Separate names with a comma.
I say you'd be ok if scratches cant be "felt". Unless it has been wetsanded previously. Without a gauge, be hard to tell.
Start light, maybe...
WAAAAY too long of a story. Enjoy the car and the people.
One owner fully documented only 2k miles viper gts 100% original dodge srt-10
are the kumho ecsta xs no longer available? that was a great option
definitely go with OEM part on sensor. Call Tator.
Not difficult. There are 4 or 5 A/M options I think. Ceramic, stainless, etc.
Have you had any battery problems of late? You may need to look into your timing controller, as you call it. do you have ability to read data...
coil packs? plugs? cam position sensor?
throttle bodies out of sync? just a guess
Brake fluid looks a bit dark for 200 miles too. :dunno:
don't forget to consider your tire size/diameter too. (if not stock)
That is the original PS. Not sure they make that anymore in that size. :dunno:
could be alternator bearings going out too. got a stethoscope?, a hose or something you could put your ear up to to pinpoint it?
yes. spin it by hand and look for any movement of the rim edge while looking at the bottom focusing on one area. That should at least give you an...
Same tires I have. Good for spirited bursts on the street and confident in the rain. Terrible on the strip. Couldn't imagine autox.
Are you sure...
any info on the tire? brand? warranty? manufacture defect?
why is it "out of round" ? how bad? tried repositioning it on the wheel?
Has it been...
I think it runs after cut off too, but not sure how that is controlled (SCT, timer, temp sensor, etc)
Tony is the man for sure. If he still does injector cleanings, I think he'll give you instructions on how to mark them, the do's/don'ts etc....
There have been SOOOOOOOO many threads on tire psi, but not one that I can think of regarding tire pressure gauges.
That being said, if you're...
my guess is 29 psi.
No. Not that I'm aware of.
pretty much unlimited. keep in mind if you go much larger/taller, i.e.19"- 21"," you will be affecting your final gear ratio to.
would you mind cleaning them first? :D
Sounds like a good deal to me.
Rub a small amount in inconspicuous spot if you can. if it turns black fairly quick, there's no clear coat. No black residue? they still have...
I tried everything with my B & B's. Final solution was to take apart, sand/scuff tube ends where they slip together and reassemble. Once apart,...