Car would'nt start. ASD fuse or relay?

Wildman

Enthusiast
Joined
Mar 29, 2015
Posts
1
Reaction score
0
I've had my 2005 viper for 4 weeks now. I was driving yesterday and going real slow around nieghborhoods at low rpm for about an hour. Car never got hot, but then just quit as I was coming to a stop sign. It was just like the key was turned off! Dash would power up and so would fuel guage, but not the other guages. I was there 3 hours and then spent $200 to get towed home 45 miles away. We backed it off the tow truck and it started right up. I checked all the fuses before being towed and they all seemed good. I read about the ASD fuse, but now the cars starts fine. I changed it anyway. Should I change the bigger ASD fuse too? Or is there something else I need to look at? I've read most of the other threads on this subject. Will putting the car on a computer show anything if it runs fine now?
 

Wiretech

Enthusiast
Joined
May 22, 2011
Posts
325
Reaction score
0
Location
Toronto Ont
The ASD fuse should stay at 25A this circuit feeds the PCM and the ASD relay will feed other circuits on the same fuse such as injectors ,coil pack, and the O2 sensors check the wires near the exhaust first ,you should carry extras fuses and a test light for the near future, good luck.
 
Top