Racing harness for stock Generation 1 Viper

gobigblue42071

Enthusiast
Joined
Dec 26, 2014
Posts
4
Reaction score
0
I am looking for a 5 or 6 point racing harness yellow in color that will mount in a 1994 Viper RT/10. The car is stock and doesn't have a roll bar to mount it to. Any advice or suggestions would be much appreciated!
 

DrumrBoy

Enthusiast
Joined
Jul 21, 2003
Posts
2,612
Reaction score
0
Location
GA
I know this likely isn't helpful, but I've not seen a proper racing harness affixed to anything other than a rollcage element. It might be possible but you're going to have to find secure mounting points somewhere, otherwise the harness will be unsafe. No worries if its just for show.
 

MoparMap

VCA National President
VCA Officer
Joined
Jan 7, 2013
Posts
2,439
Reaction score
273
Location
Kansas
I was pretty sure the factory has hard points built into the car already for harness similar to the later generations. I know my mom's 94 has a crotch strap hole already in the floor directly in front of the seat, but I think to get to the shoulder ones you actually had to remove the plastic panel behind the seats and cut it up. The later gens have the removable panels to access the holes, but I don't think the earlier cars had any provisions like that.
 

FrankBarba

Enthusiast
Joined
Oct 2, 2000
Posts
3,285
Reaction score
3
Yes it can be done. You will have to remove items that you most likely do not want to remove & hack up.
It will change the look of your interior.
 

jp

Enthusiast
Joined
Oct 4, 2000
Posts
711
Reaction score
0
Location
Umea, Sweden.
There is two welded bolt threads behind your neck, but you have to remove the panel and replace it with a aftermarket piece with holes for the shoulder straps.
Below the seat you have one anchor point for the fifth point of the seat belt.
 

steve e

Enthusiast
Joined
Oct 23, 1995
Posts
988
Reaction score
59
Didn't the ACR come with 460hp vs GTS 450?
Yes, same engine, in the ACR they replaced the accordion type hose that went from the air box to the throttle body,with a smooth hose and a K&N filter, presto, 10 more hp.:)
 

Members online

Forum statistics

Threads
153,143
Posts
1,681,575
Members
17,643
Latest member
thiagets
Top