maverickagm's latest activity
-
Mmaverickagm reacted to njsteve's post in the thread Gen I 1992/early 93 Radiator removal versus late 93 & up & Gen II. Total Insanity! with
Like.
I had to pull the radiator from my January 1993 built Gen 1, that I've owned since new. Just a heads-up in case anyone out there... -
MJust found these repair manuals: https://charm.li/Dodge/
-
Mmaverickagm reacted to DaJerseyViper's post in the thread Lumbar support fix with no Viper tax !!!! with Like.
I noticed that my lumbar support didn't work on my 2002 RT/10 , and the culprit was a torn off inflation bulb. Rather than buying the...
-
Mmaverickagm replied to the thread Lumbar support fix with no Viper tax !!!!.9 years later.... Thank you sir! I just replaced both of mine for $19 Canadian dollar bux (which is only about $14 in freedom dollars)...
-
Mmaverickagm replied to the thread Gen 1 Audio Upgrade Thread..I have no idea. But this type of scenario is why I provided a reference point (with an offset in mm) along with how I came to the...
-
Mmaverickagm replied to the thread 1993 stereo head unit removal and install.Note to others: If you've come here searching for a solution, see posts 17-20 here...
-
Mmaverickagm replied to the thread Gen 1 wires from trunk to interior?.That's a good suggestion. I had actually tried ferrite blocks on one pair of RCAs as well as a make-shift ground loop isolator, but the...
-
Mmaverickagm replied to the thread Gen 1 Audio Upgrade Thread..Running new cables from trunk to interior continued. 3) With the hole drilled, the rca cables must be fished through. 4) The carpet is...
-
-
Mmaverickagm replied to the thread Gen 1 Audio Upgrade Thread..Running new cables from trunk to interior. This post explains what I'm solving...
-
-
MI installed some new speakers and they are more sensitive to poor audio signal. With the key on and engine off, I turn on the head unit...
-
Mmaverickagm replied to the thread Battery tender and mounting it inside engine bay.You may also want to ask yourself, how weatherproof is that carquest charger? What ambient temperature is it rated to run at? How...
-
Mmaverickagm replied to the thread Battery tender and mounting it inside engine bay.Similar story here. My car came with an orange and black plug just behind the front bumper. I found out it's a plug for a CTEK charger...
-
