Electrical Help Needed on SRT-10

[VOI9 ASP]

Does anyone know what color the (VSS) Vehicle Speed Sensor wire is and the apporximate location on the SRT-10? I'm having a Navigation System installed and they said it would help if anyone knew this info.

 

[GR8_ASP]

Two places mentioned in the manual. The ABS connector (white/orange cavity #13) and PCM connector #2 (white/oroange cavity #27).

Hope this helps Jerry.

 

[Rich Carlson]

The WSS provides the ICU wheel rotation. The ICU provides a digital signal via a hardwire as mentioned above to the JTEC. The JTEC puts vehicle speed on the PCI bus which is sent to the MIC to be displayed on the speedo. The VSS was eliminated a couple of years ago. Hope this helps.

 

[VOI9 ASP]

Ron and Rich

Thanks for your help. I think I have enough to complete the install. Photos to follow when complete.