Need info in NJ

Turboz1r · May 9, 2012

Hi Guys,

Just got my 1997 GTS, which is the car I always wanted. My friend was the original owner and I bought it from him with 4400 miles on it. I want to put new tires on it and was wondering where would be the best place to have them mounted in Central New Jersey. Been reading this site for some time, wealth of information for sure. Hope to see some of you at the local gatherings.

Mike in NJ

VIPERUSA · May 10, 2012

http://www.nielsendodgechryslerjeepram.com/index.htm

Scott Sorrentino " The wrench " NARRA Chief Technical Inspector Viper Mechanic
Nielson Dodge Rt10,, just south of Rt80 off 287
he just did my tires,,new SSports fort my 03 and also did a set for my brothers 04
great guy and it doesnt cost a "arm and a leg" like it does in NY
and a suggestion,, have an alignment done,, state of the art machine,, in Ny they use a string, if you saww how my tires wore you would believe me
pm me if you need any info

Turboz1r · May 10, 2012

Thanks for the info, I'll check with them if I don't find anyone closer to my area.

Mike G

mgeorge · May 10, 2012

Turbo Z1R, I see you are a Mike G. Same here! I've heard great things about Scott Sorrentino as well, you always have Chuck Tator as an option too, a little farther away but where I go for anything Viper related.

Separately, I'm not sure where you are located but we have a cars and coffee in Northern NJ usually every other Saturday at the Parsippany Hilton, on Route 10 in Parsippany. We've had a few Vipers there over the past couple months and there is always a good turnout of the various exotic car brands. 8:30am to 11:30am.

mgeorge · May 10, 2012

Update to last post--the C&C this Saturday is 109 Morristown Road (Route 202), Bernardsville, NJ. 8:30 - 11am.

Turboz1r · May 10, 2012

Hi Mike,

I went to the last C&C at the Hilton but no one was there. It was on the correct date, but no turn out. I am in the Bridgewater/Somerville area, and was up in the Blairstown area last weekend as I have a friend who is a Dodge Service manager who lives up there. Wanted to show him the new car so went to Hilton first then Blairstown from there. Hope to meet you sometime this summer.

Mike G

mgeorge · May 10, 2012

Yes, it seems like they keep moving the location and updates are only posted to a yahoo groups page which I'm on. I know the one this weekend is at the address I posted above, hopefully there is some consistancy in the future with the meeting spot.

tim721 · May 10, 2012

Hey Mike, welcome. I went to the Hilton the other week and found nobody there either.

I look forward to meeting up with you guys soon.

viper GTS-R · May 10, 2012

Hi Mike, see you around!

--RS

Turboz1r · May 11, 2012

Thanks for the welcome guys. Any ideas on the tire mounting question.

Mike G

Joseph Houss · May 11, 2012

Jersey is a big place!

Where are you located? Monmouth County?

You can give Darren Buhler at Buhler Dodge a call, and he may be able to do it at his shop, or possibly point you in the right direction.... and there's always Nick M at Modern Performance, in Oceanport. He has plenty of experience with Vipers as well.

Further North?

Warnock Dodge

tim721 · May 11, 2012

Sorry to hijack your thread again Mike....anyone going to C&C tomorrow?

I can't post in the other section...email me if so [email protected]

if you're set on going to a dealer Warnock would be my pick

Turboz1r · May 11, 2012

Hi Joe,

I live in Somerset County in the Bridgewater/Somerville area. I was wondering if most Dodge Dealerships have a machine that will mount Viper size tires or will they outsorce to a tire store even if you bring them the tires. I have found a performance shop in Somerville that has a machine big enough to mount the tires, and he does a lot of wide tires on race car rims. The only thing that worries me is he said if the tire ripped while mounting, it was on me and not him.

Thanks again for the replies.
Mike G

Flash Gordon · May 11, 2012

EuroTire in Fairfield, NJ (Route 10 East). Has the proper equipment and never a scuff, scratch etc. to rims when mounting. He does a lot of PCA stuff and has also mounted tires for my Viper. Was mounting a set of GT3 rears when I was there last. Those aren't skinny!

v10enomous · May 11, 2012

I think Warnock is now Nielsen.

http://www.nielsendodge.com/index.htm

v10enomous · May 11, 2012

Flash Gordon said:
EuroTire in Fairfield, NJ (Route 10 East). Has the proper equipment and never a scuff, scratch etc. to rims when mounting. He does a lot of PCA stuff and has also mounted tires for my Viper. Was mounting a set of GT3 rears when I was there last. Those aren't skinny!

10 east or 46 east Flash ? I went to Sparta tire and it was a nightmare... Great price though just bring your own 2x4's :lmao:

VIPERUSA · May 11, 2012

v10enomous said:
I think Warnock is now Nielsen.

http://www.nielsendodge.com/index.htm

,,,,,,,yep,,,,,

Flash Gordon · May 12, 2012

v10enomous said:
10 east or 46 east Flash ? I went to Sparta tire and it was a nightmare... Great price though just bring your own 2x4's

Oh yeah... frig.. meant 46 East... A few more highways over here, as compared to rural Sparta...

Need info in NJ

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Former VCA National President

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Enthusiast

Similar threads

Forum statistics

Share this page