Search results

  1. 2

    Any one selling a nitrous kit?

    I've been looking at all the brands and just want to see if someone might have a kit that they don't have a use for
  2. 2

    Nitrous gurus need your advice

    I'm looking to added a small nitrous shot to my h/c viper. I have a few questions. I should be in the 550rwhp+ range and want to add a 100 shot nothing to big. I found a pretty good deal on a dry kit and was wondering if that would be safe for what I'm doing. Also being a h/c car with a stock...
  3. 2

    Bigger injectors with heads and cam?

    I've search this topic quit a bit but still no solid answer. I'm going Greg good heads and cam build, from what I've read some get away with stock injectors but there about maxed out. I've found that the 300zx side feeds are 370cc and will drop right in. That is a 35lb injector vs a stock...
  4. 2

    Trying to figure out wheel offset. Can you check my math

    Well I’ve ran the number for about an hour to make sure this is right and here is what I have gotten Stock wheel back spacing 18x10 front 2"=50mm offset 18x13 rear 2.5"=63mm offset Now minus the spacer width that people are running to make the stock wheels flush which takes away from...
  5. 2

    Need A Harmonic balancer and Piston rings

    Well as I get closer to warping up my build I still need a few things.. I broke the harmonic balancer when trying to take it off so I need a replacement. Ill take a stocker or aftermarket just let me know what you have.. im also putting in a set of 98 pistons in her and have the bearing Im just...
  6. 2

    Swapping pistons do I need to balance my rotating assembly?

    Well I decided why my heads where off to try and put in some OEM 96-99 forged rods and pistons. I drawl the line at dropping the tranny and the crank to get everything balanced. I was hopping that the weight of the 02 pistons would be close enough with the 99 that I could get away with it.. Any...
  7. 2

    Big thanks to Tator's Garage

    I want to thank Tator for a big help putting together all the gaskets I need for my head and cam swap and giving me a super deal on them!! Thanks again!
  8. 2

    Need help with my budget head and cam build

    This has been about 12 months in the making. I've been slowly taking my time and searching for good used part to put together my build. I'm in the military and have a wife so I can't drop 5 grand at once with all the bells and whistles lol. Anyways Mr. Good said my heads would be done soon so...
  9. 2

    What is a set of heads worth?

    I was thinks off selling my stock arrow rebuild heads off my 02 gts to finance the rest off my head and cam swap. How much is a set of heads with about 2500 miles on them worth?
  10. 2

    Look at this Intake Manifold

    Check out this crazy 4 TB's and 20 injector intake. I wonder why he made this? I didn’t think our manifolds are that restrictive. http://www.youtube.com/watch?v=X3xlb4VHsBg&feature=relmfu
  11. 2

    Fast bleed vs slow bleed lifters

    I'm saving up and collecting parts for my buget head and cam swap on my 02 viper. I have been doing research on parts I need to replace while I'm in there. My question is with a 02 I have fast bleed lifters should I chance to slow bleed? Is it something that has to be done? Like I said I'm on...
  12. 2

    Need help with compression ratio.

    I'm trying to figure out what my compression is going to be and if I need to mill my heads. I would like 10.5:1 to 11.0:1 for my n/a build. I just had my heads CC'ed at 74cc and I plan in running a gen IV head gaskets that I believe are .027 thickness (correct me if I'm wrong) I ran the...
  13. 2

    How much cfm out of a valve job?

    Just got off the phone with Mr. Killians (head ported) he flowed my heads today and got 280 at .600" but said the the valves need a valve job bad and where leaking. He stated that I could see 3% up to 10% in flow from a could valve job. I was hoping for 290cfm do you think a valve job will get...
  14. 2

    Need help wiring ROE fan control unit.

    I received a roe fan control from another member. It appears that it's the upgrade kit. Which does don't come with the relay and fuse like the full kit. Does anyone have any idea if I can make this work with or with out the relay. If I can run to radio shack and get a what ever amp relay and...
  15. 2

    Stock SRT10 Rocker Ratio

    What is the stock ratio of the gen 3 (03 and up) Rocker ratio? Ive been told they where 1.73 but ive been doing some research and getting mixed answers saying there 1.7? Does anyone have the answer? I no its not to much of a difference but with my cam that extra .03 puts it right at .600' lift
  16. 2

    Does anyone have a set roller rockers laying around?

    Does anyone have a set stock rockers laying around? I'm putting together a buget head and cam swap on my gen 2 and I wanted to know if anyone has a set of stock gen 3 rockers that there willing to part with? I would really apperciate it
  17. 2

    Best machine shop in socal

    I'm looking for a machine shop here in San Diego to do a vavle job milling and assembly my heads. Does anyone have a recommendations on a good shop.
  18. 2

    Strange "clunk" sound coming for rear

    I recently got a complete rearend rebuild from unitrax but shortly after I start get a weird clunk sound coming from what I think is the passenger side rear. At first when I noticed it I also noticed that I had a low tire from a nail. i put air in the tire and I couldn't get the sound to...
  19. 2

    Picked up a cam need help reading the cam card

    Im one step closer to my buget head and cam swap. Im picking up a custom cam that was supizing pretty close to wait I was looking on having ground anyways. The heads are getting send off next week to the porter he said I should see 290+ at .600' when he is done. I can understand some of this cam...
  20. 2

    Got some heads into today what do I have?

    I bought these heads off another member here on the forum now im trying to figure out what I have. The heads have some porting done but Im not sure how much have been dont since I havent seen stock heads to compare. The heads do have one vavle set coming out and they will need to be milled but I...
  21. 2

    Need help picking cam and valve springs

    I recently bought a set of heads that I was told have been ported and where thought to be hennessey heads but he was un sure. But I plan on sending them out anyways to get rebuilt and ported and milled. Before I send them out I need to pick a valve spring to have put on the heads. So right now...
  22. 2

    When I shut the passenger side door the car honks?

    Well I just pulled in to the gym and had to grab my wallet out of the passenger side and when I **** the door the car honks?
  23. 2

    Underdrive pulley help

    Im looking at doing a buget underdrive pulley upgrade to my 02. I remember reading that you could use a 5.9 Dakota underdrive crank pulley as an underdrive pulley on our cars. Is there anything else to this? Is it just as simple as adding that pulley and a shorter belt? Is there anything else I...
  24. 2

    3.73 Gear Review

    First I would like to start off by thanking Devin at Unitrax and Parts rack for all there help and great pricing. I finally put on 350 miles since the gears have been put in so I was able to take her through the gears. My frist thought was just how hard it pulled in 2nd and 3rd. First just...
  25. 2

    Anyone in the L.A. free on the 27th?

    Im dropping off my car at unitrax shop tomorrow and will be waiting at the shop all day to get the gears done. Just wanted to see if anyone in the area was free to go to lunch or somthing. Anythings better then sitting around all day

Latest posts

Members online

Total: 641 (members: 5, guests: 636)

Forum statistics

Threads
153,190
Posts
1,681,851
Members
17,685
Latest member
Lennatave

Share this page

Top