2 Gen I with different mods

Discussion in 'Dyno Results' started by Alley, May 30, 2010.

  1. Alley

    Alley Viper Owner

    Posts:
    97
    Joined:
    Oct 28, 2003
    Location:
    Lincoln, NE
    So I got Belanger Headers, no cats, roe mufflers, VEC2, ported/milled heads by greg good, and 3.73 gears. 1995 Gen I. It was a crappy day for dynoing. 3% correction factor. Put down 430rwhp/480rwtq.

    My buddy Max has a 93. Same exhaust all the way. Now he has stock heads. But he went with the 708 cam and 1.7 rockers. And stock Gears and stock tune. So we were excited to see the difference in routes we took in the mods. Well the numbers were basicly the same! 429rwhp/475rwtq.

    The dyno guy said my gears might be taking a little hp and tq away too, but it was hard to say how much.

    But I thought it was cool to get those numbers for 2 gen I's with different mods on the same dyno on the same day.
     
  2. TomH

    TomH Viper Owner

    Posts:
    68
    Joined:
    Apr 27, 2003
    Location:
    Lincoln, Ne
    [​IMG]

    [​IMG]
     
  3. 99 R/T 10

    99 R/T 10 Enthusiast

    Posts:
    10,315
    Joined:
    Jun 4, 2001
    Location:
    Enterprise, AL USA
    The 708 is a great all-around camshaft. Add the 1.7 RR, you get a nice combo. Not too radical adn good power. Do you have 1.7 RR? If not, I bet you will pick up 50-60 with the addition of the 708 cam and 1.7s.
     
  4. rocknroll

    rocknroll Viper Owner

    Posts:
    13
    Joined:
    Dec 15, 2009
    Beware Craig, I'm looking for 2hp (ha-ha)

    Had a good time in Lincoln, Thanks for putting this together.

    Max
     
  5. vipzilla

    vipzilla Viper Owner

    Posts:
    552
    Joined:
    Jun 4, 2008
    Location:
    CAPE COD MASS.
    does max have a vec as well
     
  6. Alley

    Alley Viper Owner

    Posts:
    97
    Joined:
    Oct 28, 2003
    Location:
    Lincoln, NE
    Nope. And he was anywhere from a 1/2 point to 3/4 point leaner on his stock tune. Mid-high 13s for him I believe.
     

Share This Page