Stoptech cross-drilled rotors
- Thread starter PJJP
- Start date
Dustman
Viper Owner
Thanks for the pictures and Info Wiseasp 
YellowViperSRT10
Enthusiast
I have had the Euroteck's now for about a year. They look awesome and they perform GREAT.
ROB
Sweet!!!! gosh they look so nice when they are new!
I am gonna put the same set on my new 08 Coupe. I had slotted on my last Viper, and wanna try the drilled and slotted this time since they look so good!STREET DOC
Enthusiast
NAMES AND OR HISTORY HAS TO START SOME WHERE IM GOING WITH EUROTECH .......
IM GOING WITH EUROTECH .......jamie
Enthusiast
I have had the Euroteck's now for about a year. They look awesome and they perform GREAT.
ROB
You're very tiny!
STREET DOC
Enthusiast
A CALIPER WITH FEET
dave6666
Enthusiast
NAMES AND OR HISTORY HAS TO START SOME WHERE
Amen DOC!!!
YellowViperSRT10
Enthusiast
musicncars
Enthusiast
I've got to get those. Are they for all gen's?
Last edited:
wiseasp
Enthusiast
You're very tiny!
That is funny. That is the Viper tech from Woodhouse that worked on my car. I had Mark Jergeson send me photos while they worked on the car....
I have had my rotors for 1 year now and 2500 miles and they still look the same as day 1.
ROB
ILLSMOQ
Enthusiast
I think the euroteks are zinc washed? My stop techs are not and are rusting where the pad does not touch the rotor. I should have had them zinc washed.
YellowViperSRT10
Enthusiast
Yes, they are zinc washed.
2002_Viper_GTS_ACR
Enthusiast
'By about'.. you mean EXACTLY 29 LBS ! Dont round up. Mike and I weighed them together on a digital scale, it came up solid 29 lbs saving.. on my car. Maybe drilling drops another 2 lbs... but I'd be suprised.
Jon
ILLSMOQ
Enthusiast
2002_Viper_GTS_ACR
Enthusiast
....maybe your rotors were worn more
You must be registered for see images
You are hands down the biggest *** moe on here. <eom>
I've got a complete 13" (Gen 1 & 2)front brake kit for sale. Slotted and drilled Stoptechs, Bremebo calipers, stock brake lines and EBC pads. 20,000mi. on calipers and about 10K on 2 piece lightweight rotors.
Only $650. See ad in classified section.ViperClub Classifieds - Message - Powered by PhotoPost Classifieds
Send me a PM
Ted
You must be registered for see images
Only $650. See ad in classified section.ViperClub Classifieds - Message - Powered by PhotoPost Classifieds
Send me a PM
Ted
ILLSMOQ
Enthusiast
Yup, when you use performance pads and break them in properly (according to stop-techs site instructions) your rotors should have burned the paint off of the pads and your rotors should have a blue color to them. Then they're broken in properly. It's not the slow stops that color them, it's the many stops from 100mph that get them at optimium operating temp. I suspect this process temper both the pads and the rotors for a longer life. There's no door in those used rotors, they've been sitting for 4 months before the pic. They just look like any other used rotor.
They look like the Roe Racing 14" rotors I replaced them with (except no holes in my Roes).
Ted
You must be registered for see images
They look like the Roe Racing 14" rotors I replaced them with (except no holes in my Roes).
Ted
Here's before I removed the wheels. Different light angles, different colors
rust color.
Ted
You must be registered for see images
rust color.
Ted
Similar threads
