Search results

  1. S

    Gen 3 Throttle body, Roe Racing vs BBK 67mm

    I'm looking for opinions on the Roe Racing single bore vs the BBK 67mm throttle bodies. I'm running a stock engine. The only modifications I have made is to delete the cats and install 3" exhaust. Just from a glance at the roe racing, I'm wondering if this large of an air intake will...
  2. S

    Gen 3 tire replacement question

    Thanks Bill!!
  3. S

    Gen 3 tire replacement question

    Grant from the tire rack sent me this link explaining speed ratings. It's a really good basic explanation for a beginner like me. :) http://www.tirerack.com/tires/tiretech/techpage.jsp?techid=35&
  4. S

    Gen 3 tire replacement question

    The speed rating is Y97 for both. I've had the rear tires for awhile. I'm getting the front tires from the Tire Rack. (285 35 R18)
  5. S

    Gen 3 tire replacement question

    Hi All, I'm replacing the tires on my car and ran into a problem. I'm going with Pirelli PZero (not run flats) On the back I'm using 355 30 ZR19. On the front I can only find 285 35 R18. I thing that I can get by with running a little wider tire but don't know what the difference is between...
  6. S

    Gen 3 power steering pump to cooling fan qiuck connect fitting/hose

    OK, I found a post that gave me the answer!!!! I split the old fitting. After studying it, I don't see how the special tool could remove the fitting without damaging the hose end. "Power Steering High Pressure Line Quick Disconnect Leak"
  7. S

    Gen 3 power steering pump to cooling fan qiuck connect fitting/hose

    My power steering to cooling fan hose is leaking at the pump quick connect fitting. I've tried several things to remove the QC fitting but am not having any luck. Does anyone know how to remove this fitting from the hose? Thanks, Scott
  8. S

    Gen 3 Replacement tires

    How do I contact Jon B?
  9. S

    Gen 3 Replacement tires

    Hi All, I'm replacing my run flat tires and need some advice on what new tirers I should use. I've been told that the best tires are Michelin Super Sports or Pirelli P Zero. I've found some good deals on Pirelli 355 30 19. (I though I might go a little wider then the stock tire) I've...
  10. S

    Gen 3 tire alignment

    I don't have the first alignment spects but here are the ones from the second alignment. (This one made the steering feel loose) Front left: Camber -0.3 Caster 5.1 Toe 0.06 Front right: Camber -0.3 Caster 5.5 Toe 0.13 Front total toe 0.20 Steer ahead -0.04 Rear left: Camber -0.7 Toe 0.13...
  11. S

    Gen 3 tire alignment

    I am using run flats. Thanks for the info.
  12. S

    Gen 3 tire alignment

    Both alignments were all 4 wheels. The only thing that both did was to leave the Caster (Caster or camber) off slightly to compensate for the slope of the road. (They said they do this on all cars)
  13. S

    Gen 3 tire alignment

    I've had my 2003 Viper aligned at a local shop a few months ago. The steering just didn't feel right so I had it aligned at a different shop a couple of weeks ago. The steering still feels wrong.... (The first time the car would pull hard any time it made contact with a crack along the side of...
  14. S

    Windshield wiper arms

    Hi According to the pic, the arm with the pronounced bend near the stud mounting end is on the DS. Thanks for the help!!!!!!!
  15. S

    Windshield wiper arms

    2003 convertible
  16. S

    Windshield wiper arms

    Hi All, I'm went to re-install my wiper arms and can't remember which is DS and PS... My manual doesn't show which is which. One of the arms has a pronounced bend near the stud mounting end. Is this the PS?
  17. S

    Towing with 2 wheel dolly

    Hi Steve, Since this is a project car, the exhaust covers have been removed so the clearance on the dolly fenders is good. My problem is that I'm not familiar with the transmission and differential and don't know if towing will damage to the running gear.
  18. S

    Towing with 2 wheel dolly

    Hi All, I need to transport my Gen 3. I have a 2 wheel dolly that I have used for other manual transmission cars. Can I use this on my Viper and just put the transmission in neutral? Thanks
  19. S

    2003 Viper carbon fiber fender support adhesive

    Does anyone know what adhesive to use to attach the fender supports to the frame rails? Thanks. Scott
  20. S

    Generation 3 Starter power and engine ground wires?

    Hi Tom, Now I feel better. Found the ground and now the secondary starter terminal wire makes sense. Thanks for your help!!!!!
  21. S

    Generation 3 Starter power and engine ground wires?

    Hi All, I recently purchased a 2003 Viper for a project car. Pulled the engine. (I have to say out of all the engines I've pulled, this was by far the easiest) Re-installing the engine was a breeze except for one problem. (Maybe 2) The last thing I did was located the main starter wire...

Latest posts

Members online

Total: 544 (members: 14, guests: 530)

Forum statistics

Threads
153,196
Posts
1,681,908
Members
17,695
Latest member
kmagnuss

Share this page

Top