Separate names with a comma.
Can anyone post pics of where the hood silencer pad earth straps connect to? Gen4 Ta Sam ALL SORTED NOW.....
Have made these for my ACR, could not abide stone chips, its an easy build. Draw the template by holding a piece of card in the well and draw...
Got mine... http://clothingmonster.com/en/reptile/24-red-mamba-face.html
I cannot stand the raised edge on my Gen 4 ACR drivers stripe, feels terrible, so... Im having the whole car flatted off, and re-lacqured, flatted...
Took mine off to clean up, the heaviest part of it was the pint of water that emptied out when I took off the end cap must be for survival...
Dodge Viper SRT-10 Coupe & Convertible 2009 Factory Service Manual CD Anybody got one they dont need anymore that they could sell me?...
Had a day out today https://www.dropbox.com/s/4td4ix91rloxcop/RECO0008.MOV
After changing all my valve springs, sorting the catchcan oil problem, Im proud to report that my Vip is running uber perfect here are a few...
My brain is getting frazzled here, the normal ccv is done by; passenger side valve cover to airbox, to let in fresh air, the drivers side valve...
When do you check the oil, when cold or hot? if hot, do you fill just to the bottom of the safe level?
Well, after the case of the exploding valve springs, I changed the lot, changed the valve seals, one pissed pushrod, bolted the rockers back on...
I need to change the 30 bolts that fix my rockers to the rails, they are 12 point bolts, they seem to have gone a bit brittle, 2 snapped off when...
Well. change all my springs today, this is what I found!!!! Car drove fine, HOW can this be possible?
Looking for something in the picture below, which is for an LS engine, does anyone here have this tool kow the measurement between the 2 holes?...
Big up to RSi, They identified the valve springs for my 2004 built engine, supplied and sent them to me in the UK ordered Wednesday arrived...
Is there any way to identify the valve springs, I got a broken one, but my engine build sheet just says heavy duty valve springs, going to change...
heavy duty spring failure....
My box arrived [ATTACH]
http://www.barryboys.co.uk/phpBB2/viewtopic.php?f=1&t=33000 Look at the car, and read the posts, there are some real know nots here!
looks like mine is almost ready..
Just got my Replica Monroney label for my 2004 SRT from pattymelt Superbly made. Would not hesitate to recommend him sam
Catch can help please Ok, I have 2 outlets on the rear of my 2 valve covers, the left bank pipe goes directly to the catch can, the right bank...
Put too much oil in the motor, got a big waft of smoke and the oil got chucked back out through the inlet and out of my air filters, I didnt do...
Just changed my Battery to an Odyssey 1500, Jesus, the thing turns over so quick now, what a great battery ODYSSEY PC1500DT 12V 1500...
Just putting my inlet manifold back on and 2 of the bolt threads are gone, any quick fix, or do i need to helicoil them?
