How much to stripe?

150shot

Enthusiast
Joined
May 9, 2003
Posts
79
Reaction score
0
Location
San Dimas, CA
Hello- I know this has been posted previously, but doing a search for stripes pulls up way too much..can anyone tell me a rough estimate to stripe a viper? just like factory..also if anyone has done the custom split stripe where it starts as one , any feedback would be great..

thanks!
 

Warfang

Enthusiast
Joined
Nov 27, 2004
Posts
6,912
Reaction score
0
Location
California, East Bay
You'll get a lot of suggestions for vinyl... don't do it! Painting is the right idea. I'm still unhappy with my vinyl stripes, and waiting for the time available to get them painted. From what I gathered, it ranges from $4k-$12k with $8k being average. Your milage may vary, but don't be afraid to shop around for better prices.

Good luck getting your snake! :2tu:
 

BDZ1984

Enthusiast
Joined
Jul 19, 2005
Posts
271
Reaction score
1
Location
Frisco, Texas
it does depend on how many miles are on your car because any chips must be fixed first before laying stipes down or when you go to clear the panel it will be ugly.... for a car with no miles I charge 2k and one with some miles its closer to 3k.. who ever you have do it make sure they know what there doing in laying out the stripes. I have seen way to many cars that are just plain F-ed up...
 

Warfang

Enthusiast
Joined
Nov 27, 2004
Posts
6,912
Reaction score
0
Location
California, East Bay
it does depend on how many miles are on your car because any chips must be fixed first before laying stipes down or when you go to clear the panel it will be ugly.... for a car with no miles I charge 2k and one with some miles its closer to 3k.. who ever you have do it make sure they know what there doing in laying out the stripes. I have seen way to many cars that are just plain F-ed up...

$3k? Geez, I'd save $$$ shipping my gts to you to have it done... know anyone in northern cali that works at your rate? :D
 

PDCjonny

Enthusiast
Joined
Nov 2, 2004
Posts
5,999
Reaction score
3
Warfang, your quotes are out of whack. I'm here on Long Island, it ain't exactly cheap living and I have had quotes of 3K to maybe 5K.

You have to consider that unless you are planning on keeping the car indefinetly you may be effecting the resale price by striping a non factory striped car. At the least you will be somewhat limiting an already small pool of potential buyers. Thats the advantage of vinyl (besides the price and "risk" of a bad paint job) Many buyers are turned off by non factory bling mods.
 

Warfang

Enthusiast
Joined
Nov 27, 2004
Posts
6,912
Reaction score
0
Location
California, East Bay
Warfang, your quotes are out of whack. I'm here on Long Island, it ain't exactly cheap living and I have had quotes of 3K to maybe 5K.

You have to consider that unless you are planning on keeping the car indefinetly you may be effecting the resale price by striping a non factory striped car. At the least you will be somewhat limiting an already small pool of potential buyers. Thats the advantage of vinyl (besides the price and "risk" of a bad paint job) Many buyers are turned off by non factory bling mods.

I'm just quoting prices I've read from here. The lowest I've read here over the years is $4k (now $3k), while the highest about $10-12k. This included complete disassemly of body panels, taking all of the old paint off and starting from scratch with the end result being no raised paint where the stripes are, and clearcoat above that. A bit too meticulous for me, but for some, worth the money. If anything, my average price might be off... I just took the medium of $4-12k. Seems people are more in the $3k-4k area.

If I'm bored today, I'll go look it up and link it here.
 

IEATVETS

Enthusiast
Joined
Feb 16, 2004
Posts
2,348
Reaction score
0
Location
Cottage Grove, Wis.
I put vinyl on mine to see if I would like it. I loved the looks of the car so much I had the stripes painted on and have never regretted it for a second. I paid $3k for mine and they removed front fascia, hood, roof, decklid and rear bumper so they would not get overspray on the rest of the car. Painted on the stripes and then cleared the entire car. I could care less about resale cost on my car mine it is so far from stock anyways. If I ever do sell it, I will then deal with it but for now it is my car and I will make it my own.
 

EllowViper

Enthusiast
Joined
Mar 28, 2006
Posts
1,656
Reaction score
0
Location
Valrico Florida
Timely thread...I'm just waiting for a callback for my estimate to stripe (painted) my GTS as well as install the poser GTS-R roof vent. I'll provide hopefully later today when the numbers come in...yikes!
 

