Search results

  1. D

    Got my reflashed controller back from DC Performance

    Thanks for the feedback everyone. First I would like to let you know that we have done several hundred calibrations for the SRT Viper. We have tested these programs on the dyno, on customers cars and at the track. HP and toque increases vary from car to car and we cannot control all the...
  2. D

    DC Parts Friday Flashes-3/23/2007-Part 2

    <font color="red">Solid Steering Rack Mounts 1995-06 Viper</font> These mounts improve handling and steering response dramatically. A must for cars that often see the track. They are a direct replacement for rubber isolator mounts found in production Vipers. Constructed of lightweight...
  3. D

    DC Parts Friday Flashes-3/23/2007

    <font color="red">170 Degree Race Thermostat 1992-2006 Viper</font> This direct replacement 170-degree thermostat offers an early opening rate and improved flow. Help your engine run cooler under track conditions. Fits all models 1992-2006. Unlike cheaper aftermarket thermostats ours are...
  4. D

    Chromoly Flywheel

    No I have not had any flywheel failures. The reason I changed to the chromoly flywheels is because of the problems I encountered with the aluminum type. Aluminum wheels seemed to work well, but under hard use I encountered some occansional problems. 1. Ring gears that would loosen up from the...
  5. D

    Chromoly Flywheel

    I have not seen any issues with starter motor teeth and chromoly flywheels. I think the problem you are refering to is limited to very light flywheels that have thinner ring gear teeth and load the starter gear. Our flywheels are lighter but not nearly as light as the ones you are refering to...
  6. D

    Take off Parts Special

    I have the head pipes shown in your picture. I have several rebuildable transmissions and a few good used. Call me and I can let you know exactly what we have.
  7. D

    1000 hp twin turbo Vipers

    If you are traction limited at those speeds then you may have an issue with the driveline or tires. A check of your tires, air pressure, shocks and limited slip differential could show the problem. More power will not help if you do not improve traction. Here are some changes that will make a...
  8. D

    Broken door spring

    This can be a problem as the Viper ages. You need to lubricate the hinge every couple years. The alumunim hinge wears easily also, so if not lubed your door will drop as it wears and hit the weatherstrip.
  9. D

    ***just Converted My Convert To A Coupe***

    I hope I can add some support to this thread. I met with Steve (the owner of this company) to review the work we were finishing on his Competition Coupe and GTS Viper the other day. I will admit that I have not seen his finished product on this conversion, but I can tell you that he is for real...
  10. D

    Take off Parts Special

    We have a large inventory of take off parts in stock, here are a few: Harmonic Balancers GEN 1-3 $50ea Gen 2 Heads (good used) $600 set Gen 3 airboxes (complete) $75ea Gen 2 Transmissions (need rebuild) $250ea Gen 3 Transmissions (need rebuild) $250ea Gen 3...
  11. D

    Service Engine Soon code 1494

    Leak detection switch faults were very common on the 1998 and 1999 models. The pump switch was prone to failure and is part of the pump. The purpose of the pump is to pressurize the fuel tank to check for evaporative leaks (for fumes getting into the atmosphere and polluting the air). Your...
  12. D

    DC Performance Friday Flashes-3/9/07 part 2

    <font color="red">Front Fascia Protection Screen</font> <font color="red">1992-2002 Viper GTS/RT/10</font> We have seen engines ruined by loss of oil due to an oil cooler damaged by rocks or race track debris. These screens are 100% stainless steel with a tig welded boarder (no chicken wire...
  13. D

    DC Performance Friday Flashes-3/9/07

    <font color="red">DC Performance</font> <font color="red">PERFORMANCE COMPUTER CALIBRATIONS</font> DC Performance is one of the few companies that offer Viper performance computer upgrades. We thoroughly test all of our products and computer upgrades on our Dynojet model 224 chassis dyno. This...
  14. D

    Dead Pedal

    Thanks for the feedback. The dead pedal is adjustable so you can position it where you want. I have really large feet and am always having problems hitting the wrong pedal unless I am wearing the right shoes. On Gen 1 Cars, if your clutch pedal bushings are worn you could get close to the dead...
  15. D

    Performance Transmission Crossmember and Mount

    When using a more rigid engine mount on the Gen 3 engines the torque load or twisting effect during a drag race type start pulls on the side of the block and can distort the cylinder that is next to the mount. We have seen this during engine teardowns, finding that one cylinder out of round. On...
  16. D

    Toe Box Assembly

    <font color="red">NEW PRODUCT RELEASE</font> <font color="red">1992-1996 RT/10 TOE BOX ASSEMBLY</font> The clutch pedal bushings for the early RT/10’s have always been a problem.  The plastic bushings wear; the clutch pedal gets loose and flops around. The car is hard to start without pushing...
  17. D

    Dead Pedal

    <font color="red"></font> 1992-2002 VIPER</font> DC Parts has released another Race Track Generated Product (RT/GP). The lack of a “Dead Pedal” has been an ongoing complaint about the Viper since its inception. With the long footwell tunnel there just isn’t anywhere to put your left foot...
  18. D

    Edelbrock Headers?

    I worked directly with Edelbrock on these headers years ago. We did all the testing on a rear wheel dyno and an engine dyno. Hp gains were about 20hp peak with the stock exhaust on the production engine. SVS, Caldwell and Bellanger headers all made more peak power (but not smog legal). What was...
  19. D

    Chromoly Flywheel

    There are major differences between the Pro-Lite flywheel and ours. For those of you who have tried this flywheel you may have noticed that the clutch cover bolts are not tapped through and the back of the wheel does not include the champher to mount flush on the 01-02 models. Ours includes all...
  20. D

    Chromoly Flywheel

    We have Gen 3 flywheels in development currently. I will let everyone know when they are released.
  21. D

    Performance Transmission Crossmember and Mount

    Yes, I do have Poly Engine mounts available. On Gen 1 and 2 I recommend changing both. On Gen 3 we just change one as doing both will distort the block. Dan
  22. D

    Quick-Fire O2 Sensors

    Our O2 Sensors offer improved sampling rate and quicker operation when cold. As a direct replacement these sensors are far superior to the Mopar Units. <u><font color="red">Here are some advantages</font></u> 1. No "Check Engine Lights" associated with aftermarket headers 2. Longer lead...
  23. D

    Side Sill Vents

    1992-2002 Viper GTS &amp; RT10 Over the years we have battled side sill heat issues in the Dodge Viper. The exhaust system is encapsulated and creates a tremendous amount of heat. The effect is extreme cabin heat around your feet, side panels that are too hot too touch and discolored paint...
  24. D

    Performance Transmission Crossmember and Mount

    Over the years, I have seen many issues related to driveline flex on the Dodge Viper. Broken engine and transmission mounts, problems related to chassis flex and hard shifting under power. DC Parts has just tested, qualified and released a new transmission crossmember and mount. I recommend...
  25. D

    Chromoly Flywheel

    New Product Release! Dodge Viper 92-02 "Light Weight Chromoly Flywheel" <font color="red">Advantages to a Light Weight Flywheel</font> 1. Improved throttle response and acceleration 2. Improved shifting under power 3. Improved heat dissipation 4. More durable than aluminum flywheels 5. 10.5...

Latest posts

Members online

Total: 614 (members: 1, guests: 613)

Forum statistics

Threads
153,199
Posts
1,681,913
Members
17,696
Latest member
Viper123456

Share this page

Top