Sammy corrections for your check engine light can be made by installing correct handshaking parts to your exhaust-system.There is a "Viper parts person" on this board that continues to do his home work in locating the parts which work.For example with correct high flow cat-convertors you will...
Sammy corrections for your check engine light can be made by installing correct handshaking parts to your exhaust-system.There is a "Viper parts person" on this board that continues to do his home work in locating the parts which work.For example with correct high flow cat-convertors you will...
Also the factory PCM uses Air-Temp and Cam and Crank Shaft inputs (miss-firer data information),along with the most important input that allows the factory computer to release all the Fuel&IGN tables which are already programmed in the stock computer.This most important inputs are the Pre&Post...
Don first of all before you installed your new exhaust system was there any concern in regards to a check-engine light.If so what codes were stored.The first step that you should perform before you start spending addition funds trying to locate your problem.
Take your Viper to the dealer(you are...
Todd,first of all how many miles are on your car?You are correct in saying that you may have fuel pressure,But you may not have correct fuel volume.Remove your fuel-filter and sample the fuel into a clean container.If the fuel is dirty-change the filter.We do have an open return fuel system...
Warren,you have a open-circuit(possitive +)sorce which supplys voltage to the ALT-voltage regulator,the A/C compressor clutch,and coolant fan motor.The dash lamp is displayed because on start-up,with the key-on the lamp takes a ground from the Alt-regulator circuit,until you start the engine...
Re: Mopar \"Street\" heads
A few questions on this subject of cylinder heads.The spec-CC's on all three cylinder heads,before and after: cnc or manual porting.Also the spec-CC's on the amount of coolant
the three differant heads hold.
Stock,Mopar Performance,and GTSR Racer heads.
There is also...
This system which is supplyed by Carputing.com is for GM-1994-1997 LT-I & LT-4 and they do not state that you can apply
the system to a OBD-2,LS-6 fuel management system.
Also there is no system that can correctly reconfigure the fuel
management and direct-ign system tables for the Viper that...
Installing StopTech S/S brake hoses as an upgade(BY A TRAINED TECH) to your brake system with or with/out ABS-Brakes, should be a number one upgrade for your safety and towards others on the track and on the street.As to ABS systems and operations on 2001 Viper model years,the system works the...
PFM Products Pre-Chiller
PFM Product's website is currently being updated.Please contact me in regards to any information on the Pre-Chiller system.E-mail at. [email protected] cell@805-279-5841 PFM Products
Thanks,Wm
PFM Products Pre-Chiller
PFM Product's website is currently being updated.Please contact me in regards to any information on the Pre-Chiller system.E-mail at. [email protected] cell@714-240-5841 PFM Products
Thanks,Wm
PFM Products Pre-Chiller
PFM Product's website is currently being updated.Please contact me in regards to any information on the Pre-Chiller system.E-mail at. [email protected] cell@805-279-5841 PFM Products
Thanks,Wm
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.