Viper Specialty's latest activity
-
Viper Specialty replied to the thread Mild overheating problem Please Help.Check fan wiring at the fan solenoid. They often break inside the insulation and look like they are intact, when they arent. Pull the... -
Viper Specialty replied to the thread AC blowing hot under acceleration.Unrelated. He has a Tire Pressure Sensor Issue he posted about elsewhere.
-
Viper Specialty replied to the thread Viper Mod Quiz - New Owner Help??.#3 is a power cable for a Valentine 1 Radar Detector.
-
Viper Specialty replied to the thread AC blowing hot under acceleration.Can always deal with this... and your TPMS at the same time!
-
Viper Specialty replied to the thread AC blowing hot under acceleration.In general, this is not a common complaint for G3+, as you have to be pretty far on the pedal for A/C cut to occur. The first thing you...
-
Viper Specialty replied to the thread AC blowing hot under acceleration.Recirc Mode may help slightly, but not all that much.
-
Viper Specialty replied to the thread AC blowing hot under acceleration.It means change the programming so that it is harder to have the A/C compressor disengage during throttle changes. It sounds like...
-
Viper Specialty reacted to BoondocSaint's post in the thread AC blowing hot under acceleration with
Like.
I have plenty of popcorn for this lol. Learning plenty about how these systems work. The extent of my understanding was replace o-rings... -
Viper Specialty reacted to MoparMap's post in the thread AC blowing hot under acceleration with Like.
The vents aren't controlled by vacuum, they are controlled by electric actuators on top of the box. I have the service manual in front...
-
Viper Specialty replied to the thread AC blowing hot under acceleration.Bill, You are incorrect, trust me. What you are stating applies to Gen-1/2 cars, NOT Gen-3+. 2003+ has no vacuum actuators of any kind...
-
Viper Specialty reacted to MoparMap's post in the thread AC blowing hot under acceleration with Like.
I don't think any part of the HVAC system is tied to vacuum on these cars. The doors and actuators are all electronic from what I've...
-
$65 shipped.
-
Viper Specialty replied to the thread Anyone used HP Tuners on a gen 3?.Boiled down: For Gen-2/3... SCT has more capabilities, but is harder to understand if you arent familiar. HPT is handicapped and...
-
Ya, this build is not my jam. This guy really wants you to know this GTS is an ACR, but he has removed everything ACR from the car...
-
Viper Specialty replied to the thread Gen II Wiring Harness Routing - Heat Damage.We actually have rolls of the OEM tape used to make these harnesses. As pointed out, you need to lift that off when warm, unwrap, check...
