Gen2 Line Lock pics please.....

moparracing

Enthusiast
Joined
Jan 16, 2009
Posts
354
Reaction score
0
Location
Battle Ground, Wa
I'm getting ready to put line lock on my GTS & would like pictures on where you have mounted your line lock solenoid under the hood & where you put your switch inside the car. I've searched the previous threads, either don't exist or the pics are "X" out. Any other advise or pitfalls to watch for would be appreciated, thanks in advance!

my parts so far:

http://www.summitracing.com/parts/HUU-1745000/?rtype=10

http://www.summitracing.com/parts/HUU-5671510/?rtype=10

http://www.radioshack.com/product/index.jsp?productId=2102781

http://www.radioshack.com/product/i...gle+switch&kw=toggle+switch&parentPage=search
 
Last edited:

BlackSnake99

Enthusiast
Joined
Aug 8, 2009
Posts
1,610
Reaction score
0
Location
Northern Virginia
You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 
OP
OP
M

moparracing

Enthusiast
Joined
Jan 16, 2009
Posts
354
Reaction score
0
Location
Battle Ground, Wa
I've used that toggle switch on my viper truck's line lock, worked great...... besides, my shifter is lowered & no room for the setup you used.
 

SHELBYVIPER

Enthusiast
Joined
Feb 22, 2006
Posts
171
Reaction score
3
Location
Cleveland, Ohio
Here are a couple pics of my line loc install. The solenoid mount was custom fabricated. I purchased a seperate ashtray for the switch mount. The actuator light was also fabricated to mount in the cigarette socket. There was no drilling or cutting done on the car. I have a similar set up that I will be listing soon in the classifieds.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
OP
OP
M

moparracing

Enthusiast
Joined
Jan 16, 2009
Posts
354
Reaction score
0
Location
Battle Ground, Wa
Above are two different examples of how to hook up the line lock solenoid - either on the input or output of the distribution block..... Does anyone see a disadvantage to either setup to braking or to the use of the line lock?
 
Top