Gen 2 oil pressure relief valve

[Catwood]

Does anyone know the size of those metal caps that have to come out and are destroyed in the process. I want to get them ahead of time.

Thanks,

Carl

 

[GTS Dean]

Mash a piece of clay, playdoh, wax, ball of aluminum foil, or (even bread) into the recess and measure the imprint.

 

[Catwood]

I wanted to pick them up before I take it apart

 

[vp97]

I'm pretty sure they are 5/8. Ill check my extra cover when I get to my shop later

 

[Catwood]

ok, thanks.

 

[GTS Dean]

I'm pretty sure they are 5/8. Ill check my extra cover when I get to my shop later

That's a number that rings a bell with me too.

 

[vp97]

Sorry for the delay. Yes, a 5/8 cup plug is what ya need

 

[MTGTS]

where can you get these cup plugs from?

 

[1TONY1]

where can you get these cup plugs from?

http://www.tatorsdodge.com/

 

[MTGTS]

http://www.tatorsdodge.com/

ok, I had checked with arrow and they didn't have any as they are not doing the oil pump upgrade anymore for the G2's. I'll give Chuck a call

 

[MTGTS]

http://www.tatorsdodge.com/

Chuck does not have them or know where they are available beside trying to get one out of a bad cover.

 

[Catwood]

OK, I bought some 5/8' metal caps from Napa, they are not the same as the ones that come out. I was able to reuse the ones I pulled though. The ones in the car are thinner wall and longer, though they are still 5/8" around.