Add stainless headers and they seem to add a higher pitch to the sound. Where I live we...- viperrt96
- Post #3
- Forum: RT/10 and GTS Discussions
-
V
POST PICS of your TRUNK!! Need some ideas...
hard to tell by this pic but my bottles sit on a custom carpeted insert and the rest is fully functional- viperrt96
- Post #2
- Forum: RT/10 and GTS Discussions
-
V
First Time Viper Owner- Hennessey 500
Look at your ECM (Passenger side) he typically stickered it like this My car is not a Hennessey but at the time (1998) he was the only tuner I could find that could flash a JTEC- viperrt96
- Post #28
- Forum: RT/10 and GTS Discussions
-
V
Gen 2 Viper does a 168 mph pass with Vipair coilovers!
:omg: 134mph in the 1/8th impressive !- viperrt96
- Post #2
- Forum: RT/10 and GTS Discussions
-
V
I need a set of Forgelines like these - 18x10
PM me a price ? Would you also consider these in on trade ? A local owner had these for drag racing and only used them a few times. They have no curb (lip) damage at all and the paint is brilliant - currently have BF Drag radials on them but I would consider them old and useless- viperrt96
- Post #4
- Forum: RT/10 and GTS Discussions
-
V
I need a set of Forgelines like these - 18x10
Looking for a set of Forgelines so I can complete a set for my car. These are the rears so I need the fronts (18x10) If you have a set that need refurbed that's ok too. I'm powder coating the centers anyway so anyone ? Thanks- viperrt96
- Thread
- Replies: 5
- Forum: RT/10 and GTS Discussions
-
V
Need new 3" Mufflers on my Random Technolog Exhaust- What's the best sound out there?
Re: Need new 3" Mufflers on my Random Technolog Exhaust- What's the best sound out th Forgot to mention it has to be stainless as well- viperrt96
- Post #2
- Forum: RT/10 and GTS Discussions
-
V
Need new 3" Mufflers on my Random Technolog Exhaust- What's the best sound out there?
Yes I know there's the "Official Exhaust Clip" thread but after looking at 12 pages I'm no further along in my decision making than before http://forums.viperclub.org/threads/622540-Official-Exhaust-Clip-Thread!!!?highlight=exhaust+clips Here's what I have Modded 96RT10 - 490/520 @ wheels...- viperrt96
- Thread
- Replies: 2
- Forum: RT/10 and GTS Discussions
-
V
Gen II Diff Prefer one with 3.33
Looking for a diff that already has a set of gears (prefer 3.33) I want to swap to a set of gears but keep my diff in case i don't like it I only need the diff but would take a whole rear end if that's what it takes to buy it Thanks- viperrt96
- Thread
- Replies: 0
- Forum: What'cha Need for Your Snake?
-
V
New u-joints, or bite the bullet and buy unitrax half shafts.
Spicer is Dana and Vipers have Dana 44 IRS's so spicers are what you need and if I remember that's what came with the Unitrax half shafts too so........- viperrt96
- Post #14
- Forum: RT/10 and GTS Discussions
-
V
New u-joints, or bite the bullet and buy unitrax half shafts.
Always buy new straps and bolts Buy the Unitrax just for the fact that they are tough I know I broke their best (1000hp) half shaft :smirk: Unitrax made good on it (call it a fluke ?) and I don't know what they did but I've yet to break another one Given that these cars are heavy (3800+) and...- viperrt96
- Post #13
- Forum: RT/10 and GTS Discussions
