Tom Welch
Enthusiast
Finished the Nitrous Injection Install on my 2013 GTS tonight. Designed a simple setup that doesn't depend on or pass through or utilize any of the onboard ECU facilities. Hopefully this will eliminate interference with SOME of the engine management software built into the ECU. Out on the street with small jets and only 700 PSI of Nitrous pressure I was surprised by the instant and strong pulling power it made all the way through 3rd and 4th gear. 1st and 2nd gears were unusable even with the traction control ON.......lol. The stock Viper pulls like a horse, but this thing pulls like a Clydesdale now.....
The stock spark plugs looked fine, but I will be trying to source a few ranges cooler before cranking the power up considerably.
Have a dyno appointment for it this coming Friday Morning but the weather may be iffy....which means I won't get another try until the first week of November as I am traveling
Here's a pic of the nozzle assembly installed.
If the system works good and you folks have any interest, I will put together pricing. The current set-up on my Viper is not using Propane, but I do plan on testing that should this current set-up test successfully. Could turn out to be a clean and inexpensive power adder while you're waiting for the forced air community to perfect systems and electronic interface for these new Vipers.
The stock spark plugs looked fine, but I will be trying to source a few ranges cooler before cranking the power up considerably.
Have a dyno appointment for it this coming Friday Morning but the weather may be iffy....which means I won't get another try until the first week of November as I am traveling
You must be registered for see images attach
out of the country on business from the 19th. I will do my best to get it on the dyno Friday and post the results here. Here's a pic of the nozzle assembly installed.
You must be registered for see images attach
If the system works good and you folks have any interest, I will put together pricing. The current set-up on my Viper is not using Propane, but I do plan on testing that should this current set-up test successfully. Could turn out to be a clean and inexpensive power adder while you're waiting for the forced air community to perfect systems and electronic interface for these new Vipers.
Attachments
Last edited:
