gen 2 forgelines on a gen 3
- Thread starter klpilot
- Start date
Gen 2 18 inch Forglines would not clear the brakes on a Gen 3 when we fitted them.
pattymelt3605
Enthusiast
My gen 2 19" HRE wheels fit on my gen 3.
- Joined
- May 1, 2004
- Posts
- 3,471
- Reaction score
- 2
Depends on the style and offset of the Forgeline wheel. Some will likely fit, some won't. You have a much better chance of the 19 / 20's fitting than the 18's. Offset is important here too, not just wheel size.
I can tell you that the standard SX3 Forgelines made for Gen II in 18 inches, won't fit on SRT-10s. The bolts that hold these wheels together will touch or hit the cross over brake line at the bottom of the brake caliper.
The VR1's pictured above will likely fit if the offset is correct.
I can tell you that the standard SX3 Forgelines made for Gen II in 18 inches, won't fit on SRT-10s. The bolts that hold these wheels together will touch or hit the cross over brake line at the bottom of the brake caliper.
The VR1's pictured above will likely fit if the offset is correct.
GTS-R 001
Enthusiast
front VR1's fit, rears need a spacer to fit
SmoknTires
Enthusiast
Agree with 001. VR1's clear the front, need small spacer on the back.
