Search results

  1. AAKVIPER

    Some Gen 1 fuel pump shop manual helpful diagrams

    I hope this helps some Gen 1 guys!
  2. AAKVIPER

    What RPM does your Viper idle?

    My 1994 Gen 1 has been at this idle area since I first owned it!
  3. AAKVIPER

    Gen 1 need help on radiator hose kit help

    Gen 1 need help on finding a radiator hose kit ! Any sources for a 1994 radiator hose kit? All are for Gen 2 Vipers !
  4. AAKVIPER

    Members found fuel pump relay for my 1994 read on

    The relay looks like this from my research! Any Any part numbers would be awesome.
  5. AAKVIPER

    Why do most early Vipers have flaps on side of the fan shroud?

    Can we take the flaps off each side for better air flow? What purpose to they have?
  6. AAKVIPER

    What is the 1 gen rt 10 rev limiter RPM set at?

    What is the rev limiter on a Gen 1 RT 10 set at? 6,000 or 6,200 RPM. Is it a fuel or ignition or both cut off? Thanks, Arthur
  7. AAKVIPER

    Some pics and a question about head gaskets on a Gen 1 ..

    I had my head gaskets done two year ago and so far no problems. But I have a craze question. The area in the pictures were the bottom part of the head meets the block is only a water galley right? I added red arrows to the area in question. So no oil can ever seep put of these areas right...
  8. AAKVIPER

    K&N filter question..

    Back in 1999 I added smooth intake hoses and K&N filters..The question is, on a 9 K mile car should I clean or replace the K&N filters? Would the dust from just sitting all these years settle on then even with the hood down and affect air flow? The car is garage kept. I have never cleaned the...
  9. AAKVIPER

    Gen 1 and Gen 2 owners ever got tired of the dirty sift bezel? pics

    http://sphotos-b.ak.fbcdn.net/hphotos-ak-prn1/947044_502306569825031_1843592035_n.jpg Just got it from my dealer..I added the part number in the pic.. The replacement bezel is all in black..better then that fuzz gray..Cheers Arthur...
  10. AAKVIPER

    has anyone ever hit the rev limiter on his Gen 1 Viper?

    If so what does one expect...does fuel or timing cut off..? I am not even sure at what RPM does the limiter start to work? Thanks Arthur
  11. AAKVIPER

    Probably not anything to worry about..but ever since new on 1994 RT-10..

    I have had to turn the key about two more seconds then I would like too to start the motor. I notice this when the 1994 Viper was sitting for a few days. It starts right away but I feel that I am turning the key and holding it a little longer then usual. When my gen 1 RT-10 is hot and I park...
  12. AAKVIPER

    I added nitrogen filled instead of regular air on all of the PS2's on my 1994 RT10..

    I had all my tires purged and refilled with nitrogen on my RT-10 last week. To be honest the 15 bucks per tire to get the process done was not worth the benefit in my opinion. I still gained 3-4 pounds on each tire after a hard run and the car still handled the same. MPG was also the same as...
  13. AAKVIPER

    check put this Viper tube...

    http://www.youtube.com/watch?v=CC5IzzzFErU&feature=related
  14. AAKVIPER

    shift knob question?

    Are all the stock shift knob tread sizes the same from 1992-2010. In other words, do all shift nobs fit on any Viper? Arthur
  15. AAKVIPER

    Does anyone have an idea where to find a Gen 1 rubber shifter boot..??

    I have tear on mine..Viper dealer parts does not have them anymore. Arthur
  16. AAKVIPER

    Help please..Gen I dash board gray paint part number

    I can not find anything in the serach area.
  17. AAKVIPER

    A picture of my RT-10 with the new AB spark plug wires

    The picture with the AB wires is deceiving, but no two wires are ever crossed or touching. Each wire has 1/4 min of distance between them. Now the OEM wires my look more organized on the wire holders or separators, but beyond the picture was a spaghetti mess towards and aft of the coil packs...
  18. AAKVIPER

    Jay Leno's Garage vid oin the 2013 SRT VIPER beside our beloved RT-10 and GTS

    Jay Leno's Garage vid on the 2013 SRT VIPER beside our beloved RT-10 and GTS Very cool video tube, enjoy Arthur http://www.jaylenosgarage.com/video/2013-srt-viper-gts/1408162
  19. AAKVIPER

    AB spark plug wires are worth every dollar..A few images are worth 1000 words..

    As I replaced my stock one year old Viper RT-10 spark plug wires, I conducted an experiment on each old wire with the respective new wire. I acquired an ohm reading of each old wire and compared the results to the new wire. The AB wire is the red thermal coating ones, while the stock one...
  20. AAKVIPER

    Ordered AB spark plugs today for my 1994 RT-10

    Red spark plug wires with heat wrapping all around. I am replacing Magnecor R-100 Racing (10mm) Wires which I owned for years now. I had a chat with Adam and he converted me. I decided not to replace the coil packs..with 9K on the OD..let them alone was my call after the awesome members on...
  21. AAKVIPER

    Anyone have the drag coefficient #'s of 1994 Dodge Viper?

    With the hard top and plastic side windows on. I read a long time ago it was a sucky .45 and the GTS was a very Vette like .35.. Arthur
  22. AAKVIPER

    Members, serious question on Gen 1 Coil packs, do I genuinely need aftermarket ones?

    Coil pic http://sphotos.xx.fbcdn.net/hphotos-prn1/c67.0.403.403/p403x403/541886_379839818738374_1569934967_n.jpg My normally aspirated stock cam and heads 1994 RT-10 has 9 K on the odometer, with new spark plugs and wires. I have been reading past forum posts about what a colossal pain...
  23. AAKVIPER

    Top Gear's Clarkson actually liked the Viper at one time...what happened later?

    Arthur A look see into the past like the Viper tubes http://www.youtube.com/watch?v=tMp_o9-0I_g&feature=related http://www.youtube.com/watch?v=aeEBrOx12uQ
  24. AAKVIPER

    Had the Viper in for alignment yesterday

    The car has never had an alignment since new..And the past couple of years the RT- 10 felt very vague in the handling department. I had a hard time finding an alignment shop in central New Jersey that accommodates the low front end of my Viper. I found on RT-9 north bound near Freehold a...
  25. AAKVIPER

    On a 1994 RT-10..besides just repalcing a K+N filter, smooth tubes in stock housing.

    any ideas for better intake flow besides the aforementioned? Cone type filters maybe? Any pics as well? Arthur

Latest posts

Members online

Total: 517 (members: 2, guests: 515)

Forum statistics

Threads
153,191
Posts
1,681,858
Members
17,686
Latest member
Javadog62

Share this page

Top