Tom and Vipers
Enthusiast
Here are a couple pics.
The fascia has a series of nut plates along the front edge.
If the shape of the splitter is a "D", the straight aft edge would not be attached to anything - that's a long unsupported edge.
OR the splitter is a curved, maybe 8" wide piece, like a curved strip that extends maybe 4" fore and aft of the attachment screws.
UPDATE: Had the bright idea to scrape BaT for one with and found either 1 or 2 (also is on Gen 1) and NO underneath pics! @#$(*&#@*($
ALSO: Looked at a bunch of youtube import tuners making plywood splitters and they were all massive "skid plates" which in the Viper's case would be a massive D-shape that would span from the front edge back to the fascia rear mount fasteners at the frame rail ends. NOTE: The fascia bottom is thin and flimsy and spans that distance of about 2 feet.
Another pic w/"Cat Eyes" filled in:
Here you can see if a "D" shape, the splitter would be a huge piece approaching 2' wide at the center.
Considering how far the splitter wraps around, I'm thinking it would be "narrow" strip that doesn't extend far from the fasteners.
The fascia has a series of nut plates along the front edge.
If the shape of the splitter is a "D", the straight aft edge would not be attached to anything - that's a long unsupported edge.
OR the splitter is a curved, maybe 8" wide piece, like a curved strip that extends maybe 4" fore and aft of the attachment screws.
UPDATE: Had the bright idea to scrape BaT for one with and found either 1 or 2 (also is on Gen 1) and NO underneath pics! @#$(*&#@*($
ALSO: Looked at a bunch of youtube import tuners making plywood splitters and they were all massive "skid plates" which in the Viper's case would be a massive D-shape that would span from the front edge back to the fascia rear mount fasteners at the frame rail ends. NOTE: The fascia bottom is thin and flimsy and spans that distance of about 2 feet.
You must be registered for see images attach
Another pic w/"Cat Eyes" filled in:
Here you can see if a "D" shape, the splitter would be a huge piece approaching 2' wide at the center.
Considering how far the splitter wraps around, I'm thinking it would be "narrow" strip that doesn't extend far from the fasteners.
You must be registered for see images attach
Last edited:
