1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

radiator for racing

Discussion in 'SRT10 and SRT10 Coupe Discussions' started by Steppenwolf, Jul 12, 2007.

  1. Steppenwolf

    Steppenwolf Viper Owner

    Posts:
    67
    Joined:
    Apr 16, 2007
    Location:
    ITALY NE (near Venice)
  2. Viper X

    Viper X VCA Member - South VCA Member

    Posts:
    3,471
    Joined:
    May 1, 2004
    I chose the Alans Performance Radiator for my GTS track car and my Paxton SRT-10. Nice units. Work well. Not a perfect replacement fit in the SRT, but very close. No real mods to make it fit but a little bit of "elbow grease".

    I have "heard" that the Fluidyne works OK too but may require some modifications to fit. Perhaps someone else with first hand experience will help.

    Dan:usa:
     
  3. Steppenwolf

    Steppenwolf Viper Owner

    Posts:
    67
    Joined:
    Apr 16, 2007
    Location:
    ITALY NE (near Venice)
    Why " not a perfect replacement fit in the SRT 10 but very close...???
    What's the problem?
    Compliments for your black beast!!!:2tu: (possible receive a detailed tuning description also by PM?)

    Luigi:drive:
     
  4. REDSLED

    REDSLED Viper Owner

    Posts:
    1,484
    Joined:
    Jan 30, 2002
    Location:
    Bakersfield, CA USA
    I would use the Ron Davis Unit.
    Parts Rack sells them
     
  5. Viper X

    Viper X VCA Member - South VCA Member

    Posts:
    3,471
    Joined:
    May 1, 2004
    Steppenwolf,

    On my SRT-10, some bending of the top brackets was required to make the radiator fit. The bottom rad fit was not perfect and the OE bolts that hold the A/C rad on were too long and had to be trimmed.

    Not large issues but not a perfect fit either.

    Dan
     

Share This Page