Just acquired a set of what I was told, new Viper seats.
They do smell and look new.
The only issue that I have is that they look like Gen 3-4 seats
but the inner part material looks like Gen 5.
Any suggestions, I would like to sell these.
Thanks,
Frank
Have one set of AB Quality Wires High Temp for the Gen 3 Viper for sale.
$225.00 shipping included except Alaska and Hawaii.
Please text me at 321-482-7348 or
[email protected]
Thank you,
Frank
I changed the Manual Transmission Fluid on my 2005.
First time using AMSOIL Synthetic SAE 75W90 API GL-4
Shifting is smoother. Nice surprise !!!!
Fill Plug 20 ft/lbs
Drain Plug 28 ft/lbs
TIRE LIFE
While most tires will need replacement before they achieve 10 years, it is recommended that any tires in service 10 years or more from the date of manufacture, including spare tires, be replaced with new tires as a precaution even if such tires appear serviceable and even if they have...
Just some info on the removal of the shifter.
1. Remove Ring
2. Lift leather Boot
3. Index(mark) shifter nut. Easier to re-install in correct alignment.
4. Loosen shifter nut. 16mm and 19mm
5. Remove Shifter and Boot
Reverse for installation.
Torque nut to 30 LBS or tighten matching your...
No disrespect to anyone. On my 2005 Gen 3 Viper, I just removed the airbag module and replaced it with the new one.
I will post pictures and procedure in the near future.
Here are some of the facts.
1. Steering wheel does not have to be removed, loosen or messed with at all. It is nowhere near...
Are the Console Shifter Bezel for the Gen 3 and Gen 4 Viper the same.
Part numbers are different. Gen 3 shows as discontinued. Gen 4 available.
Gen 4 shows as not compatible with Gen 3.
But the Carbon Fiber Bezel kit is good for 2003 to 2010 Vipers.
2005 - 2010 Dodge Viper SRT10 Carbon Fiber...
Found a way to place the 2005 Viper on wheel jacks in a safe matter.
It works really well and much cheaper than buying wheel jacks.
I used regular jacks and wheel spacers.
Of course, I always have a back up stand somewhere.
Too old to die. lol
Four wheels of the ground.
Pictures included...
Found a way to place the 2005 Viper on wheel jacks in a safe matter.
It works really well and much cheaper than buying wheel jacks.
I used regular jacks and wheel spacers.
Of course, I always have a back up stand somewhere.
Too old to die. lol
Four wheels of the ground.
Pictures included...
1. Push leather boot down the original shifter shaft.
2. Place a 16mm and 19mm wrench and remove original shaft. Use a towel to protect bezel.
3. Original knob has been removed
4. Ready to install short knob
5. Install short knob using the same 16mm and 19mm wrench...
I just installed the 2010 Viper ACR short shifter knob on my 2005 Viper. It is just great.
I would like to show a comparison of some of the knobs available.
I found different post in this site but I could not find detailed pictures and measurements
.
The long one (3.5 inch shaft) is the 2005...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.