08 RWHP dyno #

[2snakes]

How many have got there car on the dyno?? What type of dyno ?? What horsepower ??

 

[adamlotus]

my 08 with 1500 miles did 515 rwhp and 482 tq,i dont know what kind of dyno but it was done at dc performance.also if you look under gen section theres a topic under dyno day results which theres a few other 08s that were there.

 

[mjorgensen Woodhouse]

Under 100 miles by request 481 RWHP on a load bearing Mustang dyno in sim mode 4th gear of course!

 

[FikseGTS]

Stock 2008 Dodge Viper SRT10 Dyno Sheet Details - DragTimes.com
Stock 2008 Dodge Viper Dyno Sheet Details - DragTimes.com
Stock 2008 Dodge Viper SRT10 Dyno Sheet Details - DragTimes.com
Stock 2008 Dodge Viper SRT10 Coupe Dyno Sheet Details - DragTimes.com

 

[Viper X]

DC's dyno is a Dynojet.

 

[Newport Viper]

DC's dyno is a Dynojet.

What happened to the results from the last DC dyno day?

Don't see them anywhere?

Lot of 08's dynoed there.....

 

[Luna C]

I posted this recently. Sorry for the repost. This is stock.

 

[Dan Cragin]

Dyno Days at DC Performance​

​

Name Model Horsepower/Torque Modifications

1. Dave Cawthorne Gen 2 422.30/461.87 Modified
2 .Lance Kouchi Gen 2 397.43/440.11 Stock
3. Dave Kuzmiak Gen 3 444.28/472.65 Stock
4. Eddie Arguelles Gen 3 452.10/475.38 DC Tune
5. Steve Shaw Gen 4* 521.42/494.45 Stock
6. Norman Greitzer Gen 4 * 507.05/481.33 Stock
7. Angel Calderon Gen 3 424.34/443.57 Stock
8. Eddie Reinsma Gen 3 436.30/464.02 Stock
9. Steve Smoot Gen 3 658.65/580.85 Paxton
10. Kobi Sial Gen 4* 558.11/528.45 Headers
11.Chris Sienecki Gen 3 484.31/473.68 Headers
12. George Balejian Gen 3 405..95/449.72 Stock
13. Peter Hausherr Gen 2 426.09/466.80 Headers
14. Kaia Rexroad Gen 3 444.52/470.57 Stock
15. Sean Casey Gen4* 563.44/526.85 Headers
16. Adam Melikoff Gen 4* 515.32/482.67 Stock
17. Michael Burgoyne Gen 3 477.52/502.68 DC Tune/Headers
18. Mark Kasparoff Gen4* 523.95/481.24 Stock
19. Rick Hollis Gen 2 855.82/798.75 Paxton
20. ErnieTaylor Mustang 249.28/247.93 Stock
21. M. Greenberg Gen 2 636.17/562.37 Race Car


* 2008 Viper

 

[black mamba1]

Dyno Days at DC Performance​

Name Model Horsepower/Torque Modifications

1. Dave Cawthorne Gen 2 422.30/461.87 Modified
2 .Lance Kouchi Gen 2 397.43/440.11 Stock
3. Dave Kuzmiak Gen 3 444.28/472.65 Stock
4. Eddie Arguelles Gen 3 452.10/475.38 DC Tune
5. Steve Shaw Gen 4* 521.42/494.45 Stock
6. Norman Greitzer Gen 4 * 507.05/481.33 Stock
7. Angel Calderon Gen 3 424.34/443.57 Stock
8. Eddie Reinsma Gen 3 436.30/464.02 Stock
9. Steve Smoot Gen 3 658.65/580.85 Paxton
10. Kobi Sial Gen 4* 558.11/528.45 Headers
11.Chris Sienecki Gen 3 484.31/473.68 Headers
12. George Balejian Gen 3 405..95/449.72 Stock
13. Peter Hausherr Gen 2 426.09/466.80 Headers
14. Kaia Rexroad Gen 3 444.52/470.57 Stock
15. Sean Casey Gen4* 563.44/526.85 Headers
16. Adam Melikoff Gen 4* 515.32/482.67 Stock
17. Michael Burgoyne Gen 3 477.52/502.68 DC Tune/Headers
18. Mark Kasparoff Gen4* 523.95/481.24 Stock
19. Rick Hollis Gen 2 855.82/798.75 Paxton
20. ErnieTaylor Mustang 249.28/247.93 Stock
21. M. Greenberg Gen 2 636.17/562.37 Race Car


* 2008 Viper[/quote

You use a dyno jet right?

 

[rcl4668]

Here's the baseline dyno run on my 2008 on a Mustang Dyno. The driveline was totally stock and the only addition to the car that might create some variability was the addition of lighter weight Sidewinder wheels. The numbers were 529 rwhp and 505 rw torque at about 70 degrees:

/Rich

 

[Newport Viper]

http://gallery.viperclub.org/showphoto.php/photo/46776/ppuser/21501

 

[Newport Viper]

post deleted