Hello,
I want to fit a new crankshaft seal. There are two different brands: the one from National = 710698 and the one from Mopar = 5037300AA. Rockauto offers both. Do you know if there is a real quality difference or maybe National is the manufacturer and sells it to Mopar?
Thank you and best...
Hello,
I need to know the capacity of the R134a AC gas in a 3rd gen. Viper SRT10 from 2004.
I know that the service manual only states "Refer to the A/C Underhood Specification Label located in the engine compartment", but my Viper has a 2008 hood and I cannot check the label on my original...
Hello,
I have a 2004 Viper SRT10 with stock Tremec T56, but with a lot of other modifications like Paxton etc..
Dodge is now here in Spain represented by Fiat and I asked them about the transmission oil and they told me ATF4. But my owner's manual says that I should use a synthetic 75W-85 oil...
Hello,
I have searched this information before in the parts catalogue, but I get no exact information. Does my 2004 Viper need for the front + rear suspension in total 4 x lower ball joint seal part number 52006404 and 4 x upper ball joint seal part number 52006405?
Thank you and best regards...
Hello,
what do you think about the Rim Ringz:
https://www.youtube.com/watch?v=8rHY_Vt2FLA
I would like to try to fit them to see if I like the look, but will they damage the tire?
Does anyone of you know these Rim Ringz?
Thank you and best regards from Valencia
Carlos
Hello,
concerning the front wheel bearing hub 04763182AB there are extreme price diffferences between the original part or for example OPTIMAL 991672.
See:
http://www.autorecambiosstore.es/optimal/juego-de-cojinete-de-rueda-7583422...
Hello,
please show me a pic of the bulb for the volt meter gauge. I have seen in the manual that all 4 gauges should use bulb 103, but how does bulb 103 look like? Google images shows so many different bulbs that I am totally confused....
Thank you
Regards from sunny Valencia (Spain)...
Hello from Valencia, Spain,
I need for my 2004 Viper SRT10 a DRBIII diagstostic tool like Dodge dealers in USA use.
But here in Spain since Dodge belongs to FIAT the oficial Fiat dealers do NOT have the DRBIII = impossible to get here!!!
I am having problems with my PCM or maybe BCM and need...
Hello,
who has installed a battery disconnecting switch that can be activated from the outside like the attached pic?
Or maybe better in front of the car under or near the hood release?
Pics please!!!
Thank you and best regards from Valencia, Spain
Carlos
Hello,
I am searching for mt SRT10 Convertible side emblems with the Word "supercharged", "supercharger" or "Paxton".
Do you have any idea of where I could order them - no problem if in the USA.
Please add a picture if you already have similar side emblems fitted to your car.
Thank...
Hello,
I have activated in my 2004 Viper SRT10 the battery save option by doing exactly what the manual describes. But after 45 seconds you still can open the driver's door if you want = not good at all if your car is together with more cars where more people have access to the garage. I need...
Hello,
I need to know the outside diameter of the Corsa in comparison with Borla for a SRT10 GEN III. I do NOT mean the 2.5" or 3" connector pipes, I mean the diameter of the exhaust itself.
Thank you and best regards from Valencia (Spain)
Carlos
Hello,
I need to know urgently if the attached pic is really the DLM tensioner for Paxton for a SRT10 Viper. I mean $250.00 for this little part? No more parts like pulley or other parts are inlucluded????
I hope you can answer me, because I am lost of words...
Thank you and best...
Hello,
who knows where I can get the original Viper GEN IV ACR B-pillar label tire pressure where front tire size is 295/30 R18. I need TWO of them.
I hope you can help me - it's important for car inspection reasons here in Spain.
Thank you and best regards from Valencia
Carlos
Hello,
I live in Valencia, Spain and I have bought a Paxton kit for my Viper SRT10 from april 2004 with VIN: 1B3JZ65ZX4V100816. My car has the following mods:
American Racing headers, high flow catalytic converters (2 of them instead of the stock 4 ones), cooler thermostat and a Borla...
Hello,
I will fit a Paxton + 2008 hood to my black 2004 Viper SRT Convertible.
Now I have TWO silver vinyl stripes, but I am ging to paint the stripes, because I will also fit the Coupé tail light (3rd brake light) and other modifications.
Now I just want you to post pics and/or tell me...
Hello again,
I have raed again the manual of my 2004 Viper SRT10 and it says:
As soon as you turn your key to the ON position, you
will see your MIL symbol come on as part of a normal
bulb check. Approximately 15 seconds later, one of two things will
happen:
a. The MIL will flash for about 10...
Hello,
I have again tried to understand the coolant level check procedure for my 2004 Viper SRT10, but I still have some questions:
The service manual says, that with the engine COLD, the coolant level in the coolant pressure bottle should be in the COLD FILL RANGE (see attached pic). Then I...
Hello,
I would like to fit the rear fang third brake light from the Coupé to the Convertible, because I hate the long horizontal type third brake light.
Who did this before and can tell me details?
Where can I buy the fang brake light?
I also would like to move the european rear fog lights from...
Hello
I caould buy 2 totally new half shafts for my Viper SRT10 from 2005. Part number 05038200AA. One is built together like when you order them from Dodge. The other one is disassembled. The shaft is in the white box and the sferes, too My question is: Is it possible or easy to fix the...
Hello,
I live in Valencia, Spain and would like to buy a Paxton kit for my 2005 Viper SRT10. I have ssen the paxton website and now my question is, where I can buy it in polished finish getting a good price including shipping to 46001 Valencia, Spain.
Whay is the diference between the part...
Hello,
here is my 2005 Viper with some modifications like KW suspension, Forgeline wheels, Borla + B%B headers + race-cats and much more things.
I love the beast!!!
Regards from Valencia, Spain
Carlos
Hello,
I know that the exhaust tip moving caused by the immense heat is normal, but on my 2004 SRT10 Viper with B&B headers, race cats and Borla exhaust, the left exhaust tip moves more than the right one. My mechanic installed the tips so that when the get hot there is enoogh space for them...
Hello from Spain,
during my last technical inspection here in Valencia, Spain, a big specification mistake was discovered on my 2004 Dodge Viper SRT10, VIN 4V100816:
front track is 61.6" and not 57.8" like the official document tells. rear track is always and everywhere correct.
I have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.