19 inch CCW 505A clearance with big brakes?

[99VPRGTS]

Tried a search with a few key words and didn't turn up anything. My car has Stop Tech 4 piston big brakes WITH stoptech rotors on all four wheels. It is the standard setup that stoptech sells. My question is will 19 inch CCW 505A's fit with them on there? The car is a 1997 GTS and it came with the 1999-2002 18 inch stock rims and they fit with no issues...it's a close fit (maybe a little less than half an inch) but good. Thanks!

-Brent

 

[KNG SNKE]

You shouldn't have an issue but you might need to buy spacers depending of the offset.

 

[dave6666]

I think the lip width is what you need to consider. So what are you looking at?

__________________________________________________

Please note the complaint-free content. Dave, contemporary mod-rice Viper/Ricer owner, and I approve this message.

 

[DanielR]

I have a similar setup and everything fits with plenty of clearance.

CCW SP600
19x11 Front 2" lip
19x13 Rear 3" lip

StopTech 6-piston front 14" two-piece rotor, 4-piston rear 13" two-piece rotor

You must be registered for see images attach

 

[JohnnyViper]

nice picture

 

[99VPRGTS]

I have a similar setup and everything fits with plenty of clearance.

CCW SP600
19x11 Front 2" lip
19x13 Rear 3" lip

StopTech 6-piston front 14" two-piece rotor, 4-piston rear 13" two-piece rotor

You must be registered for see images attach

Man your car is ugly. LOL j/k that is beautiful!!! So you didn't get anything custom done on them from CCW when you got the rims?

 

[DanielR]

Man your car is ugly. LOL j/k that is beautiful!!! So you didn't get anything custom done on them from CCW when you got the rims?

No, nothing custom. I got the wheels first when I had stock brakes. I installed the StopTech kit later.

 

[SingleMalt]

I had 505As on my car with Stoptech 4-wheel BBK -- no issues.

Mike

 

[ACRSNK]

I have a similar setup and everything fits with plenty of clearance.

CCW SP600
19x11 Front 2" lip
19x13 Rear 3" lip

StopTech 6-piston front 14" two-piece rotor, 4-piston rear 13" two-piece rotor

You must be registered for see images attach

That thing looks SICK!!!!!!!!!!! Love those wheels!

 

[speedracervr4]

Same here!!

I had 505As on my car with Stoptech 4-wheel BBK -- no issues.

Mike

 

[jmasin]

Looks like the others have answered, but for a general comment, Stoptech has downloadable templates that show their brake/rotor profiles and these can be used to assess clearance. So often it isn't backspacing or even the lip, but the spoke design and how they curve.