4 POST CAR LIFT GROUP BUY!!! MORE INSIDE. NOT A BAD DEAL.

Qualitywires.com · Mar 3, 2005

Well, I was hoping to get more than $200 off on the car lift below, but the owner said he could not go any lower and plus his distributors would not like it. So here are the details to get this offer:

Here's the lift and the specs:

You must be registered for see images

You must be registered for see images attach

Cost of the Lift: $1850.00 - $200.00 = $1650.00 plus shipping charges.

You get a lot with this lift and also a 5 year warranty.

There has to be a minimum of 6 lifts bought at once. I am in so that is 5 left to buy.

The way it has to be paid is in one lump sum. So this is what you can do if you are serious about this, make the check payable to the manafacturer and I will hand deliver the checks to them and the lifts will be sent out.

Who is SERIOUSLY interested in this offer? I am NOT making any money on this deal, I just want a good deal like everyone else. (So keep this thread serious and don't be an ass with useless side comments please). If you want to make useless comment..just PM me.

I have one week to respond to the distibutor on this offer. Any questions you may call me at 502-419-0133

Adam

2002_Viper_GTS_ACR · Mar 3, 2005

I have a useless comment... GO PISS OFF YOU ****... you talked all big about how you were going to beat my deal... and in the end, you simply matched it. Yeah, glad to see you have big strings with the owner...

Anyway, now that I am done bashing you... and allowing you to prove I was right, and I stopped you from making a profit off us. Please put me down for one.. SERIOUSLY.

You have my number to call me if you think I am playing.

Jon

Mopar Steve · Mar 3, 2005

Where will they be shipped from? How much is freight?
Will I save freight if I buy two?
I don't need castors is there any significant savings without them?

My garage wont be finished until august, but for a great deal I will store the lifts till then.

RoadKing · Mar 3, 2005

Ab,

Count me in for one.

Dave

ACR steve · Mar 3, 2005

I might be interested. How does it compare with a Revolution?

2MANYTOYS · Mar 3, 2005

I'm interested! How much for freight?

CHAD · Mar 3, 2005

Isn't that what tuners are for?

Mighty GTS · Mar 3, 2005

I need a shipping quote to 19067 PA or thereabouts.

Qualitywires.com · Mar 3, 2005

Okay guys,

PM me your address and I will find out the shipping cost. (Yes Jon..even though you are a [******]

I will help you out...just because I feel sorry for you and all the attention you crave off my posts.).

Now on a serious note..we just need a few more...maybe Vipermad will make this a sticky thread....PLEZ!

I will list all the people who COMMIT to this buy and PM you with your individual cost on shipping. Again, you will make the out the check to the distributor and NOT me.

I will submit the payment all at once to the distributor with all shipping info.

Again, I want a cheaper price for myself so this is why I am doing it. We just need a few more to do this buy.

Thanks!

Again, call me if you have questions. 502-419-0133

As far as comparison, I don't know. I never had a 4 post lift, but these are selling like hot cakes and they must be some what decent lifts...especially with a 5 year warranty.

Qualitywires.com · Mar 3, 2005

So far the people interested:
1: AB
2: Jon Avezedo
3: Road King (Dave)
4: 2manytoys
5: Mighty GTS
6: Utah Viper

I will find out shipping cost, but potentially we have enough to do the buy if everyone sticks with it...anyone else?

WANTED · Mar 3, 2005

So far the people interested:
1: AB
2: Jon Avezedo
3: Road King (Dave)
4: 2manytoys
5: Mighty GTS
6: Utah Viper

I will find out shipping cost, but potentially we have enough to do the buy if everyone sticks with it...anyone else?

ADD ME TO THE LIST, I WILL CALL YA TONIGHT. TOM :2tu:

Qualitywires.com · Mar 3, 2005

So far the people interested:
1: AB
2: Jon Avezedo
3: Road King (Dave)
4: 2manytoys
5: Mighty GTS
6: Utah Viper
7: Wanted

ViperJohn · Mar 3, 2005

Who makes the lift? Is the clearance Viper friendly?

Might be interested.

Dr Roof · Mar 3, 2005

put me down for one maybe 2

twinvipers · Mar 3, 2005

PM sent

1 or 2, maybe 3 for me also.

Qualitywires.com · Mar 3, 2005

Re: 4 POST CAR LIFT GROUP BUY!!! MORE INSIDE. NOT A BAD DEAL.
#511829 - 03/03/05 08:26 PM Edit Reply Quote Quick Reply

So far the people interested:
1: AB
2: Jon Avezedo
3: Road King (Dave)
4: 2manytoys
5: Mighty GTS
6: Utah Viper
7: Wanted
8: 99 R/T 10
9: rjspen
10: vipernate
11: Dr. Roof
12: Twin Vipers

Again, only inquire if you are serious. I need to get an accurate quote.

