Search results
-
P
Both windows making a loud sound when lowered
I went through this exact failure mode on my 2005, passenger side window. Smooth all the way down, or up, except at the very end, when it made a loud screeching noise. For me, it was the regulator that failed, right at the joint between the track and the white plastic sleeve (see the picture)...- Pleasanton Asp
- Post #2
- Forum: SRT10 and SRT10 Coupe Discussions
-
P
SOLVED: Passenger Side Window Only Goes Down Three Inches Then Stops
Wasn't sure the edit to my original post cycled through since I edited it, please see my edit.- Pleasanton Asp
- Post #5
- Forum: SRT10 and SRT10 Coupe Discussions
-
P
Help with power window
What year is your Viper @Ritroman ?- Pleasanton Asp
- Post #12
- Forum: Generation V Discussions / SRT Coupe, GTS, GTC, AC
-
P
Driver window
Thanks for that Diagram, but it's still not matching the actual colors found on the hardware. If I simply trial and error apply 12V to the different pin combos directly to the motor, do I risk messing up the the Hall Effect sensors if I put 12V through the pins not going to the motor? Here's...- Pleasanton Asp
- Post #12
- Forum: SRT10 and SRT10 Coupe Discussions
-
P
Driver window
Here is wiring coming off of my original equipment passenger side window regulator motor on my 2005 SRT-10. In a separate thread, I'm having an issue with a replacement regulator, and want to test it by putting a 12 volt DC input directly to it. I thought I'd practice first on the old...- Pleasanton Asp
- Post #10
- Forum: SRT10 and SRT10 Coupe Discussions
-
P
SOLVED: Passenger Side Window Only Goes Down Three Inches Then Stops
2005 SRT-10 With only 8,000 miles, I'm the original owner Here's the history of the issue: PASSENGER side window began making a screeching noise, so ordered a new Mopar regulator, suspecting the original was cracked. Had a reputable automotive glass shop install it about a month ago, and...- Pleasanton Asp
- Thread
- Replies: 4
- Forum: SRT10 and SRT10 Coupe Discussions
-
P
Need Switch plate for Pedal Adjustment Switch
Thank you so much for your help with this! Randy, I did go to the Mopar site, but I had trouble convincing myself that the switch would come with the bezel. I even sprung for a PDF download of the parts manual, but still couldn't come up with just the plastic bezel anywhere from a Mopar site...- Pleasanton Asp
- Post #4
- Forum: SRT10 and SRT10 Coupe Discussions
-
P
Need Switch plate for Pedal Adjustment Switch
The plastic bezel on the console of my 2005 SRT has broken off of the two screws that go through the pedal adjustment switch and into this same bezel. I have found the PN for the actual switch to be Part Number 56042387 but no where in the parts diagrams can I find this trim piece. Nor do I...- Pleasanton Asp
- Thread
- Replies: 5
- Forum: SRT10 and SRT10 Coupe Discussions
