00SVTdubs
Enthusiast
My car is bone stock performance wise except for having the cats removed... I was told by the previous owner that the car dynod 444rwhp-501rwtq SAE which I thought was REALLY high for being basically bone stock. He said the car was cold and in "good dyno number mode"... well, Im not all about numbers so I drove the car back from wyoming and straight onto the dyno to see REAL WORLD numbers for the car. I also wanted to check to make sure the a/f was safe, I dont really care about numbers unless they are at the track but I just wanted to get a baseline dyno before the CPE turbos go on (will use same dyno, etc)
The car has been 12.0@119 at sea level and 12.9@111 at high elevation so it runs very well.
Here are the results!
431rwhp-488rwtq SAE! No cool down, no ice, no bs... just hot off the street, on the dyno and thats it. I am VERY pleased to say the least.
Here are some vids and pics of the car...
dyno pull
http://www.youtube.com/watch?v=i9O8lNQo3Bs
dyno pull from inside the car
http://www.youtube.com/watch?v=2ByaruKUe8o
badass view of car pulling onto the dyno
http://www.youtube.com/watch?v=brRbCKKeXIQ
pics from the dyno
pics going to grab some food and beer downtown after the dyno
I was having some clutch issues at the track and I need to upgrade for the turbos anyway so I went ahead and ordered my first set of mods. I got the spec 3+ clutch, the shifter bolt that gets ride of the rubber isolator, a 170 stat, 21-25psi coolant cap, unitrax halfshafts and I am looking into radiators as we speak.
The car has been 12.0@119 at sea level and 12.9@111 at high elevation so it runs very well.
Here are the results!
431rwhp-488rwtq SAE! No cool down, no ice, no bs... just hot off the street, on the dyno and thats it. I am VERY pleased to say the least.
Here are some vids and pics of the car...
dyno pull
http://www.youtube.com/watch?v=i9O8lNQo3Bs
dyno pull from inside the car
http://www.youtube.com/watch?v=2ByaruKUe8o
badass view of car pulling onto the dyno
http://www.youtube.com/watch?v=brRbCKKeXIQ
pics from the dyno
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
pics going to grab some food and beer downtown after the dyno
You must be registered for see images attach
You must be registered for see images attach
I was having some clutch issues at the track and I need to upgrade for the turbos anyway so I went ahead and ordered my first set of mods. I got the spec 3+ clutch, the shifter bolt that gets ride of the rubber isolator, a 170 stat, 21-25psi coolant cap, unitrax halfshafts and I am looking into radiators as we speak.