Viperjohn...these are viper friendly. If my car can get on it...your surely can.

Jay Herbert · Mar 3, 2005

I've been looking at lifts for quite a while, $1650 FOB Indiana is pretty low for a lift, scary low.....

Here is the list of questions I ask when looking:

Internal or externally guided on posts?

If external, does it completely encase the post?

What is the gage of steel and dimension (3" x 3", 4" x 4"?) used for posts.

Does Complete Hydraulic make this lift (US Made) or is it made in China?

Is it a "free standing" lift, or does it require anchoring?

Is the lift structurally tested with laboratory-certified test results as required by U.S. safety standards?

Is Complete Hydraulic/the distributor warranter, or the manufacturer?

Is the hydraulic pump included in the warranty?

Looks like you may have found a pretty good deal (even at $1850, that is about as cheap as I've seen a lift), Looking forward to details.

vipernate · Mar 3, 2005

I hear ya Jay. We just paid $3k for a lift. I would be very interested in hearing the answer to your questions. If this is real, then we will buy at least 1.

mattacr · Mar 3, 2005

Hi,
I have 7 of these lifts. I use one for my Viper, I have one at the shop, and have sold 1. I have 4 lifts left. I am located in Elkhart IN 46516 If you would like to buy a lift please call me at 574-903-5662 I can help you get a good shipping price or I can deleiver it and help you set it up, depending how far away you are from Elkhart. Also if you would like to see the lift in person you can.

Matt

Qualitywires.com · Mar 3, 2005

I've been looking at lifts for quite a while, $1650 FOB Indiana is pretty low for a lift, scary low.....

Here is the list of questions I ask when looking:

Internal or externally guided on posts?

It appears it is guided internally like the picures below. It's simliar to the white one.

If external, does it completely encase the post?

What is the gage of steel and dimension (3" x 3", 4" x 4"?) used for posts.

Not sure besides what on the description, but I have seen them in person and they seem to be beefy. Like I said it appears to be almost identical to the white one in the picture...

Does Complete Hydraulic make this lift (US Made) or is it made in China?

Is it a "free standing" lift, or does it require anchoring?

It's a free standing lift. It also has castors. It can be anchored if you want, but not needed

Is the lift structurally tested with laboratory-certified test results as required by U.S. safety standards?

I am told they exceed the requirements..These lifts can hold more than 20,000lbs max, but they are rated for 8,000 safe lbs for lifting

Is Complete Hydraulic/the distributor warranter, or the manufacturer?

I am not sure on that one .

Is the hydraulic pump included in the warranty?

Yes the hydraulics come with a 2 year warranty I think that is standard.

Looks like you may have found a pretty good deal (even at $1850, that is about as cheap as I've seen a lift), Looking forward to details.

Also too, I heard that they can sell these lifts for a low price because they sell a lot in volume. They sold 20 lifts yesterday alone.

We would like to introduce Complete Hydraulic Service and Sales, Inc. as your newest equipment distributor and service center. Complete Hydraulics Service and Sales, Inc. has been serving the hydraulic equipment industry for more than 60 years! We have recently relocated to our new 13,000 square foot facility which will increase our ability to service a wider range of hydraulic equipment and allow for a heavier stock of inventory. Likewise, Complete Hydraulic Service and Sales, Inc. is expanding its horizons by providing sales and parts service outside the Indiana region with the addition of this web site and national marketing.

Qualitywires.com · Mar 3, 2005

So far the people interested:
1: AB
2: Jon Avezedo
3: Road King (Dave)
4: 2manytoys
5: Mighty GTS
6: Utah Viper
7: Wanted
8: 99 R/T 10
9: rjspen
10: vipernate
11: Dr. Roof
12: Twin Vipers
13: Achilles99 (cheaper if you pick up with Avezedo)

Qualitywires.com · Mar 3, 2005

oh, by the way the Lambo in the picutre is th owners.

You must be registered for see images attach

2002_Viper_GTS_ACR · Mar 4, 2005

HEY ADAM BRENNAN.. WHO THE HELL SAID I WANTED MY FULL NAME LISTED...

btw, do you need my address ? So we can figure out shipping. I sure hope Ling gets one too, so we can split some shipping !!

Anyway, just shoot for Cary, NC and let me know shipping cost.

Jon

PS. BTW, I bet they cant reverse that picture and put the lambo on the top

(do the math on where the other one has to go...)

