Search results

  1. A

    My 99 viper vrs my H/C C5 1/4 mile gtech

    I have a belltronics gtech i got from circuit city two years ago. I have tested it at the drag strip and found it to be within .5 tenths and 1-1.5 mph of my actual time slips after each run. So I reallt trust it from my experiences. My C5 was a 2004 auto with 2.73 gears. I put on LS6 heads and...
  2. A

    How to install TandD 1.7 roller rockers on a 99

    Hey guys need a little help.. Im purchasing some TnD 1.7 roller rockers as well as rods... My local shop who Ive trusted for around 4 years on my camaro's and Vettes says theve never worked on a Viper before and would like any pics or instructions to change the roller rockers on my 99 rt10...
  3. A

    gen 2 rt10 vehicle weight

    As much as i love vipers the one thing that always gets brought up is their weight.. But going from a 350 HP 2004 C5 to a 450 HP rt10 ment that the weight differance wouldnt mean anything and i made the jump 7 months ago... Now you'd swear that Vipers weigh 3500-3600 pounds the way other car...
  4. A

    bolt on questions....

    All right guys..im just trying to figure out how far a gen 2 viper can go with bolt ons alone.. I love heads and cams as well as SC's and TT's... but theirs just somthing great about looking in that highly modded V8's or supras eyes and telling you beat him with a stock engine bolt on...
  5. A

    smooth tube no cats 99 rt10 VS fully built 408 firebird VIDEO

    444/488 standard for the Viper ( smooth tubes KandN's and no cats 476/465 standard for the Bird ( H/C 408 with most bolt ons) http://www.ls1tech.com/forums/showthread.php?t=661915
  6. A

    Just got AEM for my birth day..

    Just had the best birthday of my short 27 year life man.... My wife through me a party and to my surprise my cake had an rt10 Viper on it..Even more surprising was unwrapping a brand new AEM computer?????? seems that my wife colaberated with my viper owning buddy and got this for me.. i was...
  7. A

    borla 1 5/8 headers on a 99...what rwhp

    Borla 1 5/8 headers.... ive got a 99 currently making 428/473 with smooth tubes and cat delete.. What would these headers give me with NO tuning...As well what could i expect with vec2 tuning and these headers? Also what do they sell for brand new? THANKS
  8. A

    1999 rt10...$2300 to mod...What to do

    well my 1999 rt10 currently has smooth tubes and no cats putting out 428 rwhp and 473 rwt... My wife just gave me the seal of aprovement to spend up to $2300 to mod my baby some more to try and edge out a nasty local 408 firebird with all the works putting out around 500 rwhp and 500 rwt...
  9. A

    428 rwhp 99 vrs 550 rwhp supra

    * this was all done on a closed course with some lesser sports cars that got lapped* My viper is a 99 rt10 with an air intake (smooth tubes) and no cats (straight pipes).....producing 428 rwhp and 473 rwt My buddies supra is a 1000 rwhp beaste with 50 grand worth of modifications...... Out of...
  10. A

    Name of oxidised blue 1.7 roller rockers

    A buddy of mine is using 1.7 roller rockers on his supercharged GTS. I figure that since they work fine on his 700 rwhp beatse that they should be more than safe for my NA car.. They are blue and cost around 850$ and i think made by D and L or somthing. he wasnt quite sure as well.. Any help...
  11. A

    Somthing wrong with engine temps....

    well went out this morning and started the car up..Let her idle for a few minutes while i was trying to find some keys and came back to the car to see that my engine temp was well pass the red zone!!!!! i immediatly turn off the 99 rt 10 viper and preceed to drive my truck instead.. come back...
  12. A

    ROE smooth tubes and straight pipe cat! DYNO results

    100% bone stock my 1999 rt10 put down 410 rwhp and 465 rwt SAE on a dyno jet.. today with ROE smooth tubes and no cats ( straight pipes)....ON THE SAME DYNO She put down 428 rwhp and 473 rwt.. Well thought I would share my gains
  13. A

    Ok..remeoved rocker panals and............

