Search results

  1. R

    Paxton questions

    Hi Guys, I’m back, owned a 1992 rt/10 and a 2005 convertible and I’m looking to buy a gen 3 coupe and put a blower on it (as soon as I’ve sold my nissan GT-R), couple of questions which I didn’t get answered through the search: -on the standard kit I understand it includes a piggy back and it...
  2. R

    where should the airco moisture seep out officially?

    Hi Guys, I have a question, with my 2005 SRT-10 convertible the moisture of the airco seeps out of a little hole in the frame, obviously made for this purpose, but should it seep along the frame on the bottemplate or should there be a little piece of hose sending this water to the ground...
  3. R

    Did a little photoshoot this summer, just wanted to share some pics

    Hi guys, This summer I did a little photoshoot, or actually my sister in law did, as I am terrible with camera's and she liked to try and make some proper photo's. Finally got around sorting and post some of them, hope you like them. Quality isn't all that good, because they are on photo...
  4. R

    Any UK/EU owners have some Gen 4 tips or cat back for sale?

    Hi guys, as transport from the USA is screaming expensive, I am on the search for a set of gen 4 tips within the EU or UK. I want to turn my Gen 3 exhaust into a proper sidepipe setup, deleting the piping underneath the car. ALternatively I could mount a aftermarket cat back, if you...
  5. R

    why does the GEN 4 standard sidepipes have no drone without H-pipe?

    As title sais, I am looking to for GEN 4 tips, so I can make a GEN 4 exhaust out of my GEN 3 assembly, but a local guy has tried this and said to have a lot of annoying drone and no more decel pops and went back to original. I looked up the artikcle numbers on both the cats and mufflers for the...
  6. R

    what's up with this soft top cover?Can we drive it fast, or is it meant for cruising?

    As title sais, I used the cover for the convertible top yesterday and over 100mile an hour I didn't feel confident it stayed tuggd in really well..nothing actually happened, but I don't like the fact that it comes up about an inch...feels more confident without, the top stays nice and tight out...
  7. R

    aircon is only blowing on max speed, relay issue?

    HI Guys, I noticed my airconditioning works perfectly cold, but when I turn the most left button (in my 05) it will only blow on max, the other 3 or so settings will just turn the airco off completely. Also with AC turned off on the button, it won't blow fresh air into the car slowly, again...
  8. R

    Replacing oxygen sensors, is it actually needed and worth it?

    Hi guys, I was browsing the internet and found on Roeracing that they advise to swap the oxygen sensors every 3-5 years because they would have carbon build up on them which makes them let the engine run richer, which causes a non necesarry rich burning engine...
  9. R

    Does my 05 have a diff drain plug?

    Hi guys, I ordered some new fluids for my 05 Viper SRT-10, now I think to remember my RT/10 standard had a diff drain plug, but this was not common, does an 05 standard have one or is it supposed to be sucked out of the fill hole? thanks on the info
  10. R

    Hi I'm back, Gen 3 this time

    Hi guys, I was around here a couple of years ago with an early 92 RT/10, I sold it 3 years ago for some other cars, but I got to miss the cubic inches and searched for a couple of cars to buy instead of a Viper (because this was history)...you'll guess nothing could match it, so no Porsche...
  11. R

    quick question SRT-10 Gen 3 about exhaust and calipers

    Hi guys, I had a look at a 2005 Viper locally and I saw a strange "exhaust like" looking thing underneath/ between the diffuser...it looked like a muffler with 2 small pipes pointing to the tarmac in the middel of the diffuser. Not sure if this is part of the standard exhaust or what it...
  12. R

    Previously owned a rt/10, now looking to buy a GEN3, any specific heads up?