Fred(DrivingSchool)Kinder · Mar 4, 2005

Have been working with a major manufacture of Commercial lifts. Will have special VCA pricing very soon like one or two weeks. Lift will be on display at the Long Beach Grand Prix. This is not a cheap look nice lift, it is a commercial lift with a capacity of 9000 pounds. They also have lifts up to 40,000 pounds.

General comment a very critical element is the surface where the lift is to be mounted. Concrete spec's will be provide for this lift.

If you want a GOOD lift at a good price wait a few days. The lift will also have some special badging.

And Made in the USA! :usa:

THOR · Mar 4, 2005

ab - How much of an $ adder is the "Key Security" Lock?

Qualitywires.com · Mar 4, 2005

I am not sure..I will find out about the key lock.

Fred if you have a better lift then how much? I have no loyalty to the above one, but if you're talking thousands of $ more, then it defeats the purpose of this buy. I am wanting to get a cost effective lift. If I could buy two of these lifts for the price of just one of yours, then I think I would go with this buy and buy two. These lifts are good lifts and will work well for the people who don't have a need to raise their cars 10 times a day. I am sure your lifts are awesome, but what would be the cost and also shipping from the west coast? Am I going to be in the $4k plus range?

Jon...yes it will be cheaper if Achilles does it. Sorry, I forgot to spell your last name Assvedo to hide your real last name.

THOR · Mar 4, 2005

Have been working with a major manufacture of Commercial lifts. Will have special VCA pricing very soon like one or two weeks. Lift will be on display at the Long Beach Grand Prix. This is not a cheap look nice lift, it is a commercial lift with a capacity of 9000 pounds. They also have lifts up to 40,000 pounds.

General comment a very critical element is the surface where the lift is to be mounted. Concrete spec's will be provide for this lift.

If you want a GOOD lift at a good price wait a few days. The lift will also have some special badging.

And Made in the USA!

Fred - Why toss out a post like this teaser, when you don't give enough info to allow a comparison? Also, your teaser will not even be detailed, until this offer expires?

Fred(DrivingSchool)Kinder · Mar 4, 2005

The deal I am working will include shipping and installation for the Continental USA. Pricing will be very good and the quality GREAT.

Living in earth quake country stability was important, having a 5 year old son makes general quality and safety very more important than price. I do consider pricing a very important element. I also want a lift with special VCA badging to make our garages a little different. This lift also has and optional lift to raise the car by the frame on the lift.

Jerry Dobson · Mar 4, 2005

Before I buy a lift, I would do a little research. There have been a few lifts posted on forums that have fallen. I personally do not know anything about this lift so I can only comment from the pictures.

Here are a few items I see that concern me:

It appears that the "stop locks" are welded.

Are there any secondary locks if the cable snaps?

The location of the cable is not centered in the upright post. This in turn makes for an external lift/support cable. This puts torsional load on the pulley sheaves.

The lock release...well it just looks low end.

The shipping weight is about 350 pounds less than a name brand lift = thinner metal.

Can you get spare parts for this lift? When your cylinder leaks in three years, do you have to throw the lift away? Will this company be around in a few years to support it?

I would only buy a lift that was ALI certified. All the better lifts are. If a lift is safe, it should pass ALI.
http://autolift.org Click on the "What good standards are" and read about the bus that fell.

This lift may work just fine. I like to buy a little more insurance. I sell and use Revolution. I don't make any money selling them to the Viper community. They are more money. About $3k delivered. Thinking back......I paid well over three grand for a complete exhaust system, so 3k is not that much money to keep a $85k car in the air (and off my head).

I am not saying "Don't buy this lift". Just wanted to voice my concerns.

Fred(DrivingSchool)Kinder · Mar 4, 2005

THOR,

Sorry this is not a teaser!

I have been working with a major commercial manufacturer for several months. Their President and VP have to approve our program. It will be VCA limited for the badging and total package pricing.

If you think the lift pictured under this topic is what you want please buy it! Personally I would not put a lift in my garage if it were free unless it passed commercial testing!

4 POST CAR LIFT GROUP BUY!!! MORE INSIDE. NOT A BAD DEAL.

Supporting Vendor

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Viper Owner

Supporting Vendor

Supporting Vendor

Enthusiast

Supporting Vendor

Enthusiast

Enthusiast

Enthusiast

Supporting Vendor

Enthusiast

Enthusiast

Enthusiast

Supporting Vendor

Supporting Vendor

Supporting Vendor

Enthusiast

Enthusiast

Viper Owner

Supporting Vendor

Viper Owner

Enthusiast

Enthusiast

Enthusiast

Similar threads

Forum statistics

Share this page