Search results

  1. A

    Favorite Song or CD when cruising in your Viper?

    PANTERA- far beyond driven, and the great southern trendkill, albums
  2. A

    Attention ALL Ga. Vipers! Non-VCA members please read as well

    I'll be there early since I work a couple blocks from there. I'll be happy to make sure the staff and beer are up to my personal standards before you guy's arrive.
  3. A

    Opinions on rear end gearing options

    3.55 then you won't shift out of 2nd on most autocross courses. it is very streetable to.
  4. A

    For those that have low mileage Vipers, how do you do it?

    I have 86,000 and just got back to Atlanta after a 620 mile weekend run to Bristol VA. and back. that was rough.
  5. A

    Engine code Question

    <u>Probably</u> replace O2 sensor 2/1 (bank 2, upstream sensor). it is a slow response code during the cat monitor.
  6. A

    Blk/Red stripe Coupe...pics.

    SWEET.
  7. A

    ALMS at Road Atl and Speed GT Challenge Corral

    The race starts today. anybody going to be there thurs night?
  8. A

    ALMS at Road Atl and Speed GT Challenge Corral

    I sent a pm.
  9. A

    7K Mods = 384 RWHP, Need More, cam and head job next?

    Torque is measured and horsepower is calculated. Your torque/HP converted to SAE is about 460lb/ft and horsepower is about 416 if my math is correct. So IMHO you are about dead on for your mods. If my math is wrong I apologize.
  10. A

    7K Mods = 384 RWHP, Need More, cam and head job next?

    The only horsepower mods are the, vec, rockers, injectors,and exhaust. some may argue the smooth tubes. the rest is gravy. You should be able to tune a little more into it with the vec. but, not alot. what was your baseline?
  11. A

    Check Engine Light/Random Tech Cats/Optima Battery

    The flashing cel at key on, IIRC, means the OBD2 emmissions monitors have not run yet. probably because of the dead battery.
  12. A

    What do you guys all do for a living??

    shop foreman at a dodge dealer, also the viper tech.
  13. A

    What to do with painted gen1 wheels??? Opinions?

    I have never liked the gen1 wheels. Mine are chromed and still looked bad. they are a dated design. Which I did not like even when they were new.The very first thing I did ,even before I washed it, was replace them with some gen3's. Just my opinion.
  14. A

    New Unusual Headlamp Issue

    That was the complaint I have had. It may be another issue, probably multifunction switch or bcm.
  15. A

    New Unusual Headlamp Issue

    There is a recall on the 2003's for headlamps coming on and off. I have done a couple of flashes on the body controllers for this on 03's. Hope this helps.
  16. A

    ring and pinion question.

    I have a set of 3.73 gears laying around the mopar performance part # P5007022. the book says 96-2000. I called mopar performance and they were no help at all with my question. my question is: Will these gears work in 92-95 and if not, why not? Thanks in advance for any help you guy's may provide.
  17. A

    Looking for 3.55's

    Re: Looking for 3.55\'s In 2000 dodge went to 7/16 ring bolts from 3/8.
  18. A

    Best modifications for the money.....

    I agree with this, 3.73 gears feel like 50+ horsepower for @ $1000 installed. I disagree with the exhaust statement. To each his own.
  19. A

    autoform gen 1 hardtop and windows...

    Who's jeff and where can I find info on these products? TIA.
  20. A

    June 14, 2006 SRT Engineering Thread II

    Re: Why is the SRT engineering thread locked now? is the viper going to can bus? Sorry if this is to future.
  21. A

    June 14, 2006 SRT Engineering Thread II

    Re: Why is the SRT engineering thread locked now? good point.
  22. A

    June 14, 2006 SRT Engineering Thread II

    Re: Why is the SRT engineering thread locked now? how odd. thanks for your time srtengineers. thanks for not harming any animals during testing. ;)
  23. A

    June 14, 2006 SRT Engineering Thread

    I'm sorry, catalytic convertors. thanks again.
  24. A

    June 14, 2006 SRT Engineering Thread

    On the LX srt why no limited slip? Is it mainly because of "esp"? The LX has an open diff, but the BLD (brake locking differential) functions as the limited slip quite effectively. BLD is an algorythm of the ABS/Traction control system. You'll notice that the LX SRT8 lays two strips of...
  25. A

    June 14, 2006 SRT Engineering Thread

    Has anything been discovered as to why cat convertors are dying and then killing motors(overheating one side and seizing the rings) on the 04-05 models? I put it this way because it has been my experience cats don't die they are murdered, and if so what is the fix/problem? thanks I'm...

Latest posts

Members online

Total: 669 (members: 12, guests: 657)

Forum statistics

Threads
153,187
Posts
1,681,838
Members
17,683
Latest member
Dsalameh

Share this page

Top