2easy
Enthusiast
Hey Gents,
Been a while for me on here as im just coming out of hibernation here, anyway, I hope everyone is safe and all families well.
I need some help. Im getting the Mistress (03) ready for this season and have her up on the hoist inspecting underside, oil change etc, and notice an oil leak at the pan gasket. (its the gasket and not the lines) So, I pull it apart, well, to be precise:
I drain the oil
remove the inspection cover
pull the bolts on the ac line
pull the four bolts from trans to oil pan
pull all remaining oil pan bolts
So the pan is loose at the front but secure at the rear....and I have pulled the three bolts up in the inspection area. No luck. Im using a pry bar gently but am worried im missing something and am gonna brake the pan or a bolt or pin or etc...Do I have to pull all the transmission bolts..well bell housing bolts to engine as well?
Thanks for any advise in advance.
Been a while for me on here as im just coming out of hibernation here, anyway, I hope everyone is safe and all families well.
I need some help. Im getting the Mistress (03) ready for this season and have her up on the hoist inspecting underside, oil change etc, and notice an oil leak at the pan gasket. (its the gasket and not the lines) So, I pull it apart, well, to be precise:
I drain the oil
remove the inspection cover
pull the bolts on the ac line
pull the four bolts from trans to oil pan
pull all remaining oil pan bolts
So the pan is loose at the front but secure at the rear....and I have pulled the three bolts up in the inspection area. No luck. Im using a pry bar gently but am worried im missing something and am gonna brake the pan or a bolt or pin or etc...Do I have to pull all the transmission bolts..well bell housing bolts to engine as well?
Thanks for any advise in advance.
