Search results

  1. R

    Solutions for Rear Tires Rubbing Fenders?

    Originally put the Eibach lowering springs on my 02 RT10 with low profile "25" series tires (PRosso 355/25-19s) and had no fender rub with my 19" CCW wheels. The CCWs have additional outboard displacement. The "25" series tires are no longer made and I had to go with a "30" series...
  2. R

    What lifters did you use in your engine build?

    I'm very curious which lifters you all used in your heads/cam build, and what has been your experience with them?
  3. R

    Need Suggestions for New Radiator

    My 02 RT with 37k miles needs a new radiator due to corrosion and leakage. I would appreciate any suggestions for a quality replacement. Thanks!
  4. R

    Engine Light Code P 1391- Cam or Crank Position

    Just got a P 1391 code today after driving my 02 RT. A couple of months ago I had heads and cam installed. Reused the position sensors and used a Cloyes assembly. However, in doing a search I noticed a few years ago that Greg B got the code just after washing his car, and apparently got water in...
  5. R

    Creampuff Transformation - Greg Good Implants

    The 02 creampuff turned into a snarling B#*@!... Stock 410 hp... With Greg's heads and cam, plus AR headers, Borla catback, DC lifters, Mopar T&Ds, the car went to 551whp and 581 wtq. Picked up 140 hp. That's with stock air box, stock throttle bodies, unported manifold, with cats, on a...
  6. R

    Mopar Shaft Mounted Rockers ?

    Does anyone know anything about the Mopar shaft mounted rockers? I found them on Viper Parts of America, and they appear to be alternative to the T&Ds and Jesels. Wonder who makes them for Mopar? They are priced similarly to the T&Ds which will not be available until mid-January. Not sure if...
  7. R

    AR Racing Step Headers with GG Heads and Cam

    Has anyone had any experience or knowledge about the AR 1 5/8 to 1 3/4 step headers? Supposed to provide more torque at low to mid range. This will be for an 02 rt that will have Greg Good heads and cam, Also, Nick from AR said that he has seen that with this configuration, a 3" cat back does...
  8. R

    Best Practice for Installing Cam

    Any thoughts on the best practice for instralling a cam in an 02 RT? I've heard of removing the entire engine, disconnecting the trans mount and tilting the engine upward, etc. What is the safest, easiest, and most reliable way to do this? Thanks.
  9. R

    Car Show, Torqspeedlab, Miramar Florida

    Would be real nice to see some vipers show up.....Miramar Florida. I don't see too many vipers around here except a silver GTS that has rumbled thru my development and a beautiful red GTS with stripes that I've seen on Miramar Pkwy a couple of times. They have a pretty big flyer out...the...
  10. R

    02 RT/10 Air Intake Performance

    I'm wondering what others have experienced with air restriction on the OEM NACA port with the stock intake box. I have the stock system with K&N's and smooth tubes. How beneficial in hp gains is it to go with an aftermarket system that draws air from under the hood with a heads and cam mod...
  11. R

    Fuel Requirement for Head/Cam Mod

    Another question about my heads/cam mod on my 02 RT: Expecting in the upper 500 whp. Are the stock injectors and fuel pump adequate with the proper tuning? Thanks.
  12. R

    Shaft Mounted Rockers or Not?

    I'm doing greg good heads and cam with headers and catback on an 02 rt. I'm expecting upper 500 hp at the wheels. Would non-shaft 1,7 rockers such a harland sharp be sufficient or should I go with the shaft mounted T&Ds? Any thoughts or experience would be appreciated.
  13. R

    Need Header Recommendations

    I'm modding my 02 RT with Greg Good heads and cam and will do a full exhaust. Any opinions as to the most reliable and powerful headers to use? Thanks!
  14. R

    Friend Rolls His RT/10 Twice Over Embankment

    My friend called me to tell me that he rolled his 2000 RT twice on wet pavement. The hard top was on and did not come off, but the front windshield structure completely collapsed. They had to cut him out of the car. The interesting thing is that he said the roll bar saved him, as it did not...
  15. R

    708 Cam Install Question

    Anyone install a 708 cam on a 00, 01, or 02 and retained the "stock" lifters? Any issues or comments? Would the idle be not as rough with the stock lifters? I'd like to get the idle sound of my 97 in my 02 without changing the lifters. Thanks.
  16. R

    Tire Size Question - 275/35x19 Pilots on Front

    Anyone have experience or information on using a 275/35x19 Pilot Sport on the front of an Eibach lowered GenII? The diameter is 26.5" versus the stock 25.7", and the car is lowered. I was told there is a possibility for interference. Thanks.
  17. R

    Alarm System Slow When Car is Hot

    When my 02 RT is hot, the alarm is difficult to activate and the horn sounds weak. I have to get very close to the car to activate and may need several attempts. Likewise to disarm. When the car is cold, the arming is stronger and can be activated thru walls etc., and the horn is much stronger...
  18. R

    02 RT Hard Top Front Latches

    The front latches on my hard top have become loose. Seems like they need to be replaced. Anyone have this problem?
  19. R

    97 GTS Vs. 02 RT/10

    I would like to have some opinions on the following: 1) I had a 97 GTS with just a 3" catback and no cats. 2) I now have an 02 RT with high flow cats and stock exhaust system. Not much difference between the two.......the 97 had more cam duration overlap, but basically the two engines should...
  20. R

    Eibach Spring Problems?

    Today I took my Cobra to Steeda in Pompano Beach to check the front wheel alignment. They aligned my car after I lowered it with the Eibach Pro kit about one year ago. Last week, I noticed that the passenger front tire was wearing poorly on the inside. The conclusion was that the springs...
  21. R

    Pain in the Ass

    Posting here is the biggest pain in the ass imaginabe.
  22. R

    News,,,,Enzo and Viper

    First the pleasant news: Then the Bad. I'm leaving downtown Miami today about 1 pm.....going north on I-95. I look in my mirrow and see a yellow Enzo whip in behind me. I was surprised to see this car behind me. Very surprised. I could see he was going to pass, so I rolled down my window to...
  23. R

    Gell Cell Battery Questions

    I thought I saw something on this forum at one time, but my searches came up empty. Anyone have any info on gell cell batteries as replacements for the stock lead acid batteries? The battery on my 02 RT was replaced when the car was new, but the replacement also is leaking, and the fluids...
  24. R

    Ford Cobra Concept

    I did some searching and did not see anything on the new Shelby Ford Cobra Concept car. Has anyone seen Motor Trend's March issue? Forget the Ford GT. If you have not, check out the Cobra Concept on page 59. This is like Viper all over again in 1992. They need to design a top and windows for...
  25. R

    Ford GT Vs. Dodge Viper - Motor Trend

    Anyone see the comparison in the January Motor Trend? Some quick info, Ford GT - Viper 0-60 ....3.6 - 3.9 1/4 mile.....11.78 - 11.77, with 124.31 - 123.63 60-0 ....111 ft. - 97 ft. 600 ft. slalom......71.5 - 70.4 weight ....3400 (est) - 3410 The only problem I had with this comparison, is...

Latest posts

Members online

Total: 696 (members: 10, guests: 686)

Forum statistics

Threads
153,188
Posts
1,681,842
Members
17,684
Latest member
Liberty235

Share this page

Top