Search results

  1. Z

    blown motor - what do I do now?

    What's the lasted update. Got the Viper running with the new engine? Got the Roe on? :eater:
  2. Z

    Build you own GTS

    I was out with my FE the other day and a guy asked me if it was real or a kit car. I thought he was crazy. What do you know.:rolaugh: What a piece.
  3. Z

    Found a viper but im not sure if its right for me.

    I see the problem. Someone stole 6th gear. It's posted as only a 5 speed.:)Other than that, looks like a steal. Remember how the old saying goes, if it looks like it's to good to be true? Good luck
  4. Z

    Pissed friend off

    One of my best friends decides to buy a new Z06. Beautiful black car. I think he was out the door for a little over $70. It drove nice and it out ran my FE. I didn't like the paint job on the Vette. To much orange peel. Any ways, we both took them to the little Sat. night car show and parked...
  5. Z

    Sold

    That's the good thing about the Phoenix area. No down time to sell a Viper here, unless it doesn't have AC. Then forget selling it anytime. Glad it went to a good home. You'll be back.:)
  6. Z

    Some help on a fair price for a 2000 GTS w/HRE's

    $45K is a steal for any low mileage GTS. Ask $50k and go down from there if you need to.
  7. Z

    1997 B\W sold on Ebay- Good Price

    The collector car magizines are saying the Viper, especially the 96-02 GTS is the next true american collector car and will do nothing but start going up in price. That being said, the next guy that gives his Viper away, neededs to be flogged in public. At least on the forum and then banned for...
  8. Z

    Buyer Beware R&J Distributing

    I got my chrome emblems in less than a week. No problems here. Hope things work out for you.
  9. Z

    Stock Manifolds +Roe Supercharger?

    That's the way I'm going to go. At least for awhile. I'm going to use the header money for a alum radiator and dual fan. Tired of the GTS running 210 degrees all the time. Can't wait to get the Roe. Been saving for months. Almost there. :)
  10. Z

    3.42 Or 3.73 Gears

    Just installed 3.55's in my GTS. I don't care what everyone says, it really woke it up. Love them. Dave P
  11. Z

    ACR wheel caps

    Hi Guys I have a set of BBS wheels on my GTS which look just like the ACR wheels but with the bolts in them, The centers say BBS. Does anyone know where I can get the Viper caps? Thanks Dave
  12. Z

    Pulling the front bumper cover.

    We didn't even have to remove the hood. Actually we left it on to line up the headlights better. The whole front looked like it was just thrown on there. Checked for any damage but didn't find anything. Can't believe they were able to sell it that way, but everything looked factory. Maybe just...
  13. Z

    Pulling the front bumper cover.

    Thanks Dave. I posting at the same time you are. Sorry to look like I'm not reading the posts. You guys are so good to me, you have all my guestions anwsered before I can ask them.:rolaugh: Dave P.
  14. Z

    Pulling the front bumper cover.

    Thanks for the clip link. Now I'll measure them and that should help.:)
  15. Z

    Pulling the front bumper cover.

    All done. Has to be some kind of record. My son-in-law had it off and the headlights adjusted in less than an hour. He even puled off the figerglass bumper part. Everything needed re-alignment. Once he gets focused and into the job, there's no stopping him. Good kid. He even did it with all hand...
  16. Z

    Pulling the front bumper cover.

    Guys You are awesome. What a lot of info. Thanks a bunch, We are pulling it now. Let you know how it goes. Dave
  17. Z

    Pulling the front bumper cover.

    I'm getting ready to pull the bumper cover and repaint some rock chips and scraps underneath. Going to paint stripes on it too when done. Just wondering if anyone has any tricks to getting it off and putting it back on. Is it hard to do? Need to line things up a little better also. Thanks Dave
  18. Z

    Fuel Pressure Fix without buying whole module

    I had this same problem and purchased the fuel pump extender from Tom and have not looked back. It makes the pump run for 12 seconds instead of a couple. I need to adjust it so it runs for about 20 seconds and it would be perfect. I just cycle it twice. Tom said I could do this but I haven't got...
  19. Z

    Hard Brakes finally fixed

    When I get my camera back in a couple of days I'll post some pictures. There was a valve of some kind with some O-rings on it that came out of the front of the P-valve similar to what came out of the rear only longer. There's a elec switch on top of the valve that we had to take off and plug...
  20. Z

    Hard Brakes finally fixed

    After replacing all the pads,installing cross cut and drilled rotors, up-grading to Tom's bigger rear calibers and installing a nice used booster and master cyl. I still had the hard brake pedal problem and hardly any braking, slowing down hard from a quick pull. It just didn't have any brake...
  21. Z

    Cooling fan upgrade

    That's why I always ask before I buy. There are some good deals out there and of course stuff not worth wiping yourself with. Thanks Dave
  22. Z

    Cooling fan upgrade

    I already did the hoses. I saw a alum. radiator on ebay for $449 item #110172151286. It looks pretty nice. Says made in USA by ET corp. Almost $200 cheaper than anything else I've seen. Anybody useing one of these? If I bought this, it's like getting a free fan. Thanks Dave
  23. Z

    Cooling fan upgrade

    Everything I read, says to upgrade the cooling fan on my 97 to a 99 - 02 cooling fan. Is this a direct bolt in? Where is the best place to buy one? Anyone have a used one for sale? Thanks Dave
  24. Z

    Quick Connect Firring Help!!!

    I had the same promblem and same tool you are using. I ground off part of the plastic tool so it would fit between the filter and hose. Cut about half of it off and it worked. It was only $5 so I figured if it didn't do the trick I was only out $5. Believe or not, it worked like a champ. Just...
  25. Z

    3.55's to be installed

    $875 for labor and gears.

Latest posts

Members online

Total: 296 (members: 11, guests: 285)

Forum statistics

Threads
153,249
Posts
1,682,354
Members
17,743
Latest member
bigCC

Share this page

Top