Search results

  1. N

    Need help on differential removal

    I am having my differential rebuilt but am having issues on getting the half shaft removed from the differential. I found an old post on the differential removal on here and they just used a prybar but I am having no luck with that method. I read another post where they mentioned Miller Tool...
  2. N

    Gen III Differential needed

    My differential recently went out. Looking for a used setup with 3.55 gears already installed. My car is a 2006. I have been told a Gen 4 would be better. Thanks for any help/leads.
  3. N

    Possible rear end issue?

    2006 with paxton. Was driving back from a long road trip and just seem to notice a clinking noise when pressing the gas then letting off (not the typical viper clinking noise). Car shifts fine and no shifter movement. I put the car on the lift and motor mounts appeared fine. Havent taken the...
  4. N

    VCA mobile app

    Picked up a new Iphone and could not find the VCA mobile app. Is it still available?
  5. N

    CCV Hose Replacement

    I have an 06 with paxton. The ccv hose at the valve cover slipped off a couple weeks ago (under hard acceleration), it seems kinda oily / slipperty and doesn't want to stay on so I clamped it. Yesterday the one at the bottom of the intake came off. Not sure if I pulled it some when I put the...
  6. N

    Good use for old tires

    Decided to make use of the old tires laying around. Just used a sawzall to cut them in half. Took about 20 minutes to cut and mount them up.
  7. N

    salvaged vipers on auction

    just seen a headline on yahoo discussing flooded cars at auction and they had the link to an auction site. Just thought I would share the link with the vipers currently up for auction...
  8. N

    Oil leak Help

    Was getting the car ready for the voi trip and was using the small air compressor to get the tire pressures to where they need to be. So I turned the key on to the ignition / start, I heard a small humming noise around the radiator area, thought it was normal when you turn the key on so didn't...
  9. N

    Need Help / Viper Security system / Car won't start

    Purchased the car (2006 model) a couple years ago which had the viper brand security system. One of the remotes broke shortly after the purchase so I did not use it anymore. Was working on the stereo last year and removed a box that was under the console which was an adjustable piece used to...
  10. N

    How to make a viper invisible.

    Park it next to this vehicle. This was at the last dallas c & c. I didn't even see the viper sitting next to it until I got home and looked at my photos.
  11. N

    Convoy to VOI

    Is anyone planning a convoy to VOI? I was thinking of leaving rather early on wednesday.
  12. N

    Viper related giveaways / ideas needed

    I don't attend many car shows but when I do I would like to give the kids something viper related (the kids who like vipers anyways). Does anyone have any cheap ideas on this or does anyone else give stuff away? I done a cruise the other day with the viper group and on the way home at a gas...
  13. N

    Garage / Shop floor covering question

    I just finished building my shop and am looking for floor covering. I was debating of using the epoxy paint from ucoatit.com but also found the plastic type snap together floor tiles. Has anyone had any experience with either 2 or have any other suggestions on another covering?
  14. N

    Video recorder / Camera

    I am looking to get a video camera / recorder for the car. I have seen a lot of videos on around the internet and seen many of them are sunction cuped to the window. I don't know anything about them, Does anyone have one and can give me some advise on what to buy and where? I did search...
  15. N

    Intercooler water level on Paxton Cars

    I opened up the cap on the stock intercooler and did not see any water. Should it be full?
  16. N

    July C&C

    Any one going to head to the C&C this weekend?
  17. N

    PCM reset and now have power / Need Help

    I posted on here a week ago regarding to my 06 where I sent it away to have it supercharged which resulted in 661 rwhp. But had to send it right back to the shop to have some work done that did not get completed. But when I received the car back the second time it didn't seem to have full...
  18. N

    Supercharged HP question

    I have an 06 which I mistakenly had hennessey do the supercharger upgrade to. It was finished at the beginning of the year with their reported HP of 661 (did receive a dyno sheet). It seemed to have good power and would easily spin the tires through 3rd gear. Well, I had some small issues...
  19. N

    Exhaust Cutout

    A friend of mine just purchased the challenger drag pak with the viper engine. It is very loud and sounded good, so I am assuming that it only has headers on it. Has anyone ever installed an exhaust cutout on a gen 3? Do you think it would have a similar sound as the drag pak challenger? Not...
  20. N

    Alarm system light

    I was doing some electrical work on my 06 and my led for the security system located at the mirror quit working. It is not getting any power. Any suggestions on where to start tracking down the issue?
  21. N

    Interior lighting electrical question

    The previous owner had removed the original rearview mirror and installed one with a compass and other stuff on it but left the original wiring still in place. Everything works fine just the fact that there is no lights now at the mirror. So at dark, the only interior lights the vert has is the...
  22. N

    Folding Chair

    I am looking for a couple of the folding outdoor chairs which have the gen3/4 logo. Illinois VCA made some a few years ago but no longer have them. I could get them custom made but most companies which do that type of work have a minimum of more than I want to pay for. Any one know where I...
  23. N

    RB1 Stereo / Sirius Setup

    I purchased my 06 and the previous owner had already installed the rb1 stereo but to my knowledge did did not have it setup for siruis. Has anyone installed the rb1 in their gen III car with the sirius components? Since this was not an option for the 06 I can not find the required components...
  24. N

    Center console / drink holder

    I am wanting drink holders in my car and ordered another console lid and am going to take it to a shop and have them mess with it to custom form the lid into 2 cup holders, was thinking of like a raised viper emblem or possibly a snake curling up. Has anyone done something like this and if so...
  25. N

    Production # for my color

    I have an 06 vert which is black with the silver stripes. Anyone know how many of these were built? I looked on the viper registry but didn't see the option for the stripes? Thanks for your help, I am just curious (photo attached).

Latest posts

Members online

Total: 597 (members: 12, guests: 585)

Forum statistics

Threads
153,184
Posts
1,681,828
Members
17,682
Latest member
molgera

Share this page

Top