Search results

  1. F

    New OEM Viper Seats (Have Question).

    Just acquired a set of what I was told, new Viper seats. They do smell and look new. The only issue that I have is that they look like Gen 3-4 seats but the inner part material looks like Gen 5. Any suggestions, I would like to sell these. Thanks, Frank
  2. F

    jack stands

    This works so much better !!!!! Use the regular jacking points on the Gen 3. Then place the jack under each hub using the adapter .
  3. F

    AB Quality Wires Gen 3 Plug Wires High Temp for sale

    Have one set of AB Quality Wires High Temp for the Gen 3 Viper for sale. $225.00 shipping included except Alaska and Hawaii. Please text me at 321-482-7348 or [email protected] Thank you, Frank
  4. F

    Recommend competent mechanic in Jacksonville/St Aug area of Florida?

    For what is worth. Fields Dodge Chrysler in Orlando has an excellent Viper and Prowler tech. He works on most of the racing Vipers in Orlando. Alex Macevicious. 407-878-7710
  5. F

    Gen III Manual Transmission Fluid Change

    I changed the Manual Transmission Fluid on my 2005. First time using AMSOIL Synthetic SAE 75W90 API GL-4 Shifting is smoother. Nice surprise !!!! Fill Plug 20 ft/lbs Drain Plug 28 ft/lbs
  6. F

    Noise from the rear end in SRT 10

    A lot of people like to make a big deal regarding the grinding noise coming from the differential during a slow sharp turn. Change the differential fluid and additive. That is all you need to do. It is that simple. I just did my 2005. It had the noise and grinding big time. I just changed the...
  7. F

    The "mileage question"

    When they are driven they need to do at least 6 miles to warm up the oil and fluids and evaporate the water condensation that appears at start up. Let engine run for at least 20 minutes. My 2005 had 3800 miles when I bought it 3 years ago. No issues
  8. F

    Tire Life per Michelin

    TIRE LIFE While most tires will need replacement before they achieve 10 years, it is recommended that any tires in service 10 years or more from the date of manufacture, including spare tires, be replaced with new tires as a precaution even if such tires appear serviceable and even if they have...
  9. F

    New Old Stock Tires. Safe?

    TIRE LIFE While most tires will need replacement before they achieve 10 years, it is recommended that any tires in service 10 years or more from the date of manufacture, including spare tires, be replaced with new tires as a precaution even if such tires appear serviceable and even if they have...
  10. F

    New Old Stock Tires. Safe?

    Tires are good for 10 years. Per Michelin After that, you are on your own.
  11. F

    Gen 2 Driveshaft Yoke

    MoparPartsGiant.com $71.00
  12. F

    Removal of Shifter Gen 3

    Just some info on the removal of the shifter. 1. Remove Ring 2. Lift leather Boot 3. Index(mark) shifter nut. Easier to re-install in correct alignment. 4. Loosen shifter nut. 16mm and 19mm 5. Remove Shifter and Boot Reverse for installation. Torque nut to 30 LBS or tighten matching your...
  13. F

    Airbag Recall Replacement Incorrect Tales

    To remove the dash trim, no need to loosen steering wheel. 1. Remove plastic cover for turn signal and light switch, 2 screws( 1 minute). 2. Remove turn signal/light switch unit, 2 screws and 2 electrical plugs ( 1 minute). 3. Take dash bezel out.
  14. F

    Airbag Recall Replacement Incorrect Tales

    No disrespect to anyone. On my 2005 Gen 3 Viper, I just removed the airbag module and replaced it with the new one. I will post pictures and procedure in the near future. Here are some of the facts. 1. Steering wheel does not have to be removed, loosen or messed with at all. It is nowhere near...
  15. F

    Looking for a Tonneau Cover for a 2008 Viper.

    We have found one. Thank you all !
  16. F

    Console Shifter Bezel

    With my order they included a new $9.92 switch housing, part number 5093227AB. It is just an upgrade. Same number, just AA to AB The 2005 part number is 5093227AA
  17. F

    2004 2010 Interior Trim Applique Mopar 82209809

    Interior Trim Applique - Mopar (82209809) NIB Priced to sell $369.00 Shipping $15.00 Text 321 482 7348 [email protected]
  18. F

    Console Shifter Bezel

    Call: Chuck Edwards, tell him you talked to Frank from Florida. He will do good . moparsalesdirect.com 517-266-5931 direct line I just met Chuck and he has been very helpful. They got my business for sure !
  19. F

    OCR module recall info please

    You need to read, https://www.viperclub.org/vca/threads/airbag-module-recall.676657/
  20. F

    Looking for a Tonneau Cover for a 2008 Viper.

    Looking for a Tonneau Cover for a 2008 Viper. Text me at 321 482 7348 [email protected] Thank you, Frank
  21. F

    Console Shifter Bezel

    Answer to my question regarding the Console Shifter Bezel. Just got of the telephone with Mopar Sales Direct. Was told that there is a bulletin that if the Gen 3 part number 1CH38VRAA is needed to use the Gen 4 part number 1CH38DX9AB. Therefore, same part. By the way, power window switch...
  22. F

    Console Shifter Bezel

    Are the Console Shifter Bezel for the Gen 3 and Gen 4 Viper the same. Part numbers are different. Gen 3 shows as discontinued. Gen 4 available. Gen 4 shows as not compatible with Gen 3. But the Carbon Fiber Bezel kit is good for 2003 to 2010 Vipers. 2005 - 2010 Dodge Viper SRT10 Carbon Fiber...

Members online

Forum statistics

Threads
152,026
Posts
1,673,868
Members
16,310
Latest member
Smokengun
Top