    Now I SEE THESE TWO HUGE CAT/MUFFLER LOOKING THINGS.... My cars going to the shop to have the cats removed tomorrow. but now im kinda thrwon off as to what im supposed to have straight piped. Their are two cats on each side of the vehicle????? Do i straight pipe them both on each side. Or is...
  14. A

    Hood wont stay closed

    Well my 99 hood keeps opening on the drivers side in the front... Also when I try to completely close it theirs an 1/4 inch of play on the drivers side..While the passanger side is nice and tight... And some times while driving the passanger side of the hood will open about 1 inch ( like i...
  15. A

    Help with hood emblem

    I justb ordered the gen 3 hood emblem for my 99 rt10.. How many inches down dose it go from the crack that seperates the hood and nose????? Had the car repainted and took the old emblem off..Now im not sure were the new emblem goes..
  16. A

    How much to install roller rockers?????

    How much is it typically to install roller rockers on a gen 2???? The guys i trust have me pay 1500 to install heads and cam into my C5...Based off this. how much do you think roller rockers would be????? Do you have to remove the heads or cam to install these. I know my v10 trivia is limited...
  17. A

    rt10 and GTS have same exact rear brake/turn lights

    Reason im asking is because i want to order black out overlays for my 99 rt10...Guy named BLUE BATMOBILE sells them for GTS Vipers...Will they work fine on my rt10??? Thanks for any help
  18. A

    Viper bone stock 1/4 mile list

    Been working on this for over a month now... hopefully over time more of us will post some bone stock times to add to this list...For those who have posted their stock times. i sincerely thank you for helping this list become an reality. *THIS LIST IS FOR 100% BONE STOCK VIPERS* GEN 1 Rich...
  19. A

    Bone stock Viper list

    Been working on this for over a month now... hopefully over time more of us will post some bone stock times to add to this list...For those who have posted their stock times. i sincerely thank you for helping this list become an reality. *THIS LIST IS FOR 100% BONE STOCK VIPERS* GEN 1 Rich...
  20. A

    How to remove side sills

    Took my 99 rt10 to my local muffler man today to get rid of the cats when he said he wouldnt do it cas he dosent want to touch the side sills... Is it just simply unbolting the bottom or is it pretty complicated..Any pictures or walk throughs to help me out here???? i really wanna have this...
  21. A

    were to buy NXexpress 200-300 shot kit????

    Well im new to this NOS crap but decided to be cheap and do it... how much am i looking at for the kit and were the heck can i find it?????? Sorry if I just dont sound that excited..But my wife wouldnt let me pull the trigger on a used 5 grand roe SC or evn 3 grand heads...So Ill make power...
  22. A

    will removing cats on a 99 throw any codes

    Hi guys...Im currently bone stock and putting down 410/465.. im about to order a smooth tube and go catless and then dyno hoping for 425 rwhp and 480 rwt...Can i just have my muffler shop remove the cats and add straight piped or will the 99 throw codes and give me problems? Thanks for any...
  23. A

    We need a bone stock gen1/2, 1/4 mile list. I can help

    This is a list i made 1-2 years ago for the corvette forum when i had a c5...It took around 6 months but you can see the data is nice to have. It works pretty simply. I have one thread were you tell me what you ran 100% bone stock down to the tires and air filters... Then on another thread i...
  24. A

    we have a bone stock 1/4 mile list??????????

    Pretty easy to find the fastest bone stock C5's..c6's and C5Z and c6Z's... Do we have a quickest bone stock gen1..gen2...gen3 list anywere???? Thanks for any help.
  25. A

    cheap mods with decent return??????

    Hi...I recently had a stock dyno done on a dyno jet that returned 410 /465 SAE..For my 1999 rt10 Had a run in with a 525 rwhp Supra that took me by 3 cars on a closed track from 70-130 mph... On the same track had a run in with a 430 awhp EVO that took me by one car ength from 60-130 mph...

Latest posts

Members online

Total: 863 (members: 8, guests: 855)

Forum statistics

Threads
153,234
Posts
1,682,245
Members
17,728
Latest member
booth

Share this page

Top