Brembo calipers - Replacement Seals and Dust Boots?

Discussion in 'Tire , Wheel, Brake and Suspension' started by Phildo, Nov 11, 2014.

  1. Phildo

    Phildo Enthusiast

    Posts:
    1
    Joined:
    Nov 10, 2014
    Hello,

    As much as I’d love to have a Viper here in Australia, I’ll have to settle for the Ford Falcon XR6 Turbo ute that I bought a few months ago.

    I need to rebuild a pair of front Brembo calipers that I have bought for it, as well as rebuilding some other Brembo calipers that I have here and will be selling.

    Why post here? These calipers use the same pads as the calipers that are on the Viper.

    I need to buy:

    Dust boots required:
    1 x 30mm
    4 x 36mm
    5 x 40mm
    1 x 44mm

    Seals required:
    4 x 36mm
    4 x 40mm

    Searching on here shows results dating back about 10 years (i’ve sent emails). Does anyone have info on places that currently have stock of this stuff and is reasonably priced?

    Info possibly useful for other people:

    Brembo part numbers

    Inner Seals:
    24mm: 05.5955.50
    26mm: 05.5955.51
    28mm: 05.5955.52
    30mm: 05.5955.53
    32mm: 05.5955.54
    34mm: 05.5955.55
    36mm: 05.5955.56
    38mm: 05.5955.57
    40mm: 05.5955.58
    42mm: 05.5955.59
    44mm: 05.5955.60

    Dust Boots:
    28mm: 20.4872.40
    30mm: 20.4872.41
    32mm: 20.4872.42
    34mm: 20.4872.43
    36mm: 20.4872.44
    38mm: 20.4872.45
    40mm: 20.4872.46
    42mm: 20.4872.47
    44mm: 20.4872.48

    Kits - Genuine Brembo:
    Rebuild Kit - 24mm: 105.5955.50
    Rebuild Kit - 26mm: 105.5955.51
    Rebuild Kit - 28mm: 105.5955.52
    Rebuild Kit - 30mm: 105.5955.53
    Rebuild Kit - 32mm: 105.5955.54
    Rebuild Kit - 34mm: 105.5955.55
    Rebuild Kit - 36mm: 105.5955.56
    Rebuild Kit - 38mm: 105.5955.57
    Rebuild Kit - 40mm: 105.5955.58
    Rebuild Kit - 42mm: 105.5955.59
    Rebuild Kit - 44mm: 105.5955.60

    StopTech Part Numbers
    Available from http://www.zeckhausen.com/Brembo/Consumables.htm#Rebuild

    Kits:
    26mm = 143.99026K
    28mm = 143.99028K
    30mm = 143.99030K
    32mm = 143.99032K
    34mm = 143.99034K
    36mm = 143.99036K
    38mm = 143.99038K
    40mm = 143.99040K
    42mm = 143.99042K
    44mm = 143.99044K
    46mm = 143.99046K

    Inner Seals:
    26mm = 753.99018
    28mm = 753.99000
    30mm = 753.99001
    32mm = 753.23411
    34mm = 753.24471
    36mm = 753.99003
    38mm = 753.99004
    40mm = 753.99005
    42mm = 753.99006
    44mm = 753.99007
    46mm = 753.23360

    Dust Boots:
    26mm = 750.99016
    28mm = 750.99000
    30mm = 753.99001
    32mm = 750.99012
    34mm = 750.99002
    36mm = 750.99003
    38mm = 750.99004
    40mm = 750.99005
    42mm = 750.99006
    44mm = 750.99007
    46mm = 750.99018

    [​IMG]

    [​IMG]
     
    Last edited: Nov 11, 2014
  2. Fatboy 18

    Fatboy 18 Viper Owner

    Posts:
    5,092
    Joined:
    Jan 16, 2008
    Location:
    Surrey, United Kingdom
  3. Tom F&L GoR

    Tom F&L GoR Viper Owner

    Posts:
    4,983
    Joined:
    Oct 3, 2000
    Location:
    Wappingers Falls
    I can vouch for Zeckhausen, I got seals for the 40mm rear Brembos from them.
     

Share This Page