Rolstar

Enthusiast
Joined
Aug 21, 2004
Posts
621
Reaction score
0
Location
Whippany, NJ
Just did mine. Check out the previous thread."stripes are In". Mine cost $2800, and the guy did a phenominal job. You can't even feel the edge.
Knights Collision 215-633-5988
Bensalem, PA ask for Mike
 

plumcrazy

Enthusiast
Joined
Jun 9, 2003
Posts
16,243
Reaction score
7
Location
ALL OVER
id think 3K is about right.

but do your homework on them, go look at a few jobs they have done to see if they look good or onot. i have seen a few that look like garbage
 

MacManInfi

Enthusiast
Joined
Oct 11, 2005
Posts
297
Reaction score
0
Location
Orange County, CA
Got a quote from Quigleys Paint and Body in Orange, CA. Great guys who do awesome work. Quote was in the neighborhood of $2k. Would be clear coated.

I was ready to pull the trigger, and then I found four bubbles under the paint on my hood... sigh. Don't wanna stripe the hood if its gonna need to be stripped later to let it gas out.
 

TomSlick

Viper Owner
Joined
Aug 23, 2004
Posts
198
Reaction score
0
Location
Southeast Tennessee
If you haven't bought yet and want a striped car, then I'd just go out and buy a striped car (your sig. says GTS coming soon). Just my 2 cents worth.
 

vinnieviper

Enthusiast
Joined
Oct 24, 2005
Posts
31
Reaction score
0
Location
akron ohio
i just had mine restriped from a half a$$ job that was done before i bought it.... i paid 2500.00 for stripes side sills and some misc touch ups.. thank god i dont live where warfang does !!8k average !! find a reputable body shop and talk what you want done exactly... big money does not always gaurantee a great job !!
 

Warfang

Enthusiast
Joined
Nov 27, 2004
Posts
6,912
Reaction score
0
Location
California, East Bay
i just had mine restriped from a half a$$ job that was done before i bought it.... i paid 2500.00 for stripes side sills and some misc touch ups.. thank god i dont live where warfang does !!8k average !! find a reputable body shop and talk what you want done exactly... big money does not always gaurantee a great job !!

I corrected myself... $8k was just the middle of the amounts other members quoted. Most tended to be $3-4k, but I assume being in San Franfreako, I'm gonna have to bend over for anything... pun intended! :D
 

GCHDEALER

Enthusiast
Joined
Sep 24, 2002
Posts
998
Reaction score
0
Location
MARIANNA,FL,USA
OMG........For F'ing stripes. You have to be kidding me. I can have them done for less than $1000.00 all day long. Factory or wider. They will be applied the same way that the factory does it. Here are a few pics of my custom stripes. 10" wide vs 8" wide. They line up perfectly. In some of the pics they look like they are off from panel to panel but they are not.
4356April_06_022-med.jpg

4356April_06_021-med.jpg

You must be registered for see images

4356April_06_013-med.jpg

4356April_06_014-med.jpg
4356April_06_009-med.jpg
 

starcity

Enthusiast
Joined
Dec 19, 2005
Posts
37
Reaction score
1
Location
San Francisco Bay Area, CA
(Warfang) Josh,

I Viper client of mine highly suggested Lucky 7 in the Antioch/East Bay Area. They quoted him $1800-$3000 depending on the job you want. They said the $1800 would be a really nice job and $3000 would be an amazing job where they would clear coat the entire top of the car. They did some work on my clients truck and are in most custom car magazines for their work. Give them a shot.

Contact Marco at 925.754.4393

Lucky 7 Auto Body
104 Railroad Ave
Antioch , CA 94509


Let me know how things turn out.

Chris
 

dansauto

Enthusiast
Joined
Nov 30, 2001
Posts
939
Reaction score
0
Location
gillett, pa, usa
OMG........For F'ing stripes. You have to be kidding me. I can have them done for less than $1000.00 all day long. Factory or wider. They will be applied the same way that the factory does it. Here are a few pics of my custom stripes. 10" wide vs 8" wide. They line up perfectly. In some of the pics they look like they are off from panel to panel but they are not.


Chad are they clear coated and buffed in or are they single stage on top of the factory paint?
 

Latest posts

Members online

Forum statistics

Threads
153,197
Posts
1,681,909
Members
17,696
Latest member
sloth
Top