I need some serious help with camber and pressures. I am getting a 30-40 degree temperature differential between the inside and outside of the tread. It should be 10 degree. Inside is hotter, indicating too much camber.
I was running at 42psi. I decided 42psi based on one thread, but after...
OK, I tried searching for Z06 and no matches came up. Not sure if that's too few letters?
Anyhow, I'm trying to find GOOD data showing how the C6 Z06 compares with a stock 06 coupe. Would be great to see the comparison showing from a roll, in a corner, on a track, etc.
I'm not doing this...
I picked up another car, and I think it uses the same size pads as the Viper :) Currently has some crappy compound that doesn't grip, would like to try out some different ones. I'd like to start from least aggressive before trying out my Mintex pads. EBC reds from the Viper don't work well...
I bought a lightly used set of Stoptech rotors from JonB (look new to me), but I'm not sure which go on the front/rear or left/right.
The hats look different... on one pair, they are almost flush with rotor disc while the other pair has a slight offset between rotor and hat. Which is front...
The piece covering the fog light access (access panel?) on my SRT is missing, does anyone know what the official name of the part is? I wonder if it's covered under the Maxcare warranty. If not, has anyone ever purchased it before?
Has anyone tried to align their own SRT before? Now that I'm tracking more often, I'd like to experiment with camber and toe settings. I've had it professionally aligned to:
Front:
-1.5 camber
5.5 caster
1/16 toe out
Rear:
-1.0 camber
1/8 toe in
I'd like to dial in another degree...
I haven't seen any available on Ebay or the classifieds. I know someone out there has to have a set lying around that they are too lazy to post :) Here's your chance! Please let me know what you have. I prefer 18's all around.
I'd rather save some cash and go the used route rather than...
I posted a few weeks ago about anyone with experience on the track using both sets of tires. YellowViperSRT10 was the only one who had, and he said they were comparable. I just bought an 06 coupe that came with a brand new set of Invo's, so the very thing I did was drive them a couple hundred...
I tried email JonB about some parts on June 30 and again on July 3rd. No response, I emailed [email protected].
Usually, I hear back pretty fast. Is there a new email address?
I've got wheels with new Invo's coming, and I plan on tracking (road course, not drag) my Viper as well as street-driving. How bad are the Invo's compared to the PS2's in terms of cornering, lap times, etc.?
Is it worth the trouble of unmounting the invo's, buying new ps2's and remounting...
After a recent driver's ed event, my friend's Viper started making a weird metal popping noise in tight turns (parking deck). We took off his wheels, and the rear parking brake pads were completely worn down.
Coincidence, or is it possible the track event contributed to this? Could this be...
I need to install this on my coupe, the skipshift is annoying. Is the part the same as that on the Gen II (61610)? For those who have installed it on their GenIII is the solenoid still on the driver's side of the transmission? Can you access it without removing the metal plate?
And for those...
I'm looking to put 18's on the back of my SRT coupe, if anyone has a spare set lying around (I recall somebody had a few sets machined) let me know and I'll help you clear out your garage. Otherwise, I'll order from JonB. Thanks!
By cheap, I mean around $1000-1500 for a set of wheels (18") with >50% R-compounds on them (Kumhos, Hoosiers, etc.). I don't care about the appearance, just need them to be straight and safe for track usage.
I've got the stock runflats on, and they are terrible. I thought about upgrading to...
Has anyone added a locking gas cap to their SRT coupe? What's the part number, and where did you buy from? Autozone lists 5907, but I want to make sure there isn't a clearance issue with the metal gas cap cover. I had one on my GTS, but couldn't find any talk of it on the SRT forums. I know...
I'm about to change brake fluid on mine and a buddy's 06 coupe. Since we're doing two cars, we'd like to speed up the process (especially since the track day is next week).
Is it possible to bleed the inner and outer bleed screws with the wheels on? With the car on jack stands? Not sure how...
For those of you who have replaced a steering wheel or ebrake handle, do you have a set of instructions you could post? Anyone willing to fax me the pages explaining the process from the service manual? I can do a writeup with pictures and put it in in the upgrades section if there's enough...
I'm sure I'm not the only who hates the blue steering wheel, shift knob and ebrake handle. I've already ordered another MGW shifter to replace the shifter, but does anyone have a black steering wheel or ebrake they'd like to get rid of? I saw a few on Ebay, but most seem prematurely worn. Thanks!
I'm thinking of getting an 08 style hood for my 06 blue/white coupe. Does anyone have any pics of these hoods with stripes painted (not necessarily blue/white). I wanted to see how the stripes looked compared with each other. I like the Vipair hood, but am concerned that stripes wouldn't look...
OK, so I talked to the mods and I can post my Ebay ad if I link the VCA classified ad along with it. Great opportunity for someone to pick up a great deal on a highly modified/low mileage blue/white GTS. I'm open to a trade for a 2006 SRT coupe. I've seen several from 3k -15k miles go for under...
Question:
I have 63 pound injectors. According to the VEC2 instructions, I should set the base fuel calibration to 30(GenII)/63 = 47%. However, my car currently has 55% on it (from a previous tune done by a well-respected tuner who shall remain nameless for now). I am throwing a "Bank...
First, many thanks to Sean Roe who has pretty much answered all of my questions within a few hours. I feel bad calling him on weekends, though, so I'll bother all of you instead :)
I just installed an LC-1 wideband sensor and an Autometer Boost Gauge (5776, electric gauge with analog output to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.