Search results

  1. V

    Tire opinion

    Has anyone driven with BFGoodrich g-Force T/A KDW front/rear? Considering purchasing the tires. Do not drive the Viper much with maybe the occasional autocross. Other than that it is a weekend cruiser. Opinions of the tire set? :eater: Thanks.:2tu:
  2. V

    Job offer

    A quick update on the job search front. I have a formal offer for a job. Bad news is we have to move to Buffalo. We are planning a trip up soon to look at the housing situation. Still have several other interviews going on, but all are out of state. Should have a final decision in a couple...
  3. V

    Buffalo owners

    I have a job interview in Buffalo tomorrow. I was wondering if anyone could let me know how many other Viper owners are located there? How many months of the year do you actually have available to drive the Viper? I have never lived remotely close to this area so I have no idea what to expect...
  4. V

    Problems with PS pulley removal

    I am doing the change out of the PS pulley and bracket. Bracket is on with no problems. I am doing it the "easy" way by not removing the pump. I have gone to two auto stores and rented the pullers. Neither stores pulley halves will fit the groove in the plastic pulley. They are too wide...
  5. V

    Keep missing 3-4 shift

    I keep missing the 3rd to 4th gear shift. This has happened most frequently when drag racing. With normal driving this does not happen. I have searched for information about shifters etc, but nothing was found specific to a 3-4 shift problem. I suspect it is one fo the following with the...
  6. V

    Question about the polish on CCW wheels

    I just got my SP600s installed on the car and was doing the usual cleaning/waxing. My question is to those that have CCW wheels, are the inside of each spoke polished? Not the rotor side of the spoke but the sides of the spoke that face each other? On mine they are not polished and in fact...
  7. V

    SP600 pics

    Does anyone have a pic of SP600 wheels on their car?
  8. V

    Bullet cam

    What brand do you use or would recommend? Have researched them all and can't decide. Reading forums about these just further confuse the issue since most seem to be ads for the cam rather than an honest assessment. Ebay has the lowest price for packages but concerned about true quality of...
  9. V

    Viper...Carfax available

    I have carfax for the next 30 days. If you have a Viper (or other car) you want a carfax on let me know. Hopefully since I used the word Viper several times this post will remain on the Viper RT10/GTS board. :2tu:
  10. V

    Yellow car/black wheels

    I am seriously considering buying some new wheels. I have a bumblebee with stock wheels now. If you have a pic of a side view of a yellow with black wheels, please post em. I did the tirerack thing and it looked good. I am considering the Speed Star Racing Type C-RS. Pic of those is in the...
  11. V

    PBJ Airbox and Catch can.

    Finally had time to clean up the car and get some pics of the Performance by Joe Airbox and Catch Can. I got the long version where it is open in the front to draw in more air. In the middle picture you can see where the intake temperature sensor now resides.
  12. V

    Camera mount

    Did a quick search, but still have a few questions. I am wanting to mount my camera in at 02 GTS. Has anyone used the Viper Innovations mount? If so what are your thoughts. I like the easy install however I don't like the final location of the camera. I suspect it is easy to modify the...
  13. V

    Dash Mats

    Those who own a dash mat, is the glare reduced or eliminated? If reduced do you see the mat rather than the dash? PS, Dave (RACECARS) as of this writing all your website links only go to your photos.
  14. V

    Stripped seat stud found

    To install the Roe Clutch linkage I removed the drivers seat. When I went to reinstall I found (confirmed) that one of the rear studs was completely stripped. I have chased both the nut and stud. Although the nut will now turn it will not hold any load since the major diameter of the stud is...
  15. V

    Roe Clutch Pedal Mod Kit

    Has anyone installed the Roe Clutch Pedal Mod kit? Any opinions? Also, did you do the gas pedal mod as well? TIA
  16. V

    Opinions on wheel upgrade

    In the next couple of months I am/will consider a wheel change. I am looking at the CCW wheels now. It seems that when most change wheels they also change from 18 to 19 inch. I have read comments that the 18 inch from CCW "look" small on the car. I am leaning towards keeping the 18 size for...
  17. V

    Made my own Sneaky Pete

    I made them in Red/Blue/Yellow shown plus I also have them in White so I can paint it any other color. Material is ABS. Size is about 3x3. Can actually make it any size I want. The blue did not come out well in the pic. Red is not as dark as I would have liked. This gives...
  18. V

    Parking brake assembly

    Has anyone changed out the rear parking brake assembly? I would like to dis-assemble and re-assemble the parking brake to transfer between different sets of rear calipers. The manual gives no information. I removed the 11mm nut but starting to having second thoughts. Any insight here would...
  19. V

    Problem with bleeding brakes..spongy pedal

    I'm in a quandry. I replaced all the brakes..pads, calipers, rotors I bought a pressure bleeder as well. Ok, I have run about 3 liters of fluid through the system with the pressure bleeder and have also manually bleed the brakes. What was interesting is that there were particles running...
  20. V

    Pressure Bleeders--psi?

    Those who use a pressure bleeder, what psi do you use when bleeding the system? The factory manual says to use according to the bleeder product recomendations, the Motive bleeder says to use according to the factory recommendations. Nice little circle here. TIA.
  21. V

    White Christmas

    Went to bed with wet weather and woke up to a White Christmas.. Nothing better than a blanket of snow on Christmas morning. Merry Christmas to all. :2tu:
  22. V

    My rant on the banjo fitting...a picture of the issue.

    Decided to take a pic of the situation before I removed the SS lines. This is the banjo fitting removed and placed back on the stock (black) caliper. As you can see this is without a doubt a fitment problem. As I remove the others I will check to see if any of the others are like this. What...
  23. V

    Extremely pissed off right now.

    Well, as a Christmas present to myself decide to add some bling to the car with Yellow calipers (same as stock just powdercoated), new pad/rotors. I also figured why not add the SS brake lines as well. Started this little project on Thursday. Well that last part was a stupid call. First...
  24. V

    Brake bleed

    During the Christmas holiday I am replacing my front and rear rotor/pads/calipers and installing SS brake lines. I have bled brakes before but not when I have replaced as much as I am this time. So when it is all buttoned up do I start the bleed/flush process at the RR then LR/RF/LF or do I...
  25. V

    brake bleeder recommendation.

    Does anyone have a recommendation for a brake bleeder that does not require shop air and is a one man operation? I have been looking at Griotts hand pump pneumatic version which seems pretty nice. Looking for something that is robust and easy to use. I currently do it the old fashion way...

Latest posts

Members online

Total: 378 (members: 5, guests: 373)

Forum statistics

Threads
153,193
Posts
1,681,880
Members
17,691
Latest member
prosperitymirra

Share this page

Top