    Hi Guys, I owned a 92 rt/10 3 years ago and sold it to go lightweight (with an 550bhp classic mini and than an Ariel Atom supercharged). Now it is time to get back in the snake I guess. I can't recall the GEN3 specific things to watch out for/look at when buying one. As i owned one before...
  13. R

    94 Gen I buying tips

    Hi Guys, Anyone have some tips for a previous 92 owner with some technical skills on buying a 94. Are there any specific things to look after, obviously I know I am gonna look into the following: tires fluids hoses headgasket and leaks in other gaskets sparkplug wires Thanks for...
  14. R

    RT/10 just died, easy fix

    I was on a nice cruise today with the sun on my head when the 92 Viper just died all of a sudden, uit felt like it was out of gas, but I had just filled her up! So I thought it had something to do with the pump or battery. Checked the battery, nothing, but than in the trunk I saw a relais...
  15. R

    before/after pics sill restore + radiator

    Hi, I've been doing some jobs on the 92 Viper and one of the jobs was restoring the sills in former glory. There where some points damaged due to extreme speedbumps and this was repaired very poorly, so I decided to let some real good men work on them, they did an awesome job I think. They...
  16. R

    none of the brake lights work anymore!?!

    hi, I went with my car to the garage for it's annual check and it failed because all of the brake lights failed to work! All three of them. Anybody a clue where to search for the problem? Search button doesn't help me... The block on the pedal, the connector at the brakelines under the...
  17. R

    Gen 1 drain plug gasket, new type?

    Hi, On my 92 Gen 1 I had this plastic drainplug gasket which was pretty thick, about 1/8 inch. I ordered a new one and I received a steel one with a "rubber" bit in it, it's way thinner, about like a washer. It is ordered by the dealer on my VIN. The question: can I use this, and if so...
  18. R

    Checking pcv valve on rt/10

    Hi, I found in the manual how it's done, but just wanted to check if I understand it right. I just pull the valve off with the car idling and push my finger on the valve ( so not on the part on the engine where normally the valve is placed?) Next I push the valfe back and pull the make up...
  19. R

    92 rt/10 how do I remove the radiator

    Hi, I have a leak on my radiator, so I'm going to let it be rebuilt. Are there special things to know about taking it out and back in? I have the hood off all ready and it seems a pretty easy pull out to me, drain, disconnect hoses/air intake and stuff, take it out, rebuilt and back in...
  20. R

    Roe exhaust mounted on a 92, pics

    Hi, just test drove my 92 RT/10 with it's new Roeracing catback and highflows, man what a difference, it sounds like a proper sportscar now!:headbang: Special thanks to Mike at Roeracing for his friendly service. Gotta say that it was much more of a PITA as expected. I thought that it was just...
  21. R

    sideskirts

    Hi, at this moment I am restoring the sideskirts. There is a lot of work on it, years havent been good to them. With all our speedbumps the underside has bad spots, which I now noticed are repaired badly with fill up and new paint. So now they're gonna be sandblasted, but than with a thin...
  22. R

    I'm confused, what material are the side sills?

    As title sais, I'm a bit confused, I was thinking the sidesills on my 92 should be glasfibre or some sort of plastic, just like the body, but it turns out it looks like aluminum! What is it? It's shiny underneath the paint...
  23. R

    Help,unable to remove drain plug

    Hi, As the title says, I can't get my drain plug loose. I do have to turn it counter clockwise don't I? So I can loosen it just like any other bolt? And what size is the plug on my 92 rt/10? We have the metric tools and 16 looks a bit white, but 15 is too small. If you guys tell me your size...
  24. R

    MSD wires

    Hi there, I'm going to install the MSD wires this week and am wondering, How do I know which length MSD I should use on which cilinder? I am planning on doing it one by one in order not to loose the correct place, but this way I can't see the length differences from the OEM cables. Anyone...
  25. R

    before/after pics garage

    Hello there, Hope you guys like what I did to my garage... (It may not be the coolest mancave ever, but it keeps my baby safe and dry!) Now seriously, can't wait till march, so I can drive it again! Greetings from the Netherlands, where the garages are used to small...

Latest posts

Members online

Total: 784 (members: 2, guests: 782)

Forum statistics

Threads
153,191
Posts
1,681,858
Members
17,686
Latest member
Javadog62

Share this page

Top