Search results

  1. N

    PO441 Pending & PO443 Codes

    The P0441 is a purge flow issue. The PCM detects incorrect purge vapor flow. The P0443 indicates an electrical problem in the purge valve control circuit. It could be a faulty purge valve, wire issue, or PCM.
  2. N

    MAF sensor connector

    You might be able to search on mouser.com with those numbers on the body of the connector. I can't see the numbers clearly otherwise I would check it for you.
  3. N

    MAF sensor connector

    This is the MOPAR part number(5013979AC) for the MAF connectors. They are not cheap. But you may be able to find a number on the old connector and search on mouser.com. They may have the connector body and terminals.
  4. N

    O2 sensor help

    I can send the factory diagnostic test procedures to you.
  5. N

    Intro and Parking Brake Assembly

    If you are mechanically inclined you can remove the parking brake lever assembly. There is a spring-loaded locking lever, on the bottom, that becomes seized. It can cause cause the issue you described. Check that first before you replace the parking brake lever assembly. Phil
  6. N

    DRB III Reverse Engineering Project

    I think I still have that Master Tech booklet. I appreciate the update on this post. It would be great if the inclinometers could be used with the Enhanced DRB3 Emulator. Eventually my DRB3 will fail and I will need to have an alternate method for checking caster angles. I had no idea the...
  7. N

    SRT Chat HERE on September 17th!

    Is it possible to retrofit the 08 radiator cooling fans onto the 03-06 vipers? If so, will it involve more than just removing the hydraulic fan parts and installing the electric fans and shroud? Will the 03-06 air cleaner assembly interfere with the retrofit? Is there a way to have the factory...
  8. N

    Tachometer Signal Input For Datalogging

    http://fjoracing.com/index.php http://racepak.com/
  9. N

    Tachometer Signal Input For Datalogging

    I am installing an FJO Racing wideband AFR system and a Racepak GPS data aquisition setup. They are going into an 04 SRT Viper. Where is a convenient place to connect the Tach inputs? Has anyone else put these setups in their cars? And if so, are there any installation tips anyone can give...
  10. N

    When Will a Gen III Coupe be Available? I Want One Now!

    Re: When Will a Gen III Coupe be Available? I Want One Now! The PVO rep. said that he would not comment on whether or not there would be a Gen III coupe produced. Several people at the Viper dinner in Las Vegas last month were asking him. You have to know they will produce it....
  11. N

    Available Viper - Graduating College - Uh oh!!!...lol

    Re: Avail-Viper....WHAT THE HE-LL!!! That Viper shows up as originally being red from the factory. No factory warranty whatsoever. Aftermarket warranty contracts-I don't know...
  12. N

    Question for all you viper tech guys about a Roe SC

    I sent an Email to Roeracing and this is the reply as to your issue. Even though you already removed it. Future reference for others who want to remove their's in the future. "If you have a kit newer than February, there should be two threaded 1/4"-20 bolt holes near the front of the top plate...
  13. N

    Available Viper - Graduating College - Uh oh!!!...lol

    Re: Avail-Viper....WHAT THE HE-LL!!! I checked through the Dodge dealer computer system and that Viper had a complete warranty restriction placed on it. Just wanted to add my info.

Latest posts

Members online

Total: 1,872 (members: 12, guests: 1,860)

Forum statistics

Threads
154,323
Posts
1,690,171
Members
19,026
Latest member
rowland2004

Share this page

Top