I want to fit a new crankshaft seal. There are two different brands: the one from National = 710698 and the one from Mopar = 5037300AA. Rockauto offers both. Do you know if there is a real quality difference or maybe National is the manufacturer and sells it to Mopar?
Thank you and best...
I know that the service manual only states "Refer to the A/C Underhood Specification Label located in the engine compartment", but my Viper has a 2008 hood and I cannot check the label on my original hood. So please make a picture of the label and tell me the capacity.
I hope you...
I need to know the capacity of the R134a AC gas in a 3rd gen. Viper SRT10 from 2004.
I know that the service manual only states "Refer to the A/C Underhood Specification Label located in the engine compartment", but my Viper has a 2008 hood and I cannot check the label on my original...
ATF+4 is thinner than the 75W-85 = therefore Tremec filled their T56 gearbox with ATF, but NOT for the Viper's. This engine has much more torque and it is NOT limited electronically like on DSG or other modern gearboxes. On cars with a supercharger or Turbo even more, so it could...
I have a 2004 Viper SRT10 with stock Tremec T56, but with a lot of other modifications like Paxton etc..
Dodge is now here in Spain represented by Fiat and I asked them about the transmission oil and they told me ATF4. But my owner's manual says that I should use a synthetic 75W-85 oil...
I have searched this information before in the parts catalogue, but I get no exact information. Does my 2004 Viper need for the front + rear suspension in total 4 x lower ball joint seal part number 52006404 and 4 x upper ball joint seal part number 52006405?
Thank you and best regards...
what do you think about the Rim Ringz:
I would like to try to fit them to see if I like the look, but will they damage the tire?
Does anyone of you know these Rim Ringz?
Thank you and best regards from Valencia
here in Europe, specially in Germany the OPTIMAL Wheel bearings have a very bad reputation = the parts are of very low quality.
Finally would you recommend to buy the separate bearings and fix them together with a "press" or compactor or better go for the original Dodge part that...
concerning the front wheel bearing hub 04763182AB there are extreme price diffferences between the original part or for example OPTIMAL 991672.
I just have called the Fiat dealer here in Valencia and the two different part numbers that appear on the parts manual are 05093041AA and 05093042AA, but the dealer does NOT identify them!!!
Maybe for you in USA this seams a absurd problema, but I just want to avoid that it is a...
please show me a pic of the bulb for the volt meter gauge. I have seen in the manual that all 4 gauges should use bulb 103, but how does bulb 103 look like? Google images shows so many different bulbs that I am totally confused....
Regards from sunny Valencia (Spain)...
when you say that you have used both, do you mean that you know the one I asked about?
I would like to call you, but I do NOT have your phone number... Please give it to me - thank you
does really nobody have experience with this tool? Or maybe you could ask or get more details about it over there in USA where a Dosge is a well known and famous car brand.
Please imagine for a while what it means that it is simply impossible to find the original DRBIII diagnostic...
Hello from Valencia, Spain,
I need for my 2004 Viper SRT10 a DRBIII diagstostic tool like Dodge dealers in USA use.
But here in Spain since Dodge belongs to FIAT the oficial Fiat dealers do NOT have the DRBIII = impossible to get here!!!
I am having problems with my PCM or maybe BCM and need...
my problem is that my SRT10 is a 2004 european version. This means that I cannot activate the battery save mode, after activating it the doors are never closed. Unfortunately my car does NOT keep longer than 3 weeks with a fresh battery. The BCM or similar must begin to consume energy...
who has installed a battery disconnecting switch that can be activated from the outside like the attached pic?
Or maybe better in front of the car under or near the hood release?
Thank you and best regards from Valencia, Spain
I live in 46001 Valencia, Spain, therefore I need to know from you the shipping cost. Please get quotes with USPS and also with UPS or FedEx. I am really very interested in this suspensión kit. If you want, I will call you. Just tell me where you live in USA to know the time there...
I am searching for mt SRT10 Convertible side emblems with the Word "supercharged", "supercharger" or "Paxton".
Do you have any idea of where I could order them - no problem if in the USA.
Please add a picture if you already have similar side emblems fitted to your car.
I have tested all again and again and my car (2004 model) does NOT lock the door with the battery save mode on. During the save mode the security flash on the windscreen does NOT flash = a sign of alarm mode switched off.
NOW I have tested the following: after the battery save...
thank you guys for the answers, but like I already said, if I make: 1. Cycle the key TOWARDS you (backwards) and back to off 4 times.
2. Hit the "lock" button on the door up - the car will chirp. 3. Get out, close the door.
Then the driver's door will never be locked. Even after...
I have activated in my 2004 Viper SRT10 the battery save option by doing exactly what the manual describes. But after 45 seconds you still can open the driver's door if you want = not good at all if your car is together with more cars where more people have access to the garage. I need...
I need the diameter of the muffler body like the attached pic. The question is if Borla is thicker than Corsa. I muffler with a smaller diameter can be protected better with a heat shield, because then you have more air between the muffler and the heat shield. Therefore my...