Going to add EGTs and log the temperatures of each cylinder. I have searched but so far the only solutions I found are for 8-cylinder (or less) engines.
I have the EGTs (bought from AEM)
What I need is ten channels of thermocouple (K type) amplifier with ten 0-5v outputs. Preferably as...
From the AEM 30-1500 EMS manual:
The Viper idle air control motor is sometimes susceptible to drift and/or sticking. If your idle control hangs abnormally high or low during operation, turn the key to the ON position and wait approximately 10 seconds before starting. The EMS will reset the idle...
Btw, you can discard the fact that it's AEM electronics (if that's whats holding you back:)). Since it's plug and play the connectors are exactly the same as a stock ECU.
No one with experience of working with the engine electronics that can offer any advice?
I already posted this over at the AEM forums but nobody answered my question so I though I would try my luck here :)
We have a AEM EMS 30-1500 (pnp) that I'm going to install.
Can anyone tell me which pins on the 30-1500 that I need to connect to +12 and which needs to be connected to...