Just sent the Injectors off to Tony Armour. Thanks for all the replies in a few weeks will let you know the outcome. Ellow thanks for the tip on cycling the
Injectors.
Pulled the Roe blower last night ,going to send the Injectors off and have them checked and R&R d. While the blower is off
Tim ( Bottelfed ) Had a extra coil pack and going to put that on . Anybody Know of who is good on the Injectors . While everything is apart
going to check all connections...
Grounded the spark plug to the engine hooked up too number 2 wire and I have great spark. Took the car around the block
and still runs bad. I put a new Vec on reloaded the card and still runs like crap. Tim or Bottelfed was with me.
EllowViper will look at the injector and trie that as well.
You should be able to find the break. Cut the wire and put some heat shrink on solder the wire . Just take your time
and sort thru the wires. They are usually broke right at where the harness is exposed.
I have been having some issues with my 2002 GTS Roe supercharged Viper. Right now the code is a ( po 302 cylinder 2 misfire ) I just bought
new wires from ABs wires , Changed plugs I even changed the computer . The only thing I haven't done is the coil packs . Is there anything
else I should...
I have a Red and white striped 97 GTS that I was wondering if anybody is in the
trading mood . Prices are down and and maybe it would be more fun to trade but I have 2 red and white GTS and only need one. I would be interested in a 2000 RT10 black and Tan interior .
My 97 GTS has 15000 miles...
Well we think we found the problem . Bottelfed came over and he noticed the the first green light
on the VEC was not on when the ignition was left on. We moved the power wire under the dash and the green light would come on and off. Wire looked good but apparently was not so we replaced the...
Recap
Last Sunday I put my Viper together . I was doing some work over the winter
on the Viper. I had a Valve keeper pop out and dropped a valve last November.I removed the Roe blower and the passenger head. bent Valve. I had a new guide and both Intake and exhaust valves replaced and new...
Right now we are looking at the alarm system. I have a after market alarm. The alarm system was installed before I bought the viper. The alarm system is a Clifford . Trying to figure out how to reset it.
Then will look at the crank sensor.Thanks for the inputs
When I first fired it up I brought it up to temp and I had a hose clamp that was not doing its job
and it spayed about a quart of anti freeze in between the frame and headers. Is there any thing I should check. At the time the viper was still jacked up in the air I got under the car and wiped...
Plum crazy
When I was putting it back together I had a leak on the back heater hose.
Gauges were all fine except the tack was at 0.The motor just went dead.
I have a 2002 FE with a roe blower . I had just done some work to my Viper
and was my first outing this year. Changed the oil . plugs updated my Vec 2
I started my Viper up and it roared to life . Everything sounded perfect Time for a test drive. Drove over to a friends house around 15 miles...
Ted
I have Belanger headers with a Roe supercharger what are the pickles you are talking about. Also where are they located in the headers. I just happen to have my headers off.
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.